Kim, Young-Soon;Shin, Jiho;Kim, Hyung-Il;Cho, Joong-Hee;Seo, Hyung-Ki;Kim, Gil-Sung;Shin, Hyung-Shik
Korean Chemical Engineering Research
/
v.43
no.4
/
pp.495-502
/
2005
Copper was plated on the tungsten substrate by use of a direct copper electroless plating. The optimum deposition conditions were found to be with a concentration of $CuSO_4$ 7.615 g/L, EDTA of 10.258 g/L, and glyoxylic acid of 7 g/L, respectively. The solution temperature was maintained at $60^{\circ}C$. The pH was varied from 11.0 to 12.8. After the deposition, the properties of the copper film were investigated with X-ray diffractometer (XRD), Field emission secondary electron microscope (FESEM), Atomic force microscope (AFM), X-ray photoelectron spectroscope (XPS), and Rutherford backscattering spectroscope (RBS). The best deposition condition was founded to be the solution pH of 11.8. In the case of 10 min deposition at the pH of 11.8, the grain shape was spherical, Cu phase was pure without impurity peak ($Cu_2O$ peak), and the surface root mean square roughness was about 11 nm. The thickness of the film turned out to be 140 nm after deposition for 12 min and the deposition rate was found to be about 12 nm/min. Increase in pH induced a formation of $Cu_2O$ phase with a long rectangular grain shape. The pH control seems to play an important role for the orientation of Cu in electroless deposition. The deposited copper concentration was 99 atomic percent according to RBS. The resulting Cu/W film yielded a good adhesive strength, because Cu/W alloy forms during electroless deposition.
Proceedings of the Korean Institute of Surface Engineering Conference
/
2014.11a
/
pp.127-128
/
2014
현재 기술 산업에서 PET위 무전해 도금을 실행하기 위해 다양한 전처리 공정과 Catalyst가 소개되고 있다. 그 중에서 가장 일반적으로 사용되고 있는 Catalyst는 Palladium으로서 Tin과 산화 환원 반응으로 Electroless Copper Deposition 단계에서 구리 도금의 Target으로 작용하고 있다. 하지만 상대적으로 Palladium은 생산 비용이 높으며 Tin은 쉽게 산화되는 문제점이 남아 있다. 이를 대체하기 위한 대안 공정으로서 Palladium 대신 Silver를 이용하여 Catalyst로서의 역할을 하는 공정이다. 이전에 PET위 전처리 공정으로 Ultra Violet을 사용하여 표면을 개질 시키는 방법을 연구했으며, 그 후 Potassium Permanganate와 Silver Catalyst의 Mechanism을 연구 했다. PET 표면 개질을 거치면서 화학 구조가 바뀌어 표면에 Carbon Carbon Double Bond를 형성한다. 이때 Permanganate ion이 새로이 형성된 이중 결합과 반응하여 두 개의 extra-OH functional group을 생성함과 동시에 $MnO_2$를 만들어 표면에 흡착 시킨다. $MnO_2$는 전위차에 의해 Silver Ion과 Redox Reaction을 일으키며 실질적인 Catalyst 역할을 하게 된다. Silver Catalyst는 무전해 구리 도금 용액 안에서 Copper의 Target으로 작용한다.
An attempt to recover copper from electroless plating wastewater has been made through evaporation followed by the electrowinning method. From the determination of each element in electroless plating wastewater, the content of Cu was found to be 582 mg/l and small amount of Fe was also contained in it. Moreover, the content of COD and TOC which was resulted from the addition of Rochell salt was found to be 9,560 and 13,100 mg/l, respectively. The content of formic acid generated by the oxidation of formaldehyde was determined to be 7.73 %. As a result, current efficiency was decreased with increase in current density and therefore current density less than $40mA/cm^2$ should be maintained to obtain current efficiency more than 80 %. The content of Fe in Cu obtained by electrowinning was found to be 0.021 and 0.01 % at the concentration of sulfuric acid of 2 and 10 vol%, respectively.
Proceedings of the Korean Institute of Surface Engineering Conference
/
2013.05a
/
pp.186-186
/
2013
반도체 배선용 무전해 구리 도금에서 pH조정제가 구리피막과 Ta 확산방지막 사이의 접합력에 미치는 영향에 대하여 연구하였다. TMAH로 pH가 조절된 경우 NaOH 사용시에 비하여 높은 접합력을 나타내었다. 면간거리 및 밀도 측정결과 TMAH를 사용한 경우 구리피막이 보다 치밀한 구조임을 확인할 수 있었다. TMAH 사용시의 높은 접합력은 NaOH을 사용 한 경우에 비하여 무전해 구리피막이 보다 낮은 내부응력을 갖기 때문으로 판단되었다. pH조정제에 따른 내부응력의 변화를 결정구조의 관점에서 자세히 고찰하였다.
Proceedings of the Korean Institute of Surface Engineering Conference
/
2013.05a
/
pp.200-200
/
2013
본 연구에서는 폴리이미드 기판 위에 무전해 및 전해 구리도금을 수행한 후 전류인가 조건에 따른 접합력의 변화에 대하여 고찰하였다. 이를 위하여 인가 전류량 및 시간을 변화시키면서 접합력의 변화를 조사하였으며, 이에 대한 해석을 위하여 표면 거칠기, 표면조직 등을 관찰하였다.
The Cu thin film material and process, which have been already used for metallization of CMOS(Complementary Metal Oxide Semiconductor), has been highlighted as the Cu metallization is introduced to the metallization process for giga - level memory devices. The recent progresses in the development of key elements in electrochemical processes like surface pretreatment or electrolyte composition are summarized in the paper, because the semiconductor metallization by electrochemical processes such as electrodeposition and electroless deposition controls the thickness of Cu film in a few nm scales. The technologies in electrodeposition and electroless deposition are described in the viewpoint of process compatibility between copper electrodeposition and damascene process, because a Cu metal line is fabricated from the Cu thin film. Silver metallization, which may be expected to be the next generation metallization material due to its lowest resistivity, is also introduced with its electrochemical fabrication methods.
Proceedings of the Korean Institute of Surface Engineering Conference
/
2014.11a
/
pp.135-135
/
2014
폴리이미드 필름 위에 습식도금으로 형성된 구리피막에서 시효처리 시간에 따른 박리강도의 변화를 실험적으로 확인하였다. 그 결과, 시효처리 4시간까지 큰 변화가 없다가 4시간부터 10시간 사이에서 급격히 증가하는 경향을 나타내었다. 시효처리 시간에 따른 박리강도 증가의 원인을 구리-폴리이미드 사이 계면 및 구리도금 피막 자체의 특성 변화의 관점에서 해석하였다.
Proceedings of the Korean Institute of Surface Engineering Conference
/
2015.11a
/
pp.176-177
/
2015
본 실험에서 PET 위 무전해 구리 도금을 위한 전처리 방법 중 하나인 UV 조사를 통해 전처리를 한 후 PET 표면의 특성과 염기성 무전해 도금액이 개질된 표면에 미치는 영향에 관한 연구를 하였다. 일반적으로 PET 표면을 개질시키기 위해 UVC(254nm) 파장을 이용하여 PET bond break (Chain Scission)을 이루는 것으로 알려진다. 이때 공기 중의 산소와 UV 조사를 통해 생성된 PET 내의 free radical과 산화 반응을 통해 친수성이 높은 표면을 형성하게 된다. PET 표면의 친수성을 측정하기 위해 접촉각 측정기가 사용되었으며, 표면의 거칠기 및 형상을 관찰하기 위해 AFM과 FE-SEM를 각각 이용하였다. 또한 PET 표면의 구조 변화는 XPS를 통해 분석을 진행 하였다. UV 조사 후 표면의 거칠기 및 친수성은 높아졌지만, 무전해 도금은 이루어지지 않았다. 분석 결과, 이는 표면에 형성된 Low Molecular Weight Oxidation Compound(LMWOC)가 염기성 수용액 내에서 용해되어 모두 씻겨 나가 표면에 형성된 Sn/Pd을 모두 떨어트린 것으로 판단되며, 위와같은 이유로 UV 조사 후 습식 공정에 적용하기 위해 표면개질 된 PET를 염기성 수용액을 통해 전처리가 필요한 것으로 사료된다.
In this study, a new UBM materials system for solder flip chip interconnection of Cu pads were investigated using electroless copper (E-Cu) and electroless nickel (E-Ni) plating method. The interfacial reaction between several UBM structures and Sn-36Pb-2Ag solder and its effect on solder bump joint mechanical reliability were investigated to optimife the UBM materials design for solder bump on Cu pads. Fer the E-Cu UBM, continuous coarse scallop-like $Cu_{6}$$Sn_{5}$ , intermetallic compound (IMC) was formed at the solder/E-Cu interface, and bump fracture occurred this interface under relative small load. In contrast, Fer the E-Ni/E-Cu UBM, it was observed that E-Ni effectively limited the growth of IMC at the interface, and the Polygonal $Ni_3$$Sn_4$ IMC was formed because of crystallographic mismatch between monoclinic $Ni_3$$Sn_4$ and amorphous E-Ni phase. Consequently, relatively higher bump adhesion strength was observed at E-Ni/E-Cu UBM than E-Cu UBM. As a result, it was fecund that E-Ni/E-Cu UBM material system was a better choice for solder flip chip interconnection on CU PadS.
Proceedings of the Korean Institute of Surface Engineering Conference
/
2013.05a
/
pp.37-37
/
2013
무전해도금법 (electroless plating)은 Brenner와 Riddell이 1946년에 처음으로 환원제를 이용한 금속의 침적을 electroless plating이라고 명명한 뒤 전기를 이용하지 않고 금속막을 얻을 수 있는 방법으로 인지되어왔다. 초기에는 용액이 불안정하였으나 용액의 안정성을 향상시키면서 꾸준히 산업체에 쓰여왔다. 무전해도금의 응용이 처음에는 니켈에 국한되었으나 구리의 무전해도금이 PCB에 사용되면서 80년대부터 전자산업에서 많이 쓰이게 되었다. 최근에는 무전해도금을 이용한 전자산업뿐만 아니라 MEMS와 같이 전기도금을 위한 전기접촉이 어려우면서 정밀한 균일도를 요구하는 분야에도 많이 쓰이고 있다. 본 발표에서는 무전해도금법의 일반적인 원리와 이를 이용한 IT 산업에서의 응용에 대하여 알아본다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.