• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.3
• /
• pp.274-280
• /
• 2016

Hinge driving type holding and release mechanism based on the burn wire release for application of cubesat is main payload of STEP Cube Lab. (Cube Laboratory for Space Technology Experimental Project) to be launched at 2015. It has high constraint force, low shock level as well as surmounting drawbacks of conventional nichrome burn wire release method that has relatively low constraint force and system complexity for application of multi-deployable systems. In this paper, we have proposed a flight model of holding and release mechanism for the verification of the constraint force and deployment status signal acquisition. To validate the effectiveness of the flight model, launch and on-orbit environment verification test have been performed.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.788-791
• /
• 2004

This paper presents a general description of single and dual contact tooling systems, finite element analysis, and discussions on the application of the system to the 5-head router machine which is in particular for aerospace components. This study has been performed as part of the development of the new generation 5-head router machine which is designed for high productivity. Such high productivity in essence requires high speed rotation and multiple spindles in one machine. The high speed rotation may exceed a range in a conventional single contact tooling system. The conventional tooling system is reevaluated in comparison with the dual-contact system. Finite element analysis using simplified spindle models compares major differences in the two systems. Some problems in the application to the 5-head router machine are discussed.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.9
• /
• pp.2339-2348
• /
• 1994

The objective of this paper is to develop a solution method for the differential-algebraic equation(DAE) derived from constrained muti-body dynamic systems. Mechanical systems are often modeled as bodies and joints. Differential equations of motion are formulated for bodies. Since the bodies are connected by joint, the differential variables must satisfy the kinematic constraint equations that come from the joints. Difficulties are arised due to drift of the differential variables off the constraint equations. An optimization method is adopted to correct the drift of the differential variables. To demonstrate the efficiency of the proposed method a slider-crank mechanism is analyzed dynamically. Identical results are obtained as these from the commercial program DADS. Dynamic analysis of a High Mobility Multi-purpose Wheeled. Vehicle(HMMWV) is carried out to show the practicalism of the proposed method.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11a
• /
• pp.360-364
• /
• 2001

본 논문에서는 최근의 진화적 구조최적화(ESO) 전략을 회전축의 형상최적화에 적용하였으며, 각 계산 스텝마다 단위 유한요소의 크기를 변경함으로써 기존의 방법보다 빠르고 정확한 최적형상에 수렴하는 새로운 방법을 제시하였다. 축요소의 직경을 시스템 설계변수로 하였으며, 축중량의 감소, 공진배율(Q-factor)의 감소 및 충분한 위험속도의 분리여유를 갖도록 목적함수를 설정하였다. 불평형응답 및 굽힙응력의 구속조건을 부가하였으며, 목적함수에 대한 설계변수의 감도해석을 수행하였다. 전동기축계에 대한 적용 결과로부터 주파수와 동적 구속조건하의 로터베어링 시스템에 대한 축 형상 최적화에 ESO법이 효과적으로 이용될 수 있음을 확인하였다.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.5 s.43
• /
• pp.203-209
• /
• 2006

In this paper, proposed diversity algorithm that decrease fading. In the wireless channel, if fading occurs due to the multipaths the performance of the system is apparently reduced. This study applied tap-delay receiver. It applied QPSK and OQPSK modulation methods and applied the convolutional codes, where the code rate is 1/2 and 1/3 and the constraint length is 11 and the turbo code where the constraint length is 6. The diversity algorithm proposed in this paper could be compared and analyzed the average error probability of modulation method variable of fading factor to uplink and downlink channels.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.1
• /
• pp.12-23
• /
• 1994

This paper proposes an optimal design software for the open-chain dynamic systems whose governing equations are expressed as differential equation. In this software, an input module and an automatic creation module of the equation of motion are developed to contrive the user's convenience. To analyze the equation of motion of the dynamic systems, variable-order and variable-stepsize Adams-Bashforth-Moulton predictor-corrector method is used to improve the efficiency. For the optimization and the design sensitivity analysis, ALM(augmented lagrange multiplier)method and adjoint variable method are adopted respectively. An output module with which the user can compare and investigate the analysis and the optimization results through tables and graphs is also provided. The developed software is applied to three typical dynamic response optimization problems, and the results compare very well with those available in the literature, demonstrating its effectiveness.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.709-712
• /
• 2010

본 논문은 개미군락최적화 알고리즘을 이용한 트러스 구조물의 설계최적화에 대한 이론적 배경과 수치해석 결과를 기술하였다. 트러스의 설계최적화를 수행하기 위하여 구조물의 중량을 최소화하는 것을 목적 함수로 하고 구조물에서 발생하는 응력과 변위의 허용치를 초과하지 않는 것을 구속조건으로 이용하였다. 본 연구에서는 개미군락알고리즘을 구조물의 최적화에 적용하기 위하여 외판원문제(travelling salesman problem: TSP)를 재 정의하는 방법을 사용하였으며 최대-최소개미시스템(max-min ant system)을 도입하여 트러스 구조물의 최적설계를 수행하였다. 이때 이산화 된 설계변수를 사용하였으며 구속조건을 처리하기 위해서 벌점함수를 사용하였다. 본 연구를 통하여 개미군락최적화 알고리즘은 구조최적화에 그 적용 가능성이 높았으며 전통적인 최적검색 기법의 새로운 대안으로 이용될 수 있는 것으로 나타났다.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.3
• /
• pp.271-279
• /
• 2006

This study proposes a new diversity algorithm to improve the signal-to-noise ratio. In the wireless channel, if fading occurs due to the multipaths, the performance of the system is apparently reduced. One of the methods to reduce fadings like this is the diversity method, and this study aims to improve the performance of the system by proposing a new diversity algorithm. This study applied rake receiver It applied QPSK and OQPSK modulation methods and applied the convolutional codes, where the code rate is 1/3 and the constraint length is 9, and the turbo code where the constraint length is 4. Under these conditions, this study compared and analyzed the average error probability of Multicarrier CDMA system.

• Journal of the Korea Concrete Institute
• /
• v.25 no.6
• /
• pp.649-656
• /
• 2013

Coupled shear walls can provide an efficient structural system to resist lateral force. However, the reinforcement detail for diagonally reinforced coupling beams required by ACI-318 often causes the difficulties in construction due to the reinforcement congestion and interference among reinforcement. This paper is to evaluate cyclic behavior of High-Performance Fiber-Reinforced Cement Composite (HPFRCC) coupling beams having reduced transverse reinforcement around the beam perimeter. Experimental test was conducted using three specimens having a beam aspect ratio 2.0. Test results showed that HPFRCC coupling beams with half of transverse reinforcement required by ACI-318 provided similar energy dissipation capacities compared with the coupling beams having reinforcement satisfy the requirement of ACI-318.

• Journal of the Korea Concrete Institute
• /
• v.21 no.3
• /
• pp.319-326
• /
• 2009

Two parallel wide flange built-up beams are widely used as struts in resisting lateral earth pressure because of the effectiveness in structure and construction. In a certain structural system, the reinforced concrete columns are to be placed at the intersection where two perpendicular beams cross each other, the square part of the joint being filled with concrete. In the punching shear mechanism of the beam-column joint, the radial deformation caused due to shear cracking will be constrained by the spring action of the squarely encompassed beam flanges. As a result, the punching shear strength of the joint concrete can be expected to be increased. To verify this phenomenon experiments have been performed for various constraining elements and distances between columns and constraints. Test results are compared with the approximation analysis formula which has been proposed in this study, based on the code formula. The results calculated by the proposed equation show comparatively close agreement with the punching shear strength detected from the test.