• Journal of the Korean GEO-environmental Society
• /
• v.6 no.4
• /
• pp.65-71
• /
• 2005

Recently, difficulties in soft ground improvement that caused by effectiveness of the ground improvement, the durability and environmentally friendliness of the injection material come to the fore. This paper studies the field applicability of the SCM in reinforcement and seepage cutoff of the back of an existing continuous wall. SCM uses double rod which imposes heavy pressure($10-100kgf/cm^2$) to disturbed, cut, discharge, and mix the ground. It is observed that a bulb is formed by using cement paste and environmentally friendly injection materials with minimal alkali leaching. Unconfined compression test and fish poison tests are performed. Test results indicate that the method results in higher durability, less leaching through use of the environmentally friendly injection material, and faster mobilization of the strength. In addition, field tests confirm the formation of the bulb and the seepage cutoff wall.

• The Journal of Engineering Geology
• /
• v.29 no.3
• /
• pp.201-209
• /
• 2019

Bottom-up multi-stage pressure grouting is widely applied to domestic slopes and tunnels. It involves injecting earth from the ground to the surface after drilling. Various reports of construction performance have demonstrated its wide applicability. However, little research has studied top-down multi-step pressure grouting in Korea, which involves injection from the surface. This paper compares the grouting effect of both the established bottom-up method and the top-down method in soil box and field tests. The soil box test showed that the bulb volume of the top-down method is ~24% less than that of the bottom-up method. The field test confirmed that the top-down method has a wider grouting range and a higher injection density per area than the bottom-up method.

• Horticultural Science & Technology
• /
• v.33 no.6
• /
• pp.883-890
• /
• 2015

The soilborne fungus Fusarium oxysporum f. sp. lilii (Fol) is a serious threat to all lily cultivars, especially infecting bulbs and flowers. It has become increasingly important to develop varieties resistant against the bulb rot disease. Genetic diversity of cultivars and reliable screening methods are required for this purpose. Here, an efficient in vitro screening system for evaluating resistance to Fol in 38 in vitro-grown lily plants was investigated. Various factors including culture conditions of Fol, inoculum density, appropriate plant materials, inoculation method and duration, and incubation period of plant materials after inoculation were combined to optimize the screening method. As a result, we suggest optimal conditions for an in vitro screening system for the selection of Fol-resistant lily cultivars as follows. Fol was grown on potato dextrose agar (PDA) medium for 6 days at $25^{\circ}C$ in darkness and used as working inoculation. Spore suspensions were prepared (inoculum density: $1.0{\times}10^4$ $spores{\cdot}mL^{-1}$), and then leaf segments $1.5{\times}2.0cm^2$ were inoculated by dipping for 22 hours at $25^{\circ}C$ in dark. Later, leaves were cultured on 0.6% agar plates at $25^{\circ}C$ and 50% humidity with a photoperiod of 16 hours light/8 hours dark (fluence rate of $40{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$) to examine the progress of bulb rot. After 7 days, disease levels were classified into indices 1 (no symptom) to 6 (serious bulb rot). Soil inoculation of Fol carried out with resistant or susceptible lily cultivars that had been selected through in vitro screening confirmed the reproducibility of results. Therefore, the in vitro screening method established in this study is efficient and reliable for selection of lily cultivars resistant against bulb rot disease.

• Korean journal of food and cookery science
• /
• v.19 no.2
• /
• pp.223-230
• /
• 2003

This study was conducted to estimate the contents of 6 trace metals in potatoes and root vegetables purchased in wholesale market in the Seoul region, specifically, Cu. As, Zn, Pb, Cd and Hg. The minimum and maximum results obtained for each metal are summarized as follows for potatoes; Cu : 0.094∼0.344, As : N.D∼0.070, Zn : 0.247∼1.547, Pb : N.D∼0.268, Cd : N.D∼0.005, Hg : 0.001∼0.027, and for root vegetables; Cu : 0.021∼0.510, As : 0.004∼0.045, Zn : 0.143∼3.137, Pb : N.D∼0.372, Cd : N.D∼0.009, Hg : 0.001∼0.195. The daily intakes of trace metals from potatoes and root vegetables were estimated on the basis of the daily intake of these foods by Koreans, which were 0.073∼22.253 and 0.567∼156.219$\mu\textrm{g}$ from potatoes and root vegetables, respectively. The weekly intakes of trace metals were 0.009∼2.596 and 0.066∼18.224$\mu\textrm{g}$ for potatoes and root vegetables, respectively. The weekly intakes of trace metals for potatoes and root vegetables were very much lower than the PTWI(provisional tolerable weekly intake), enough to be within a safe range.

• FLOWER RESEARCH JOURNAL
• /
• v.16 no.1
• /
• pp.36-43
• /
• 2008

This purpose of this study was to examine the effect of planting density, growing medium and strength of a nutrient solution (National Horticultural Research Institute's nutrient solution: HRI's) on the growth and development of Oriental hybrid lily 'Le Reve' in a box cultivation. The planting density with 14, 18 and 22 bulbs had sprouting one day earlier than other treatments. Planting density of 22 bulbs flowered first, while six bulbs flowered the last, indicating that higher planting densities led earlier flowering. The increasing planting density increased stem length of cut flowers. On the other hand, cut flower quality was improved when the planting density was lower. The incidence of physiological disorders such as blasting was more frequent in planting density of 22, 18, and 14, indicating that higher planting densities caused higher incidences of physiological disorders. All planting densities except 22 bulbs displayed superior results in width, weight, number, and scale weight of the bulbs. Greater planting densities led to inferior bulb enlargement and an increased decomposition rate. pH decreased in all treatments after the bulb enlargement and decreased more as the planting density increased. Contents of P, K, Ca, and Mg increased, while contents of K and Ca decreased, as the planting density increased. The rice hull+coir (1:1, v/v) treatment was better than others, but did not show that much of a difference. Moreover, in bulbs enlargement after cut flower harvest, lily medium and perlite+peat moss treatments showed superior results, and decomposition rate was the greatest in the rice hull+coir (1:1, v/v) treatment. In the HRI's solution strength treatment from the period of flower bud emergence to flower harvest, higher solution strengths gave better cut flower quality in terns of length, weight, and number of flowers. The non-treated control and one third strength of a HRI's solution hastened flowering, indicating that lower strengths led to earlier flowering. According to the results of leaf analysis as affected by solution strength during the flower harvest, absorption rates of N and K were greater when the strength was higher, and Ca and Mg showed the same tendency. On the other hand, the absorption rate of P was the lowest in all treatments.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2007.11a
• /
• pp.374-377
• /
• 2007

본 논문은 Takagi-Sugeno (T-S) 퍼지 모델을 이용하여 이산 시간에서의 비선형 상호 결합 시스템에 대한 분산 동적 출력 궤한 제어기를 제시한다. 이산시간 비선형 상호 결합 시스템의 각 하위 시스템에 대한 T-S 퍼지 모델링을 한 후, 각각에 대해 동적 출력 궤한 제어기를 설계한다. 제어가 된 폐루프 하위 시스템들로 전체 시스템의 평형점이 안정화되는 선형 행렬 부등식 (LMI)을 구하고, 부등식을 이용하여 동적 출력 궤한 제어기의 이득값을 구한다. 마지막으로 모의실험을 통해 분산 동적 출력 궤한 제어기의 효용성을 확인한다.

• Proceedings of the KIEE Conference
• /
• 2008.04a
• /
• pp.117-118
• /
• 2008

제철소에서 생산된 Slab에는 서로를 구분하기 위해 관리번호가 기재되어 있다. 호스트 컴퓨터에서 보내 온 Slab 관기번호와 제품에 마킹되어 있는 Slab 관리번호의 일치 여부를 확인하기 위하여 자동 인식 시스템이 설치되어 있다. 자동 인식 시스템은 실시간으로 Slab가 없을 때의 영상과 Slab가 있을 때의 영상을 촬영하고 이를 이용하여 Slab 관리 번호를 인식하는 방법으로 구성되어 있다. 제철소 배경 영상이 복잡하고 조명이 계속 바뀌기 때문에 Text Region을 찾는 방법은 Slab 관리 번호를 인식하는데 가장 큰 문제점이다. 본 논문에서는 복잡한 배경을 실시간으로 Training하여 Text Region을 찾기 위한 전처리 과정을 나타내었다. 복잡한 배경 영상을 이용하여 Slab가 위치한 Region을 찾을 수 있고 실시간으로 Training하기 때문에 조명의 영향을 줄일 수 있다.

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.221-222
• /
• 2016

본 논문에서는 급변하는 특징을 갖는 부하를 제어하기 위한 병렬부하 공진컨버터의 공진 네트워크를 설계한다. RPG(Remote Plasma Generator)는 플라스마를 생성하기 위한 장치로써 플라스마 발생 전, 후의 부하 조건이 급격하게 달라지는 특징을 갖는다. 이때 플라스마를 발생시키기 위해서는 고전압이 필요하며, 플라스마를 유지하기 위해서는 높은 스위칭 주파수와 일정 크기의 정현파 전류가 필요하다. 이러한 특성을 고려하여 공진 네트워크를 설계하고, 시뮬레이션을 통해 과정의 타당성을 입증한다.

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.177-178
• /
• 2016

본 논문에서는 원격 플라스마 발생 장치용 리액터를 포함한 플라스마 부하의 등가 모델을 제안한다. 모델링을 위해 챔버 안에 존재하는 플라스마 부하의 특성을 고려하여, 플라스마 발생장치용 리액터를 포함한 전압, 전류의 정보를 통해 등가모델의 파라미터를 추출한다. 추출한 파라미터를 기반으로 플라스마 부하에 대한 전기적 등가회로를 구성하고, 플라스마 부하의 변화에 중요한 영향을 주는 플라스마 기체의 압력 정보를 등가 모델에 반영하여 이를 바탕으로 시뮬레이션을 진행해 모델링의 타당성을 검증한다.

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.147-148
• /
• 2016

본 논문에서는 원격 플라즈마 발생장치 (Remote Plasma Generator, RPG)에 적용하기 위한 공진형 토폴로지에 대해 비교한다. 원격 플라즈마 발생장치는 AC-DC 정류기, DC-AC 인버터, 공진탱크, 플라즈마 발생용 리액터, 점화장치로 구성되며, 이는 기존의 SMPS와 유사한 구성이다. 하지만 플라즈마 부하는 기존의 전력전자 어플리케이션들과는 달리 점화조건과 플라즈마 유지 조건을 충족시켜야 한다는 특징이 있다. 따라서 본 논문에서는 각 공진형 토폴로지들의 특성 비교 분석을 통해 원격 플라즈마 발생장치에 대한 적용 가능성에 대한 분석을 수행하였으며, 시뮬레이션을 통해 검증하였다.