• Applied Chemistry for Engineering
• /
• v.9 no.7
• /
• pp.956-960
• /
• 1998

Cu-Zn and Cu-Zn-Ti catalysts for the steam reforming of methanol were prepared. This reaction was carried out at atmospheric pressure, $250^{\circ}C$, steam/methanol molar ratio 1.5, and contact time 0.1 g-cat.hr/mL-feed. In case of the catalyst with 3 mol% of $TiO_2$, the activity was superior to that of catalysts without $TiO_2$. The reaction products were mainly hydrogen and carbon dioxide. It was found that catalytic activity was not related to specific surface area but affected by metallic copper area which was measured by $N_2O$ decomposition and increased with the addition of $TiO_2$ content. XPS and XRD showed that the oxidation state of zinc was not changed during reaction, but oxidation states of copper existed in Cu(0) or Cu(I).

• Analytical Science and Technology
• /
• v.5 no.4
• /
• pp.417-423
• /
• 1992

The effects of metal ions on the arsenic(III) stripping peak were examined by the cathodic stripping voltammetry. The reduction stripping peak potential and current of arsenic(III) value were -0.79V(vs. Ag/AgCl). $0.86{\mu}A$ by using 0.1N-hydrochloric acid solution. When 10 times of Cu(II) was added to the solution, the reduction stripping peak potential of arsenic(III) was the value of -0.84V(vs. Ag/Cl), which showed a good agreement with theoretical value -0.84V(vs. Ag/Cl) by using 0.1N hydrochloric acid solution. Lead(II) and copper(II) increased the stripping peak heigh of arsenic(III), Among them, the copper(II) extremely enhanced it.

• Journal of the Korean Applied Science and Technology
• /
• v.32 no.3
• /
• pp.512-521
• /
• 2015

In this research, environmental friendly organic acid containing microetching system to improve adhesion strength between photoresist resin and Copper Clad Laminate(CCL) was developed without using strong oxidant $H_2O_2$. Etching rate and surface contamination on CCL were examined with various etching conditions with different etchants, organic acids and additives. to develope an optimum microetching condition. Etching solution with 0.04 M acetic acid showed the highest etching rate $0.4{\mu}m/min$. Etching solution with the higher concentration of APS showed the higher etching rate but surface contamination on CCL is very serious. In addition, stabilizer solution also played an important role to control the surface contamination. As a result of research, the etching solution containing 0.04 M of acetic acid, 0.1 M of APS with 4 g/L of stabilizer solution(ST-1) was best to improve adhesion between CCL and photoresist resin as well as showed the most clean and rough surface with the etching rate of $0.37{\mu}m/min$.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.10
• /
• pp.4658-4664
• /
• 2013

This paper presents the effects of the tube materials on the heat transfer performance of double-tube heat exchangers for the development of heat exchangers using deep sea water. Heat exchangers made of titanium, aluminum. stainless steel, iron, copper, and aluminum with carbon black 0.015mm and 0.15mm coating were tested. Also, the heat transfer rate of each heat exchanger was calculated by using EES program. The calculated values were compared with the experimental ones, and the deviations were less than 10%. From the above experiment and analysis, aluminum with carbon black 15 coating can be considered the most promising candidate for the replacement of titanium heat exchanger.

• Polymer(Korea)
• /
• v.24 no.2
• /
• pp.252-258
• /
• 2000

Various crosslinked poly(4-vinylpyridines) (CHP4VP) having different degrees of crosslinking were synthesized by radical copolymerization of 4-vinylpyridine with if N,N' -1, 6-hexamethylenebisacrylamide, and CHP4VP- Cu(II) complexes were prepared by the method of adsorption equilibrium. The catalytic activity of the complexes for the oxidation of ascorbic acid (AA) was investigated. The oxidation of AA by these complexes showed a kinetic behavior of the Michaelis-Menten type. The catalytic activity of CHP4VP-Cu(I ) catalytic system was increased with increasing the degree of crosslinking of CHP4VP, and its activity was scarcely decreased even after repeated use. However, the tendency of the catalytic activity of CHP4VP-Cu(II) complexes was decreased for the oxidation of AA when compared with that of the previously reported catalytic system containing crosslinked poly(4-vinylpyridine) prepared using N,N'-methylenebisacrylamide as a crosslinker. These results indicate that the degree of crosslinking of CHP4VP and the hydrophobicity of the crosslinker play an important role in the catalytic system of the oxidation of AA.

• Korean Journal of Environment and Ecology
• /
• v.18 no.3
• /
• pp.340-345
• /
• 2004

The embryotoxic effects of PCB (Aroclor 1248) on a Korean frog, Rana dybowskii was deter-mined by using the FETAX (Frog Embryo Teratogenesis Assay-Xenopus) protocol. The rates of mortality and malformed larvae were investigated by probit analysis. The results showed that PCB is highly embryolethal. From LC$_{50}$ of 1.48ppb and from EC$_{50}$ of 0.25ppb and TI of 5.7 were derived, which indicates PCB is to be considered a teratogenic compound. Specific malformations occurred in 62.0% as edema at the 0.1ppb, in 32.0% as tail deformations at the 1ppb, and in 68.0% as profound deformations at the 5ppb of PCB concentration which living embryos were exposed to. PCB suppressed the growth of head-tail length at a relatively low concentration (1.0ppb), and therefore growth inhibition as assessed by embryo length can be used as a sensitive indicator to evaluate the toxicity of pollutants in the environment. In conclusion, PCB must be considered highly embryotoxic to Rana dybowskii.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.30-30
• /
• 2018

스마트 도금공장을 구축하기 위해서는 도금액 내부의 화학 물질 농도 변화를 측정할 수 있는 화학 센서 기술이 필수적으로 요구된다. 와트욕은 대표적인 고속 니켈 도금액 중 하나로 기본적으로 황산니켈, 염화니켈, 보릭산의 염과 함께 케리어(type-1 광택제), 광택제(type 2-광택제), 응력 제어제 등의 유기 첨가제로 구성되어 있다. 이러한 유기 첨가제는 전차된 니켈층의 두께 균일도, 조도, 미세 구조, 내부 응력 등 다양한 특성을 제어하며, 정밀한 농도 관리가 필수적으로 요구되나, 분석 기술의 부재로 인하여 지금까지도 대부분의 액관리는 할셀법이나 작업자의 경험에 의존하고 있다. Cyclic voltammetry stripping(CVS) 방법은 전기화학 분석 과정에서 나타나는 첨가제의 가속, 감속 특성 등과 여기에 수반되는 stripping peak의 변화를 이용하여 개별 첨가제의 농도를 측정하는 방법이며, 지금까지 인쇄회로기판의 비아필 공정, 전해 동박 제조, 반도체 배선 등 구리도금 산업 전반에 걸쳐 첨가제 관리에 효과적으로 적용되고 있다. 그러나 수소 발생으로 인한 stripping 효율 문제로 인하여 니켈, 주석, 아연 등 표준 환원 전위가 높은 금속 도금액 내부 첨가제 농도 측정은 아직 어려운 상황이다. 본 연구에서는 이 문제를 극복하기 위해 염소를 과량 첨가한 구리 도금액을 CVS 분석의 base 용액으로 이용하여 니켈 도금액 내부 여러 광택제 (polyetylene glycol(PEG) 계열, thiourea 계열, 2-butyne-1,4-diol 등) 농도를 측정하는 법을 제시하였다. 제시된 방법은 CVS 분석 과정에서 구리-염소 사이의 상호 작용으로 인해 생성되는 3가지 stripping peak의 상대적인 크기 변화가 첨가제 농도에 따라 영향을 받는다는 사실에 기반하였다. 본 연구에서는 여기에 관한 원인에 대해 고찰하였으며, 제시된 방법을 통해 광택제 계열 첨가제 농도 측정을 선택적으로 할 수 있다는 것을 증명하였다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.12 no.2
• /
• pp.15-20
• /
• 1998

The furfural, generated by decomposition of insulating paper, the amount of metal in insulating oil, and tano(electrical properties of insulating oil)have been studied for the insulating oil in pole transformer with accelarated thermal aging test. It has been found that tan $\delta$ is affected by adding components of the transformer. The examination of amount of metal, which exhibits catalytic behavior to oxidation of insulating oil, suggested that the amounts of copper increase with degradation time. A comparison between tano and copper amount suggested that the amounts of copper for attention are above 0.2[pp]). Finally, the examination of amount of furfural revealed that the amounts of furfural increase with degradation time. As a consequence, these results could be used for diagnosis of pole transformer.former.

• KSBB Journal
• /
• v.17 no.1
• /
• pp.38-43
• /
• 2002

Characteristics of cell growth and heavymetal adsorption by recombinant Saccharomyus cerevisiae strains harboring multiple copies of the CUP1 gene encoding metallothione (MT) protein were studied in batch cultures. Recombinant S. cerevisiae strains harboring multiple copies of the CUP1 gene were superior to the host and wild-type yeast strains in terms of cell growth and heavy metal removal, indicating that the copy number of the CUP1 gene for MT expression played an important role in the adsorption of heavy metals. It was suggested that the CUP1 promoter for the MT expression is induced by manganese and zinc as well as copper An optimum copper concentration for MT expression and concomitant adsorption of heavy metals by recombinant S. cerevisiae was found to be 0.31 mM. A nonionic surfactant Triton X-100 enhanced cell growth by 17.7% and removal of zinc by 6.1% compared with the control case.

• Korean Journal of Environment and Ecology
• /
• v.7 no.2
• /
• pp.207-212
• /
• 1994

The census of Amphibia fauna in Tokyusan National Park was carried out during April 10, 1993 and August 8 - August 9, 1993 at the areas of construction field of golf course in Muju Resort and the Chibong. There were 6 species of 5 genera on the 4 families, 2 orders of Amphibia in Tokyusan National Park including Hynobius leechii. Onychodactylus fischeri, and Bufo bufo gargarizans which were announced the specific wild animals with the object of conserving by The Ministry of Environment. At the area of construction field of golf course in Muju Resort, there were 5 species of Amphibia observed as Hynobius leechii, Bombina orientalis, Bufo bufo gargarizans, Rana nigromaculata, and Rana dybowskii. Onychodactylus fischeri and Rana dyhowskii were observed at the Chibong area. The Chibong inwhich was observed 9 relatively large number of individuals of Onychodactylus fischeri was revealed as an environmentally sound habitat to Onychodactylus fischeri. Whereas in the construction field of golf course, there were intended to diminishing species and population size rapidly by progress with construction works. Therefore the large construction works such as golf couse and ski slopes which were concerning to deteriorate the natural environment should be restrain in National Park for animal diversity conservative.