• Journal of Korean Society of Forest Science
• /
• v.102 no.1
• /
• pp.90-96
• /
• 2013

This study was conducted to investigate a stability trend within 6 above average and 4 blow average erosion control dams, which were selected by The Korean Association of Soil and Water Conservation and were built in 1990s in Gyeonggi and Gangwon Province. The study was aimed to measure rebound hardness of upstream face, flood way and downstream face from those dams selected by using 'Concrete Test Hammer'. The main purposes of the study are selection of compression strength prediction equation and scope of wavelength, which successfully demonstrate non-destructive test results for erosion control dams. There is an opportunity to increase disaster prevention ability when stability vulnerability of concrete erosion control dam is detected in a timely manner. Results of the compression strength investigation express that there is a consistency with visual inspection of stability that has been processed by The Korean Association of Soil and Water Conservation. We concluded that a prediction equation, which was developed by Architectural Institute of Japan (AIJ), shows highest suitability in Korean erosion control dams when stability investigation is performed. The detailed criteria for the test result are 'stable', 'detail inspection required' and 'poor' for over 300 $kgf/cm^2$, 250~300 $kgf/cm^2$ and below 250 $kgf/cm^2$ respectively. Standards for stability of Korean erosion control dam and a compression strength prediction equation (that corresponds to the standards of the stability) should be established on the basis of chronological data of erosion control dam compression strength. Systematical approach for stability inspection that carries out remodeling or repair when problem on erosion control structures are detected through visual inspection and simple stability test, is necessary for the future disaster prevention.

• Korean Journal of Environment and Ecology
• /
• v.29 no.4
• /
• pp.580-589
• /
• 2015

The artificially grown forests of larch, planted in accordance with the nationwide afforestation policy in the 1970s, are located inside national parks. This study intended to induce a forestation system by which the forests develop into an ecologically healthy and broadleaved ecosystem with broad species diversity. For this, the aspects of natural regeneration of broadleaves from 2010 to 2013 after thinning by density (30%, 50%, and 70%) in 2009 were surveyed using the larch forest in the Woljeong Temple region inside Odaesan National Park. There were no trees that were larger than 2 cm in in diameter at breast height among the trees recently introduced between 2012 and 2013. A significant number of herbs have been introduced to the subsurface alongside young arboreal trees species such as Bumalda bladdernut, Acer triflorum, Cornus controversa etc and shrubs. However, many woody species did not survive the competition with herbs and repeated withering and regeneration. The number of woody species generated within the 30% cutting area was 440 species in 2013 and this figure has been increasing twofold each year. The number of woody plants within the 50% cutting area also showed an upward tendency and most plants did not survive in the competition with herbs and Sasa borealis and withered in only 1 ~ 2 years after generation. Unlike other thinning areas, the 70% cutting area showed 608 broadleaved trees, reflecting a decrease from 748 trees in 2012. This appeared to be attributed to the luxuriance of S. borealis and the sharp increase of fatsia following the inflow of total sunlight to the forest floor. Herbs were hardly generated due to the influence of S. borealis. Regarding the density for thinning at 50% or upper height, the forest treatment division shall maintain a proper density in the course of inducing artificial forestation of larch into natural broadleaved forests considering the luxuriance of sasa borealis and herbs due to the inflow of total sunlight to the forest floor.

• Clean Technology
• /
• v.24 no.2
• /
• pp.127-134
• /
• 2018

To reduce the environmental pollution by $NO_x$ from ship engine, International maritime organization (IMO) announced Tier III regulation, which is the emmision regulation of ship's exhaust gas in Emission control area (ECA). Selective catalytic reduction (SCR) process is the most commercial $De-NO_x$ system in order to meet the requirement of Tier III regulation. In generally, commercial ceramic honeycomb SCR catalyst has been installed in SCR reactor inside marine vessel engine. However, the ceramic honeycomb SCR catalyst has some serious issues such as low strength and easy destroution at high velocity of exhaust gas from the marine engine. For these reasons, we design to metallic structured catalyst in order to compensate the defects of the ceramic honeycomb catalyst for applying marine SCR system. Especially, metallic structured catalyst has many advantages such as robustness, compactness, lightness, and high thermal conductivity etc. In this study, in order to support catalyst on metal substrate, coating slurry is prepared by changing binder. we successfully fabricate the metallic structured catalyst with strong adhesion by coating, drying, and calcination process. And we carry out the SCR performance and durability such as sonication and dropping test for the prepared samples. The MFC01 shows above 95% of $NO_x$ conversion and much more robust and more stable compared to the commercial honeycomb catalyst. Based on the evaluation of characterization and performance test, we confirm that the proposed metallic structured catalyst in this study has high efficient and durability. Therefore, we suggest that the metallic structured catalyst may be a good alternative as a new type of SCR catalyst for marine SCR system.

• Korean Journal of Veterinary Pathology
• /
• v.6 no.2
• /
• pp.101-104
• /
• 2002

닭의 전신장기에 림프종 발생이 특정인 마렉병(Marek's disease; MD)은 림프구성 백혈병(Lymphoid leukosis; LL)과 병리학적 소견이 매우 유사하여 감별이 요구된다. 마렉병 바이러스(Marek's disease virus; MDV)는 질병초기에서 후기에 이르기까지 모낭상피세포에 세포용해성 감염을 지속적으로 일으킨다. 세포용해성 감염이 있는 모낭상피세포는 변성내지 괴사되어 있고 핵내봉입체가 관찰된다. 또한 세포용해성 감염이 있는 모낭상피세포 바로 밑의 진피와 깃털 수질(feather pulp)내의 혈관주위에 림프구 침윤이 관찰된다. 이러한 피부병변은 MD의 특징적인 병변들로서 LL과 감별할 수 있는 결정적인 단서이다. 본 고에서는 MD에 관한 전반적인 것과 특히 MD 진단을 위한 피부병변의 유용성에 대해서 자세히 논하고자 한다. 양계산업에 문제를 야기하고 있는 림프구 증식성 종양은 크게 마렉병(Marek’s disease; MD)과 백혈병(Lymphoid leukosis; LL)이 있다. 이들 질환의 원인체들이 분리되기 전까지는 이들 질병들은 발병부위에 따라 질병명을 붙였다. 즉, 내부장기냐 근육에 발생한 것은 visceral lymphomatosis, 피부에 발생한 것은 skin leukosis, 말초신경의 병변은 poly­n neuritis, neuritis, neurolymphomatosis gallinarum, range paralyis로 불리었다. 또한 눈에 발생한 것은 blindness, gray eye, iritis, uveitis, ocular lymphomatosis라고 불리었다. 1961년에 Biggs는 이러한 림프구 증식성 질병을 마렉병과 백혈병 으로 분류하자는 제안을 하였고, 드디어 1960년대 중반에 림프구 증식성 병변 중의 일부에서 herpesvirus가 분리되어서 Biggs가 제안한 병명인 마렉병을 본격적으로 사용하게 되었다. MD는 마렉병 바이러스(Marek’s disease virus; MDV)가 원 인제로서 닭에 전염성이 강한 염증성에서 종양성의 병변을 내부장기, 피부, 근육, 안구, 중추신경계, 말초신경계 등에 일 으킨다. MDV는 림프종을 유발하기 때문에 처음에는 사람에서 림프종을 유발하는 Epstein-Bar 바이러스와 관련이 있을 것으로 생각되어 gamma-herpesvirus로 분류되었지만, MDV의 게놈 구조와 세포배양에서 빠르게 성장한다는 점 때문에 지금은 alpha-herpesvirus로 재분류 되었다. MDV는 바이러스 중화시험과 한천 겔 침강법에 의해서 3개의 혈청형으로 분류 된다. 혈청형 1은 종양원성 바이러스와 종양원성 바이러스의 계대배양에 의한 약독주가 있다. 혈청형 2는 자연적으로 발 생하는 비종양원성 닭의 MDV이고, 혈정형 3은 바종양원성 칠면조 herpesvirus (HVT)이다. 림프종을 유발하는 MDV 감염은 4개의 과정, 즉 초기 세포용해성 감염, 잠복감염, 후기 세포용해성 감염, 마지막으로 종양화로 나눌 수 있다. 감염의 경로를 보면, 흡입된 MDV는 폐의 대식세포에 감염한 후 전선 장기로 MDV를 전파 시킨다. 특히, 흉선, F냥, 비장 등의 림프구에 초기 세포용해성 감염을 일으키는데, B 림프구가 주로 감염된다. 세포용해성 감염음 방어하기 위해 몰려든 T 림프구가 활성화가 되면, T 세포도 감염되게 된다. 잠복감염은 여러 가지 사이토카인 등 을 포함한 면역반응에 의해서 일어나며, 이 때 잠복감염된 세포는 특히 혈중의 T 세포라고 한다. 혈중 MDV 감염세포 는 피부 모낭상피세포, 선장 등 상피세포 유래의 조직에 MDV를 전파 시켜서 이들 조직에서 후기 세포용해성 감염이 일어나게 한다. 후기 세포용해성 감염을 유발하는 것은 이러한 MDV가 감염된 혈중 림프구라는 증거는 혈중의 세포 외에는 감염성 바이러스가 없기 때문이다. 후기 세포용해성 감염이 있는 후 육안적 혹은 현미경적으로 검출이 가능한 림프종이 여러 장기에서 관찰된다. MDV가 감염되면 병변 발생부위에 따라서 다양한 임상증상이 발생한다. 즉 내부장기에 병변이 있을 경우는 침울, 체중감소, 산란율 저하 등이 발생하며, 신경계는 발생부위별 신경증상이 일어난다. 이러한 장기나 조직에서는 육안적으로 백색에서 회백색의 종양성 병변이 관찰된다. 말초신경에 병변이 발생한 경우에는 특히 좌골신경 및 신경총에서 호발하는데, 이들 조직은 편측성 혹은 양측성으로 종창되어 있다. 안구는 간혹 육안적으로 식별이 가능한 홍채 퇴색 및 증식 병변이 관찰된다. 피부형 MD는 특히 육용계에서 문제가 되고 있으며, 산란계의 내장형 MD가 발생한 경우에도 피부를 자세히 설펴보면 피부형 MD를 간혹 관찰할 수 있다. 피부형 MD는 모낭주위에 원형의 결절형태로 발생하는데, 이들 병변이 커지면 바로 옆의 병변과 융합 되어 큰 결절을 형성하기도 한다. (중략)

• Journal of Life Science
• /
• v.20 no.3
• /
• pp.336-344
• /
• 2010

To assess population structure and genetic diversity among the Pacific cod (Gadus macrocephalus), we investigated mtDNA COI gene sequences of 7 populations. Samples were obtained from Sokcho, Wolsung, Geojedo, Yeosu, Geomundo and Westsouth in 2008 and 2009 (n=28). The sequence analysis of 28 individual samples showed 8 haplotypes, ranging in sequence divergence by pairwise comparisons from 0.2 to 2.2% (1 bp-11 bp). The Gal haplotype was found in Wolsung, Geojedo, Yeosu, Geomundo and Westsouth, and was regarded as the main haplotype of Korean Pacific cod. Ga2, Ga3, Ga6 and Ga7 haplotypes were found only in Sokcho. In the PHYLIP analysis, 8 haplotypes formed two independent groups: cladeA consisted of Ga2, Ga3, Ga6 and Ga7 haplotypes, whereas cladeB contained Gal, Ga4, Ga5 and Ga8 haplotypes. The genetic relationship between the two groups was weakly supported by bootstrap analysis(<50%). In pairwise comparisons between 6 populations other than that from Sokcho, a very high per generation migration ratio ($N_m$=infinite) and a very low level of geographic distance ($F_{sr}=-0.0123-(-0.0423)$) were observed. The estimates of genetic distance between Sokcho and the other localities were all statistically significant (p<0.05, p<0.01, p<0.001), indicating a limited mtDNA-based gene flow between Sokcho and other regions. The finding of the lowest genetic diversity in the Sokcho population (nucleotide diversity=0.00589) may be a result of relatively small population size and interrupted gene flow to other localities. Consequently, the overall considerable migration of Pacific cod population in Korea caused a genetically homogeneous structure to form, although a distinct population was found in this study.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.4
• /
• pp.424-434
• /
• 2009

Statement of problem: Problems such as loosening and fractures of retained screws and fracture of implant fixture have been frequently reported in implant prosthesis. Purpose: Implant has weak mechanical properties against lateral loading compared to vertical occlusal loading, and therefore, stress analysis of implant fixture depending on its material and geometric features is needed. Material and methods: Total 28 of external hexed implants were divided into 7 of 4 groups; Group A (3i, FULL $OSSEOTITE^{(R)}$Implant), Group B (Nobelbiocare, $Br{\aa}nemark$ $System^{(R)}$Mk III Groovy RP), Group C (Neobiotec, $SinusQuick^{TM}$ EB), Group D (Osstem, US-II). The type III gold alloy prostheses were fabricated using adequate UCLA gold abutments. Fixture, abutment screw, and abutment were connected and cross-sectioned vertically. Hardness test was conducted using MXT-$\alpha$. For fatigue fracture test, with MTS 810, the specimens were loaded to the extent of 60-600 N until fracture occurred. The fracture pattern of abutment screw and fixture was observed under scanning electron microscope. A comparative study of stress distribution and fracture area of abutment screw and fixture was carried out through finite element analysis Results: 1. In Vicker's hardness test of abutment screw, the highest value was measured in group A and lowest value was measured in group D. 2. In all implant groups, implant fixture fractures occurred mainly at the 3-4th fixture thread valley where tensile stress was concentrated. When the fatigue life was compared, significant difference was found between the group A, B, C and D (P<.05). 3. The fracture patterns of group B and group D showed complex failure type, a fracture behavior including transverse and longitudinal failure patterns in both fixture and abutment screw. In Group A and C, however, the transverse failure of fixture was only observed. 4. The finite element analysis infers that a fatigue crack started at the fixture surface. Conclusion: The maximum tensile stress was found in the implant fixture at the level of cortical bone. The fatigue fracture occurred when the dead space of implant fixture coincides with jig surface where the maximum tensile stress was generated. To increase implant durability, prevention of surrounding bone resorption is important. However, if the bone resorption progresses to the level of dead space, the frequency of implant fracture would increase. Thus, proper management is needed.

• Geophysics and Geophysical Exploration
• /
• v.21 no.3
• /
• pp.171-182
• /
• 2018

We performed the seismic field data processing using an open-source software (Madagascar) to verify if it is applicable to processing of field data, which has low signal-to-noise ratio and high uncertainties in velocities. The Madagascar, based on Python, is usually supposed to be better in the development of processing technologies due to its capabilities of multidimensional data analysis and reproducibility. However, this open-source software has not been widely used so far for field data processing because of complicated interfaces and data structure system. To verify the effectiveness of the Madagascar software on field data, we applied it to a typical seismic data processing flow including data loading, geometry build-up, F-K filter, predictive deconvolution, velocity analysis, normal moveout correction, stack, and migration. The field data for the test were acquired in Gunsan Basin, Yellow Sea using a streamer consisting of 480 channels and 4 arrays of air-guns. The results at all processing step are compared with those processed with Landmark's ProMAX (SeisSpace R5000) which is a commercial processing software. Madagascar shows relatively high efficiencies in data IO and management as well as reproducibility. Additionally, it shows quick and exact calculations in some automated procedures such as stacking velocity analysis. There were no remarkable differences in the results after applying the signal enhancement flows of both software. For the deeper part of the substructure image, however, the commercial software shows better results than the open-source software. This is simply because the commercial software has various flows for de-multiple and provides interactive processing environments for delicate processing works compared to Madagascar. Considering that many researchers around the world are developing various data processing algorithms for Madagascar, we can expect that the open-source software such as Madagascar can be widely used for commercial-level processing with the strength of expandability, cost effectiveness and reproducibility.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.30 no.2
• /
• pp.159-165
• /
• 2004

This study described about method that forms liquid crystal gel (LCG) by main ingredient with hydrogenated lechin (HL) in O/W emulsion system. Result of stability test is as following with most suitable LCG's composition. Composition of LCG is as following, to form liquid crystal, an emulsifier used 4.0wt% of cetostearyl alcohol (CA) by 4.0wt% of HL as a booster. Moisturizers contained 2wt% of glycerin and 3.0wt% of 1,3-butylene glycol (1,3-BG). Suitable emollients used 3.0wt% of cyclomethicone, 3.0wt% of isononyl isononanoate (ININ), 3.0wt% of cerpric/carprylic triglycerides (CCTG), 3.0wt% of macademia nut oil (MNO) in liquid crystal gel formation. On optimum conditions of LCG formation, the pHs were formed all well under acidity or alkalinity conditions (pH=4.0-11.0). Considering safety of skin, pH was the most suitable 6.0${\pm}$1.0 ranges. The stable hardness of LCG formation appeared best in 32 dyne/$\textrm{cm}^2$. Particle of LCG is forming size of 1-20$\mu\textrm{m}$ range, and confirmed that the most excellent LCG is formed in 1-6$\mu\textrm{m}$ range. According to result that observe shape of LCG with optical or polarization microscope, LCG could was formed, and confirmed that is forming multi -layer lamellar type structure around the LCG. Moisturizing effect measured clinical test about 20 volunteers. As a result, moisturizing effect of LCG compares to placebo cream was increased 36.6%. This could predicted that polyol group is appeared the actual state because is adsorbed much to round liquid crystal droplets to multi-lamellar layer's hydrophilic group. It could predicted that polyol group is vast quantity present phase that appear mixed because is adsorbed to round liquid crystal to multi-lamellar layer's hydrophilic group. This LCG formation theory may contribute greatly in cosmetics and pharmacy industry development.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.30 no.2
• /
• pp.181-187
• /
• 2004

Preparations of mesoporous materials using various templates and their applicability have been intensively investigated for many years. We studied on synthesizing mesoporous Ti02 with pores in which sensitive compounds having weak physico-chemical properties such as thermal or UV irradiation and low solubility in solvent are trapped. Prior to trapping OMC in the pores of mesoporous titania, OMC was nano-emulsified in O/W system using Lecithin. Thereafter the OMC was trapped in the pores of mesoporous titania using sol-gel method. Main focus of this work is to prepare OMC-trapped mesoporous titania and to trace the stability and solubility of nano-emulsified OMC in the pores of mesoporous titania, and compared with that of mesoporous silica. OMC-trapped mesoporous Inorganic-Organic hybrid titania showed higher factors in sun protecting and a skin penetration phenomenon was reduced.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.18 no.4
• /
• pp.366-377
• /
• 2016

Water use efficiency (WUE) is considered as an important ecological indicator which may provide information on the process-structure relationships associated with energy-matter-information flows in ecosystem. The WUE at ecosystem-level can be defined as the ratio of gross primary productivity (GPP) to evapotranspiration (ET). In this study, KoFlux's long-term (2007-2015) eddy covariance measurements of $CO_2$ and water vapor fluxes were used to examine the WUE of needle fir plantation in Korea National Arboretum. Our objective is to ascertain the seasonality and inter-annual variability in WUE of this needle fir plantation so that the results may be assimilated into the development of a holistic ecological indicator for resilience assessment. Our results show that the WUE of needle fir plantation is characterized by a concave seasonal pattern with a minimum ($1.8-3.3g\;C{\cdot}(kg\;H_2O)^{-1}$) in August and a maximum ($5.1-11.4g\;C{\cdot}(kg\;H_2O)^{-1}$) in February. During the growing season (April to October), WUE was on average $3.5{\pm}0.3g\;C\;(kg\;H_2O)^{-1}$. During the dormant seasons (November to March), WUE showed more variations with a mean of $7.4{\pm}1.0g\;C{\cdot}(kg\;H_2O)^{-1}$. These values are in the upper ranges of WUE reported in the literature for coniferous forests in temperate zone. Although the growing season was defined as the period from April to October, the actual length of the growing season (GSL) varied each year and its variation explained 62% of the inter-annual variability of the growing season WUE. This is the first study to quantify long-term changes in ecosystem-level WUE in Korea and the results can be used to test models, remote-sensing algorithms and resilience of forest ecosystem.