• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2004.04a
• /
• pp.57-64
• /
• 2004

Stay cables, such as are used in cable-stayed bridges, are prone to vibration due to their low inherent damping characteristics. Several methods have been proposed and implemented to mitigate this problem, though each has its limitations. Recently some studies have shown that semiactive dampers can potentially achieve performance levels nearly the same as comparable active devices with few of the detractions. This paper presents the results of a study to evaluate the performance of semiactive dampers for mitigating the vibration of stay cables. Moreover, a number of recently proposed semiactive control algorithms are formulated for use with shear mode MR damper to compare the efficiency of each algorithm through numerical simulation. Numerical simulation considers a stay cable excited by shaker and controlled by shear mode MR dampers. In simulation, the response with a semiactive damper is found to be dramatically reduced compared to the uncontrolled case. Furthermore, it is verified that the algorithm based on Lyapunov control theory is very efficient in mitigating the cable vibration.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.557-560
• /
• 2009

본 연구에서는 건물의 규모, 용도 및 형식 등에 따라 다양하게 요구되는 성능에 대응할 수 있도록 하기 위한 성능설계에 대한 개념을 검증하고, 강구조 건축물의 특성을 고려한 성능레벨 및 성능한계에 대한 분류방법을 제안하였다. 또한 강구조 건축물의 경우 강도가 높고 경량인 특성에 의해 다른 구조형식에서는 크게 고려하지 않아도 되는 거주성능 및 진동특성을 제어하여 기능을 유지하기 위한 성능레벨을 설정하여 구조물이 항복하기 전의 성능레벨을 기능유지 및 무손상의 2단계로 제시하고, 이 때의 한계치를 기능한계 및 손상한계로 구분하였다. 강구조 건축물의 손상한계를 정의하기 위해 강구조 건축물의 설계 예를 이용하여 항복 층간변형각을 조사하였다. 그 결과 구조물의 손상발생을 억제할 수 있는 손상한계를 규정하기 위해 주로 사용하고 있는 층간변형각은 구조형식 및 설계방법에 따라 편차가 크게 나타나고 있으므로 손상한계치의 층간변형각을 임의로 설정하는 것은 매우 어려우며 향후 이에 대한 해석적, 실험적 검증이 필요할 것으로 판단되었다.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.11 no.1 s.53
• /
• pp.11-19
• /
• 2007

This paper proposes an optimal design method of distribution and capacities of linear viscous dampers for vibration control of two adjacent buildings. The previous researches have dealt with suboptimal design problem under the assumption that linear viscous dampers are distributed uniformly or proportionally to the sensitivity of the modal damping ratio according to floors, whereas this study deals with global optimization problem in which the damping capacities of each floor are independently selected as design parameters. For this purpose, genetic algorithm to effectively search multiple design variables in large searching domains is adopted and objective function leading to the global optimal solutions is established through the comparison of several optimal design values obtained from different objective functions with control performance and damping capacity. The effectiveness of the proposed method is investigated by comparing the control performance and total damping capacity designed by the proposed method with those of the previous method. In addition, the time history analyses are performed by using three historical earthquakes with different frequency contents, and the simulation results demonstrate that the proposed method is an effective seismic design method for the vibration control of the adjacent structures.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.6
• /
• pp.12-18
• /
• 2021

The purpose of this study is to effectively mitigate the bending displacement that occurs in the bridge due to forced vibration. We developed CTMD (Combine Tuned Mass Damper) that combines the relationship between spring and mass to control the bending behavior of simple beams. The experiment was conducted to confirm the control effect according to the change in the mass ratio of the developed CTMD. The developed CTMD is designed and manufactured so that the mass ratio can be adjusted according to the characteristics of the bridge. The maximum load of the spring applied to CTMD was fixed at 33.15 N. In order to evaluate the performance of the developed CTMD, a simple beam composed of hinges and rollers as boundary conditions was fabricated. In the experimental method, a CTMD was installed in the center of a simple beam and the deflection displacement according to the mass ratio was measured. The shaking condition was shaken at 3 Hz to induce the maximum bending behavior of the simple beam. As a result of the experiment, it was confirmed that when the optimal mass ratio was 2.1, the damping rate of the bending behavior displacement was about 71.2 %, indicating the best control effect.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.13 no.4
• /
• pp.67-76
• /
• 2009

Recently, the active interaction control (AIC) system was proposed as a semi-active control system. The AIC system consists of a primary structure and an auxiliary structure. The objective of the AIC system is to control the response of the primary structure through engagement and disengagement between the primary and auxiliary structures. Previous switching control algorithms have been shown to be effective in reducing the response of the primary structure. However, they have the main drawback of requiring an excessive engagement-disengagement frequency and high interaction force. In this paper, the regions in which the switching is activated and the regions in which the switching is deactivated are described separately, to effectively determine the engagement or the disengagement. The general relationship between the switching regions and the deactivated switching regions selected according to the engagement-disengagement conditions is described within the newly-developed comprehensive switching framework. The proposed engagement-disengagement conditions are designed within a comprehensive switching framework, to reduce engagement-disengagement frequency and interaction force. Furthermore, the effect of a control sampling period on the AIC system is explained in terms of the engagement-disengagement frequency. The effectiveness of the proposed algorithms and the effect of the control sampling period are considered for a single degree of freedom model under free vibration. It is observed that increasing the duration of stay by using a large control sampling period prevents the AIC system from activating the possible chance of switching. The proposed algorithms are shown to be effective, both in restricting ineffective switching and in reducing interaction force.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.21 no.5
• /
• pp.465-474
• /
• 2008

The real-time hybrid testing method(RT-HYTEM) is a structural testing technique in which the numerical integration of the equation of motion for a numerical substructure and the physical testing for an experimental substructure are performed simultaneously in real-time. This study presents the quantitative evaluation of the seismic performance of a building structure installed with an passive and semi-active MR damper by using RT-HYTEM. The building model that was identified from the force-vibration testing results of a real-scaled 5-story building is used as the numerical substructure, and an MR damper corresponding to an experimental substructure is physically tested by using the universal testing machine(UTM). The RT-HYTEM implemented in this study is validated because the real-time hybrid testing results obtained by application of sinusoidal and earthquake excitations and the corresponding analytical results obtained by using the Bouc-Wen model as the control force of the MR damper respect to input currents were in good agreement. Also for preliminary study, some semi-active control algorithms were applied to the MR damper in order to control the structural responses optimally. Comparing between the test results of semi-active control using RT-HYTEM and numerical analysis results show that the RT-HYTEM is more resonable than numerical analysis to evaluate the performance of semi-active control algorithms.

• Journal of Korean Association for Spatial Structures
• /
• v.12 no.2
• /
• pp.99-108
• /
• 2012

Microvibration problem of high-technology facilities, such as semi-conductor plants and TFT-LCD plants, has been considered as important factors that affects the performance of products and thus it is regarded as important in facilities with high precision equipments. In this paper, various base isolation control systems are used to investigate their microvibration control performance. To this end, train-induced ground acceleration is used for time history analysis and three-story example building structure is employed. Microvibration control performance of passive and smart base isolation systems have been investigated in this study. Based on numerical simulation results, it has been verified that smart base isolation system can control microvibration of a high-technology facility subjected to train-induced excitation.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.5
• /
• pp.1139-1144
• /
• 2012

The ration of payload to weight of industrial robot amounts form 1:10 to 1:30. Compared with man who have a ration of 3:1, it is very low. One of the goals for the next generation of robots will be a ration. This might be possible only by developing lightweight robots. When two-link flexible arm is rotated about an joint axis, transverse vibration may occur. In this paper, vibration dynamics of flexible arm is modeled by using Bernoulli-Euler beam theory and Lagrange equation. Using the fact that matrix $\dot{D}-2C$ is skew symmetric, new controllers which have a simplified structure with less computational burden is proposed by using Lyapunov stability theory. We propose deterministic and adaptive control laws for two link flexible arm, and the validity of the proposed control scheme is shown in computer simulation for two-link flexible arm.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1992.10a
• /
• pp.8-13
• /
• 1992

최근 우리 나라도 자동차의 수요가 급격히 늘어나고 있고, 생산량도 급증하 고 있어 자동차 공업이 산업의 최고의 위치를 확보하게 되었다. 자동차는 최 신 종합 기계 구조물로서 전기, 전자, 제어에 이르기까지 거의 모든 분양의 학문적 이론과 기술을 도입하는 최첨단의 기계 장비인것이다. 따라서 그 부 가가치 또한 매우 큰 것이다. 자동차의 성능을 결정짓는 가장 커다란 요소는 주행 성능과 안정성 및 조종성이다. 주행성능이라 함은 자동차의 종방향 운 동에 관한 성능으로서 기관의 동력에 지배적인 영향을 받는 성능(동력 성능) 과 그 밖의 성능(타향 성능, 제동 성능)으로 구분된다. 또 안정성과 조종성이 라함은 자동차의 횡방향 운동에 관한 성능으로서 로울링과 요우잉을 포함시 킨 곡선 운동에 관한 성능을 일컫는다. 이러한 운동 성능을 좌우하는 것은 구조적인 설계의 양부와 스프링이나 댐퍼의 성능일 것이다. 자동차의 수많은 부품 중의 다수가 국산화 되어 있지 아니하고, 또한 이러한 부품들의 성능을 시험할 수 있는 장비의 수입 의존도가 높은 것은 업계나 학계 등에서 앞으 로 많은 연구가 이루어져야 할 점이다. 자동차의 충격 흡수기(shock absorber)의 검사기도 또한 수입 시험기에 의존하고 있었던 것이 현실이었 다. 이에 본 연구진은 이 검사기의 국산화에 착수 한 것이다. 자동차에 있어 서 충격 흡수기는 지면에서 오는 충격을 급속히 흡수하는 역할을 하여 자동 차의 주행 성능과 안정성을 높혀 주며, 승차감을 높혀 주는 중요한 부품이 다. 따라서 충격 흡수기의 양부의 판정은 대단히 중요한 것이다. 본 연구에 서는 충격 흡수기의 충격 흡수력(감쇠력)을 측정하여 감쇠 특성을 정도 높게 파악할 수 있는 시험기를 만드는데 그 목적을 두고 있다. 연구는 시험기의 구동부를 제작하는 기계부와, 제어 및 계측의 하드웨어를 담당하는 전기.전 자부및 실제로 기계를 구동, 제어하고 측정 결과를 기록하고 출력하는 부분 을 담당하는 소프트웨어 개발부로 나누어서 진행하였다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.31 no.5
• /
• pp.227-234
• /
• 2018

Researches regarding measurement and control of the dynamic behavior of liquid such as sloshing have been actively on undertaken in various engineering fields. Liquid vibration is being measured in the study of tuned liquid dampers(TLDs), which attenuates wind motion of buildings even in building structures. To overcome the limitations of existing wave height measurement sensors, a method of measuring liquid vibration in a TLD using a laser Doppler vibrometer(LDV) and galvanometer scanner is proposed in this paper: the principle of measuring speed and displacement is discussed; a system of multi-point measurement with a single point of LDV according to the operating principles of the galvanometer scanner is established. 4-point liquid vibration on the TLD is measured, and the time domain data of each point is compared with the conventional video sensing data. It was confirmed that the waveform is transformed into the traveling wave and the standing wave. In addition, the data with measurement delay are cross-correlated to perform singular value decomposition. The natural frequencies and mode shapes are compared using theoretical and video sensing results.