• Analytical Science and Technology
• /
• v.12 no.2
• /
• pp.116-124
• /
• 1999

Adsorption characteristics of heavy metal ions, Cd(II) and Pb(II), on eastcoast-living algae, ulva pertusa, has been studied in our experiment. The Maximum adsorption amount of Cd(II) and Pb(II) ions on 1 g of the ulva pertusa were 2.3 mg, 3.1 mg in alkaline and 2.0 mg, 2.8 mg in acidic solution. However 3.4 mg, 7.3 mg in alkaline and 3.1 mg, 6.5 mg in acidic solution were shown on the Si-immobilized ulva pertusa in the same condition. Thus, Si-immobilized ulva pertusa adsorbs more amount of heavy metals, Cd(II), Pb(II), than the ulva pertusa, and more effective absorbent in alkaline. Furthermore, more amounts of Pb(II) ion were absorbed compare to Cd(II) ion in our work. Recovery ratio of Cd(II) and Pb(II) ions on the ulva pertusa were 55.0~61.0%, 59.7~66.8% respectively and 87.6~97.5%, 83.5~99.3% on the Si-immobilized ulva pertusa.

• The Korean Journal of Food And Nutrition
• /
• v.25 no.4
• /
• pp.842-849
• /
• 2012

The purpose of this study is to determine the possibility of using Agarum cribrosum as a natural health food source. To accomplish this purpose, the contents of the general and antioxidant activities of Agarum cribrosum were measured. The contents of carbohydrate, crude protein, crude lipid and ash were 45.4%, 15.0%, 2.3% and 33.1%. The calories of Agarum cribrosum were 262.3 kcal and total dietary fiber of Agarum cribrosum was 34.0%. The protein contained a total of 18 different kinds of amino acids. The content of amino acids was 12,402.42 mg/100 g. The K was the largest mineral followed by Ca, Na and Mg, implying that Agarum cribrosum is an alkali material. The antioxidant activity of Agarum cribrosum was assessed by various radical scavenging assays using DPPH (2,2-diphenyl-1-picrylhydrazyl), FRAP (ferric ion reducing antioxidant power), reducing power, and ABTS (2,2'-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid)). All antioxidant activity of Agarum cribrosum extract increased the concentration of the dependents. Total phenolic contents of Agarum cribrosum extract were $34.1{\pm}2.56mg/g$, and total flavonoids contents were estimated at $4.9{\pm}0.26mg/g$. General nutrients and other antioxidant bioactive materials in Agarum cribrosum were also potential materials for good health food. It is expected that a follow-up study of Agarum cribrosum through developing processed food and evaluation of their functional properties would provide useful information or sources of functional foods.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.9
• /
• pp.4277-4283
• /
• 2012

Slip coefficient, whose value is dependent on the condition of contact surface at the friction joint of high tension bolt, is determined by slip load. Because contact area affects slip load, contact area that varies with bolt hole size is also related to the slip coefficient. In this study, we manufactured 32 specimens and performed bending and tension tests in order to examine changes in slip coefficient and load with material type, bolt diameter, and size of bolt hole. Slip load of specimens with oversize bolt hole had strength that was more than 80% higher than the slip load of specimens with standard bolt hole, and it also exceeded the design slip strength. In addition, we observed significant correlation between net-section ratio and slip ratio of specimens with oversize and standard bolt hole. However, some differences between the specimens are thought to have been caused by reduction in initial axial force of high tension bolt, which is an important parameter of slip coefficient. It is self-evident that increased bolt hole size would lead to decrease in design strength as it reduces both slip coefficient and bolt axial force. Nevertheless, we suggest that some flexibility in regulation of bolt hole, as long as it does not threaten the structural stability, may be a positive factor in terms of workability and efficiency.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.6
• /
• pp.531-537
• /
• 2016

The damage and fracture of machine or structure are caused by the crack happened from the defect existed at the inside of material. The properties of crack propagation and growth characteristic must be considered because there are many cases at which these cracks are densely existed. Therefore, this study investigates the fracture property due to the position of crack and hole inside the standard compact tension (C. T.) specimen. When the concentrated load is applied eccentrically at the standard C. T. specimen, the fracture mechanical behavior due to the existence or non-existence and the position of hole near crack is investigated. As the result of analysis study, model 3 (in case of the distance of 2mm on the horizontal direction between the end part and hole as the specimen model existed with one hole near the crack) has the maximum deformation, stress and deformation energy of the most values among three models. As the distance between the crack and hole inside the specimen becomes nearer, the maximum stress becomes higher in cases of three models. Apart from the number of holes, it is seen that the maximum stress becomes higher near the crack when the hole exists near the crack inside the specimen. If the hole inside the machine or the mechanical structure is punctured by using the result of this study, it is thought that the occurred breakage or breakdown can be prevented by reducing the fracture stress happened at the specimen.

• The Korean Journal of Nuclear Medicine
• /
• v.38 no.1
• /
• pp.74-84
• /
• 2004

Purpose: Since I-125 emits low energy (27-35 keV) radiation, thinner crystal and collimator could be employed and, hence, it is favorable to obtain high quality images. The purpose of this study was to derive the optimized parameters of I-125 SPECT using a new simulation tool, GATE (Geant4 Application for Tomographic Emission). Materials and Methods: To validate the simulation method, gamma camera developed by Weisenberger et al. was modeled. Nal(T1) plate crystal was used and its thickness was determined by calculating detection efficiency. Spatial resolution and sensitivity curves were estimated by changing variable parameters for parallel-hole and pinhole collimator. Peformances of I-125 SPECT equipped with the optimal collimator were also estimated. Results: in the validation study, simulations were found to agree well with experimental measurements in spatial resolution (4%) and sensitivity (3%). In order to acquire 98% gamma ray detection efficiency, Nal(T1) thickness was determined to be 1 mm. Hole diameter (mm), length (mm) and shape were chosen to be 0.2:5:square and 0.5:10:hexagonal for high resolution (HR) and general purpose (GP) parallel-hole collimator, respectively. Hole diameter, channel height and acceptance angle of pinhole (PH) collimator were determined to be 0.25 mm, 0.1 mm and 90 degree. The spatial resolutions of reconstructed image of the I-125 SPECT employing HR:GP:PH were 1.2:1.7:0.8 mm. The sensitivities of HR:GP:PH were 39.7:71.9:5.5 cps/MBq. Conclusion: The optimal crystal and collimator parameters for I-125 Imaging were derived by simulation using GATE. The results indicate that excellent resolution and sensitivity imaging is feasible using I-125 SPECT.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.1056-1059
• /
• 2001

These days, as dynamic function and special properties to compare traditional material, $Al_20_3$ ceramic use all over the industry. But it is very difficult to process because of high hardness and brittleness. Therefore, in this paper, it was investigated that laser process parameter which can produce appropriate quality of $Al_20_3$ ceramic microhole machining.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1992.10a
• /
• pp.147-152
• /
• 1992

본 연구에서는 같은 직경의 2개 원형구멍이 동축상에 있는 4변고정, 등반성 정사각형판의 자유진동특성을 충격진동실험과 유한요소 해서방법으로 원형 구멍직경의 변화에 다른 고유진동수와 무차원 진동수 매개변수를 구하고자 한다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2000.10a
• /
• pp.548-550
• /
• 2000

본 논문은 재구성 가능한 메쉬(RMESH) 병렬 모델에서 상수 시간에 구멍이 있는 다각형의 한 점으로부터의 가시성 다각형을 구하는 문제를 고려한다. 알고리즘의 기본 전략은 프로세서의 수에 있어 준-최적인 상수 시간 알고리즘을 사용하여 문제의 크기를 감소시킴으로써 최적인 상수 시간 알고리즘을 얻는 것이다. 이 전략을 사용해 모두 N개의 에지로 구성된 구멍이 있는 다각형에 대한 가시성 다각형을 N$\times$N RMESH에서 상수 시간에 구하는 알고리즘을 제시한다. 이 알고리즘은 다각형들의 집합이 주어져 있을 때 외부의 한 점에서 가시 영역을 구하거나, 선분들의 집합이 주어져 있을 때 평면상의 한 점에서 가시 영역을 구하는 문제도 해결할 수 있다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.10a
• /
• pp.131-135
• /
• 1993

오늘날 전자산업, 광학기계,미세노즐 및 오리피스, 정밀공구,게이지, 고밀도 PCB 기판등 각종 산업에서 미세구멍 가공기술이 요구되고 있다. 이러한 구멍 가공에 사용될 수 있는 기술로는 드릴 가공의 기계적 가공방식 이외에 레이져가공,전자빔가공, 방전가공등의 열적가공방식과 전해가공,전해연마,화학부식의 화학적가공 방식이 있겠으나 생산성, 가공표면의 정도, 심혈가공의 어려움 등의 이유로 미세드릴을 이용한 기계적인 가공방법이 선호되고 있다. 본 연구에서는 미세구멍/가공시 가공토크에 미치는 중요 변수들의 영향을 실험을 통하여 조사하여 높은 절삭성을 발휘하는 동시에 공구의 파손도 피할 수 있는 조건을 제시하였다.

• Proceedings of the KIEE Conference
• /
• 2008.10b
• /
• pp.343-344
• /
• 2008

본 논문에서는 고층건물의 철골 구조물의 자동화된 볼트 체결을 위해 볼팅로봇에 장착된 카메라에 의한 영상정보를 처리하여 볼트 구멍을 인식하고 제어시스템에게 볼트 구멍의 위치를 알려주는 시스템을 제안한다. 볼팅로봇 전면에 설치된 광각 카메라를 이용하여 목표물까지 이동하고 로봇의 팔에 장착된 소형 카메라로 볼트 구멍을 인식하는 알고리즘을 제안하고 실제 볼팅로봇에 적용하여 그 성능을 평가하였으며 이는 볼팅로봇의 성능향상에 기여할 것이다.