• 한국해양학회지
• /
• v.27 no.4
• /
• pp.277-289
• /
• 1992

Kyeonggi Bay, a macrotidal coastal embayment in the Yellow Sea coast of central korea, is fringed by vastly developed tidal flats. About 400 surface sediment samples were collected from the intertidal and subtidal zones of Kyeonggi Bay for a study of the sediment distribution pattern and the surface sediment characteristics of this environment. The kyeonggi Bay surface sediment becomes progressively finer in the shoreward direction, from offshore sand to shoreward silty sand and sandy silt. This shoreward-fining trend is repeated again on the tidal flat and, as a consequence, a grain-size break occurs near the low-water line which separates the intertidal area from the subtidal one. The intertidal and subtidal sediments differ from each other in textural characteristics such as mean grain size and skewness and this can be interpreted to result from differences in hydraulic energy and morphology between the two environments. The mineral and chemical compositions of the Kyeonggi Bay sediments are largely controlled by the sediment grain size. Smectite was nearly absent in the clay mineral assemblage of Kyeonggi Bay sediment. The contents of Co, Cu and Ni were high in the Banweol tidal flat, which suggests a continuous process of accumulation of these metals. the intertidal environment appears to respond rapidly to artificial coastal modifications, the effects of which should be taken into consideration when planning a dam construction or coastal reclamation.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.7
• /
• pp.464-471
• /
• 2013

In this study, the resource efficiency and future metal resource requirement in photovoltaic (PV) production system were evaluated by using material balance data and life cycle assesment (LCA) method. As a result, in the resource efficiency of ferrous and non-ferrous metal, lead and tin had higher resource efficiency than other materials in all PV systems (SC-Si, MC-Si, CI(G)S, CdTe). In the resource efficiency of rare metals, gallium and rhenium in silicon system and rhenium and rhodium in thin-film system ranked as the first and second high resource efficiency. In case of rare earth metal, gadolinium and samarium took higher resource efficiency. The results of the future metal resource requirement in PV systems showed that 2,545,670 ton of aluminium, 92,069 ton of zinc, 22,044 ton of copper, 1,695 ton of tin and 31 ton of nickel will be needed by 2030 in South Korea, except resource recycling supplement.

• Clean Technology
• /
• v.26 no.3
• /
• pp.196-203
• /
• 2020

In this study, a Cu/hexaaluminate catalyst was prepared by a co-precipitation method, and then a binder was added to form a pellet. A catalyst in which Ni and Ru promoters were added to a Cu/hexaaluminate pellet catalyst was prepared. This study focused on examining the effect of the addition of Ni and Ru promoters on the properties of Cu/hexaaluminate catalysts and the decomposition reaction of ADN-based liquid monopropellants. Cu/hexaaluminate catalysts had few micropores and well-developed mesopores. When Ru was added as a promoter to the Cu/hexaaluminate pellet catalyst, the pore volume and pore size increased significantly. In the thermal decomposition reaction of ADN-based liquid monopropellant, the decomposition onset temperature was 170.2 ℃. Meanwhile, the decomposition onset temperature was significantly reduced to 93.5 ℃ when the Cu/hexaaluminate pellet catalyst was employed. When 1% or 3% of Ru were added as a promoter, the decomposition onset temperatures of ADN-based liquid monopropellant were lowered to 91.0 ℃ and 83.3 ℃, respectively. This means that the Ru promoter is effective in lowering the decomposition onset temperature of the ADN-based liquid monopropellant because the Ru metal has excellent activity in the decomposition reaction of ADN-based liquid monopropellant, simultaneously contributing to the increase of the pore volume and pore size. After the thermal treatment at 1,200 ℃ and decomposition of ADN-based liquid monopropellant were repeatedly performed, it was confirmed that the addition of Ru could enhance the heat resistance of the Cu/hexaaluminate pellet catalyst.

• Journal of Korean Society of Water and Wastewater
• /
• v.28 no.2
• /
• pp.207-215
• /
• 2014

Wastewater containing heavy metals such as copper (Cu) and nickel (Ni) is harmful to humans and the environment due to its high toxicity. Crystallization in a fluidized bed reactor (FBR) has recently received significant attention for heavy metal removal and recovery. It is necessary to find optimum reaction conditions to enhance crystallization efficacy. In this study, the effects of crystallization reagent and pH were investigated to maximize crystallization efficacy of Cu-S and Ni-S in a FBR. CaS and $Na_2S{\cdot}9H_2O$ were used as crystallization reagent, and pH were varied in the range of 1 to 7. Additionally, each optimum crystallization condition for Cu and Ni were sequentially employed in two FBRs for their selective removal from the mixture of Cu and Ni. As major results, the crystallization of Cu was most effective in the range of pH 1-2 for both CaS and $Na_2S{\cdot}9H_2O$ reagents. At pH 1, Cu was completely removed within five minutes. Ni showed a superior reactivity with S in $Na_2S{\cdot}9H_2O$ compared to that in CaS at pH 7. When applying each optimum crystallization condition sequentially, only Cu was firstly crystallized at pH 1 with CaS, and then, in the second FBR, the residual Ni was completely removed at pH 7 with $Na_2S{\cdot}9H_2O$. Each crystal recovered from two different FBRs was mainly composed of CuxSy and NiS, respectively. Our results revealed that Cu and Ni can be selectively recovered as reusable resources from the mixture by controlling pH and choosing crystallization reagent accordingly.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.7
• /
• pp.377-386
• /
• 2016

The purposes of this research are to examine soil pollution in the nation and to explore the contaminated soil management of the public housing agency in public land for residential development. In so doing, the primary and secondary data were utilized, the former made use of the public data annually released by the Korea Ministry of Environment, and the latter relied on a self-administerd questionnaire survey conducted in the staff of the public housing agency, particularly those in charge of soil contamination in large-scale land, housing and urban development projects. The findings reveal that the national concentrations of 21 inorganic and organic soil contaminants (e.g., Cd, Cu, As, Hg, Pb, Cr, Zn, Ni, F, P, PCB, CN, Phenol, BTEX, TPH, TCE, PCE, Benzo(a)pyrene, and pH) in the land were extracted to be well below the risk level designated by the statutory guidance while industrial areas had them at a relatively modest level. In addition, the survey results indicate that the public housing agency didn't establish specific and clear guidelines for soil pollution and its remediation in the residential land development, so that contaminated sites have been primarily remediated by outsourcing companies. As the unexpected occurrence of contaminated sites causes the incurring expenses added to total project budget, the provision of both professional training and on-site manuals with the sufficient information on techniques and methods of soil contamination is critical to promptly and systematically deal with soil pollution.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.5
• /
• pp.359-366
• /
• 2014

For an efficient and reasonable management scheme for protecting the soil environment, a soil ecological risk assessment (ERA) method should be developed prior to utilization, based on the contemporary uses and situations of each country. The Korean environmental policy focusing on soil protection is currently accelerating the development of the soil ecological risk assessment method. The soil ERA requires toxicological data on various trophic levels in the soil environment, and ultimately uses PNEC (Predicted No Effect Concentration), which is derived from collected toxicological data. Therefore, test species that are used to generate toxicity data are essential for conducting reliable ERA. This study aimed to select domestic test species for potential use in a reliable Korean ERA. Copper (Cu) and Nickel (Ni) were identified as target substances, with toxicity data (Cu, Ni) and standard test methods being collected to determine candidate species. The candidate species were first classified by soil trophic level, and then sorted into final domestic species. Forty out of 166 domestic species were determined as potential standard test species, whereas 17 out of 120 species were determined as potential Cu and Ni test species. Finally, this study presented potential soil test species based on the characteristics of the domestic soil environment, and established a preliminary step toward developing a reliable Korean soil ERA method.

• Analytical Science and Technology
• /
• v.11 no.5
• /
• pp.366-373
• /
• 1998

Polydentate Schiff base ligands, BSDT(1,9-bis(2-hydroxyphenyl)-2,5,8-triaza-1,8-nonadiene) having $N_3O_2$ atoms, BSTT(1,12-bis(2-hydroxyphenyl)-2,5,8,11-tetraaza-1,11-dodecadiene) having $N_4O_2$ atoms, BSTP(1,15-bis(2-hydroxyphenyl)-2,5,8,11,14-pentaaza-1,14-pentadodecadiene) having $N_5O_2$ atoms were synthesized. Protonation constants of these polydentate ligands were measured by potentiometry. Stability constants of the complexes between these ligands and the metal ions such as Cu(II), Ni(II) and Zn(II) were measured in DMSO by a polarographic method. It was observed that all metal(II) ions employed in this study formed 1:1 complexes with Schiff base ligands. Stability constants for the complex formation were in the order of Cu(II)>Ni(II)>Zn(II), and for the ligands were in the order of BSTP>BSTT>BSDT. There are due to the increase in the number of donor atoms. Both enthalpy and entropy changes were obtained in negative values. Exothermicity for the complex formation indicated tight binding between the ligands and metal ions. The negative entropy change would be related to the fact that solvent molecules are strongly interacting with the metal complexes.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.25 no.2
• /
• pp.42-53
• /
• 2020

In this study, heavy metal in road-deposited sediments (RDS) and marine sediment around Gwangyang Bay area have been investigated to assess the pollution status of metals and to understand the environmental impact of RDS as a potential source of metal pollution. Zn concentration for <63 ㎛ size fraction was the highest (2,982 mg/kg), followed by Cr, Ni, Pb, Cu, As, Cd, and Hg. Metal concentrations in RDS increased with decreasing particle size and relatively higher concentrations were observed around the metal waste and recycling facilities. For particle size in RDS smaller than 125 ㎛, EF values indicated that Zn was very high enrichment and Cr, Cd, Pb were significant enrichment. The concentrations of metals in marine sediments were mostly below the TEL value of sediment quality guidelines of Korea. However, the Zn concentrations has increased by 30~40% compared to 2010 year. The amounts of Zn, Cd and Pb in less than 125 ㎛ fraction where heavy metals can be easily transported by stormwater runoff accounted for 54% of the total RDS. The study area was greatly affected by Zn pollution due to corrosion of Zn plating materials by traffic activity as well as artificial activities related to the container logistics at Gwangyang container terminal. The fine particles of RDS are not only easily resuspended by wind and vehicle movement, but are also transported to the surrounding environments by runoff. Therefore, further research is needed on the adverse effects on the environment and ecosystem.

• 한국해양학회지
• /
• v.29 no.4
• /
• pp.338-356
• /
• 1994

Sediment samples from the continental shelf of the South Sea of Korea are analysed to determine the concentration of Al, Fe, Mn, cu, Ni, Zn, Co, Cr and Pb. among these samples, fine-grained sediments were also analysed by a sequential extraction technique to know geochemical forms of the metals in this environments. The total concentration of Al, Fe, Cr, Ni, Cu and Zn in bulk sediments decreased gradually with the increase of distance from the coastal zone. This distribution patterns are well coincide with grain size distribution. However, the patterns of Mn, co and Pb do not follow such and overall distribution. The concentration of Pb, particularly, did not show any features in areal distribution, which may be result from different pathways to the sediments, compared to the other metals. the speculation data show that a considerable amount of Cd, Mn and Co are bounded in the carbonate fraction, accounting for 42.8%, 40.3% and 30.6%, respectively. Cu, Zn, Mn and Fe are largely associated to oxide fraction with proportions of 34.4%, 23.1%, 15.5% and 13.7%, respectively. However, the metals in residual fraction account for more than 50% of the total metal concentration, except for Mn. These observations emphasize that residual fraction in the dominant component controlling the elemental concentration.quartz and glauconite grains.Accordingly,these sediments are interpreted as an extension part of transgressive sand deposit that are widely distributed on the continental shalf floor of southern Yellow Sea.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.5
• /
• pp.541-552
• /
• 2018

As the use of wood pellets increases, there is an increasing interest in the safety of the wood pellets themselves to avoid physical and chemical damage to people and the environment. This study investigated the contents of nitrogen, sulfur, chlorine, arsenic, cadmium, chromium, copper, lead, mercury, nickel, zinc, and cesium in wood pellets distributed in Korea as a preliminary survey for establishing safety evaluation standards for wood pellets. Nitrogen, sulfur, chlorine, and heavy metal contents of wood pellets produced in Korea met the specification for the 1st grade of wood pellets determined by the National Institute of Forest Science and the specification for the commercial and residential wood pellets of A1 grade determined by the ISO and the evaluation standards for wood pellet safety determined by the Korean Forest Service. However, among imported wood pellets, some wood pellets contained nitrogen, sulfur, chlorine, and heavy metal exceeding the safety evaluation standards. Cesium radioactivity was not detected in domestic wood pellets. Cesium radioactivity was detected from wood pellets imported from Japan, but it was below the limits specified in the wood pellet safety evaluation standards. In conclusion, by establishing safety standards for wood pellets, we believe that safe wood pellets will be used.