• Journal of the Society of Naval Architects of Korea
• /
• v.28 no.2
• /
• pp.207-227
• /
• 1991

The impact of the system reliability analysis to structural design is described in this paper and various methods for system reliability analysis developed up to the present are reviewed and discussed from the view point of their efficiency. The paper also includes the detailed formulation procedure of the, so called, extended incremental load method has applied to relatively simple structure to show its usefulness.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.7 no.4
• /
• pp.217-224
• /
• 2003

The objective of this paper is to suggest the technique of program to perform structural optimization design after reliability analysis to consider the uncertainties of structural reponses. AFOSM method is used for reliability analysis then, structural optimization design is developed for 10-bar truss and 3 span 10 stories planar frame model is subject to reliability indices and probability of failure by reliability analysis. SQP method is used for optimization design method, this method has many attractions. As a result of analyzing with having and not having constraints and uncertainty, the minimum weight of truss and planar frame increased respectively 20.92% and average 8.08%.

• Proceedings of the KIEE Conference
• /
• 2005.10c
• /
• pp.6-8
• /
• 2005

스프링 조작기는 초고압 GIS, GCB 등의 개폐장치를 구동시키는 조작 장치로서 동작 중 부품에 큰 충격력 및 힘이 작용하여 파손되는 경우가 발생한다. 이에 개발 설계 단계에서 스프링 조작기의 구조적 건전성 확보를 위해 각 부품에 작용하는 힘을 예측하여 평가, 검증하는 해석 및 시험 기술이 요구된다. 본 논문에서는 145kV GIS용 스프링 조작기를 ADAMS로 다물체 동역학 해석을 수행하여 추출한 부품의 조인트 반력을 이용하여 응력 해석을 수행하였다. 그리고 그 결과와 응력측정 시험 데이터와의 비교를 통해 해석의 신뢰성을 검증할 수 있었다. 여기서는 한 예로 커넥팅 로드에 대한 신뢰성 평가를 시행하였다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.21 no.5
• /
• pp.405-409
• /
• 2009

Reliability analysis of coastal structure using importance sampling was shown. When Monte Carlo simulation is used to evaluate overturng failure probability of coastal structure, very low failure probability leads to drastic increase in simulation time. However, importance sampling which uses randomly chosen design candidates around the failure surface makes it possible to analyze very low failure probability efficiently. In the numerical example, failure probability of caisson type quay wall was analyzed by using importance sampling and performance according to the level of failure probability was shown.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.3A
• /
• pp.193-200
• /
• 2010

Structural design requires simultaneously to ensure safety by considering quantitatively uncertainties in the applied loadings, material properties and fabrication error and to maximize economical efficiency. As a solution, system reliability-based design optimization (SRBDO), which takes into consideration both uncertainties and economical efficiency, has been extensively researched and numerous attempts have been done to apply it to structural design. Contrary to conventional deterministic optimization, SRBDO involves the evaluation of component and system probabilistic constraints. However, because of the complicated algorithm for calculating component reliability indices and system reliability, excessive computational time is required when the large-scale finite element analysis is involved in evaluating the probabilistic constraints. Accordingly, an algorithm for SRBDO exhibiting improved stability and efficiency needs to be developed for the large-scale problems. In this study, a more stable and efficient SRBDO based on the performance measure approach (PMA) is developed. PMA shows good performance when it is applied to reliability-based design optimization (RBDO) which has only component probabilistic constraints. However, PMA could not be applied to SRBDO because PMA only calculates the probabilistic performance measure for limit state functions and does not evaluate the reliability indices. In order to overcome these difficulties, the decoupled algorithm is proposed where RBDO based on PMA is sequentially performed with updated target component reliability indices until the calculated system reliability index approaches the target system reliability index. Through a mathematical problem and ten-bar truss problem, the proposed method shows better convergence and efficiency than other approaches.

• Computational Structural Engineering
• /
• v.4 no.2
• /
• pp.119-129
• /
• 1991

This study is directed for the development of an efficient Importance Sampling Technique for system reliability analysis of bridge structures. Many methods have been proposed for structural reliability assessment such as the First-order Second-Moment Method, the Advanced Second-Moment Method, Monte Carlo Simulation, etc. The Importance Sampling Technique can be employed to obtain accurate estimates for the system reliability with reasonable computation effort. Based on the results of example analysis, it may be concluded that Importance Sampling Technique is a very effective tool for the system reliability analysis.

• Journal of the Society of Naval Architects of Korea
• /
• v.28 no.1
• /
• pp.189-196
• /
• 1991

This paper is an illustration of the application of the reliability analysis to the transverse structure of a SWATH ship. The ultimate strength of plate members on the cross structure and upper part of strut are considered in the reliability analysis. The fatigue reliability analysis has been also carried out at the junction of cross structure, sponsors and strut. Included is also an example of the allowable fatigue damage level. Demonstrated is the reliability study of series system of which elements are the ultimate and fatigue failure as well. Doing this would be desirable to get a truer solution of the structural safety level. The paper ends with a brief summary of the present reliability study and same important points which may be useful at the design stage.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.05a
• /
• pp.1014-1020
• /
• 1995

고온구조물은 고온에서의 운전상태에 따라 복잡한 하중이력을 경험하게 됨으로써 상온에서 발생하는 손상 기구와는 달리 온도 의존성을 가질 뿐만 아니라, 상온에서 볼 수 없는 크립-피로의 상호작용에 의한 손상현상이 나타나게 된다. 따라서 고온 구조물의 건전성 평가를 위한 비탄성 해석을 신뢰성 있게 수행하기 위해서는 구조물의 비선형 거동을 비교적 정확히 예측할 수 있는 통합 구성방정식의 개발 및 적용과 온도에 따른 재료의 물성치 확보가 필수적이다. 본 연구에서는 통합 점소성 모델인 수정된 Chaboche 모델에 대해서 내연적 시간 적분법을 적용하여 ABAQUS의 UMAT으로 구현하였고, 개발된 프로그램을 이용하여 INCONEL 718을 사용한 단순 인장해석, 반복 소성 특성해석 및 크립 해석을 수행하여 프로그램의 신뢰성을 평가하였다. 또한 원공이 있는 평판에 대한 예제해석을 수행함으로써 개발된 프로그램이 고온구조물의 건전성 평가를 위한 비탄성 해석에 적절하게 적용될 수 있음을 확인하였다.

• Journal of the Society of Naval Architects of Korea
• /
• v.35 no.2
• /
• pp.74-82
• /
• 1998

To evaluate the reliability against fatigue failure of offshore structures, a fatigue reliability analysis model based on the probabilistic approach has been developed. In this model, the simplified method is adopted as a fatigue analysis method. The uncertainties included in the fatigue analysis are considered as random variables and their statistical properties are evaluated as quantitatively as possible using existing data. As an example, the developed fatigue reliability model is applied to the jacket. And then the relative significance of each uncertainty on the probability of fatigue failure is surveyed.

• Journal of the Society of Naval Architects of Korea
• /
• v.30 no.1
• /
• pp.115-124
• /
• 1993

A structural system reliability analysis is studied for the safety assessment of midship section. Probabilistically dominant collapse modes are generated by Element Replacement Method and Incrimental Load Method. In order to avoid generating the same modes repeatedly, it is branched at final plastic hinge. Using first and second order bound methods, system failure probability of midship section is computed and compared with deterministic load factor method to show the usefulness of the proposed method.