• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.1
• /
• pp.139-144
• /
• 2009

Laron syndrome was first described by Dr. Laron. Administration of exogenous growth hormone failed to stimulate insulin-like growth factor-I(IGF-I) production which was related to postnatal growth, because these patients lacked receptors in the liver for this hormone. The diagnosis of this syndrome is based on the typical features of GH resistance such as normal or elevated serum GH, low serum IGF-I, and impaired IGF-I response to hGH. Laron syndrome patients showed characteristically severe postnatal growth failure and markedly reduced adult height. This report describes the oral and maxillofacial manifestations of children associated with Laron syndrome. Children with Laron syndrome have several dental and skeletal irregularities. Relatively little is known of the direct effect of Laron syndrome on dental development. Further research should be needed.

• The Journal of the Korean bone and joint tumor society
• /
• v.14 no.2
• /
• pp.131-139
• /
• 2008

Purpose: Lipomatous tumor occurred in hand is very rare. There is a broad spectrum of lipomatous tumors including lipomas, variants of lipomas, lipomatosis, liposarcomas and so on. We report the clinical features of 11 cases of lipomatous tumor which occurred in hand. Materials and Methods: Between 1992 and 2008, 11 cases were histologically diagnosed as lipomatous tumor in hand. We reviewed all medical records and clinical photographs retrospectively and ascertained recurrence by telephone interview. Results: Eight cases were ordinary lipomas. Three cases were angiolipoma, fibrolipoma and atypical lipoma respectively. Four cases occurred in finger, two cases in thenar area, two cases in hypothenar area, one case in palm, two cases in wrist. All cases were situated on volar surface. All patients complained of palpable masses. One patient with subungal angiolipoma felt pain. There was no neurologic sign or vascular symptom preoperatively. In one case, postoperative complication (hypoesthesia in $5^{th}$ finger) was developed. There was no local recurrence. Conclusion: In our study, lipomatous tumors occurred in hand did not recur. Patients mainly complained of feeling of lump. Pain was uncommon symptom. Postoperative complication was rare if operation was performed carefully.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.8 no.2
• /
• pp.151-163
• /
• 2006

Although various methods for effective modeling of pre-reinforced zones have been suggested for numerical analysis of large section tunnels, tunnel designers refer to empirical cases and literature reviews rather than engineering methods because ones who use commercial programs are unfamiliar with a macro-scale approach in general. Therefore, this paper suggests a simple micro-scale approach combined with the macro-scale approach to determine equivalent design parameters for effective numerical modeling of pre-reinforced zones in tunnel. This new approach is to determine the equivalent stiffness of pre-reinforced zones with combination of ground, bulb, and steel in series or/and parallel. For verification, 3-D numerical results from the suggested approach are compared with those of a realistic model. The comparison suggests that two cases make best approximation to a realistic solution: One is related to the series-parallel stiffness system (hereafter SPSS) in which bulb and steel are coupled in parallel and then connected to the ground in series, and the other is the series stiffness system (hereafter SSS) in which only bulb and steel are coupled in series. The SPSS is recommended for stiffness calculation of pre-reinforced zones because the SSS is inconvenient and time-consuming. The SPSS provides slightly bigger vertical displacement at tunnel crown in weathered rock than other cases and give almost identical results to a realistic model for horizontal displacement at tunnel spring line and ground surface settlement. Displacement trends on weathered rock and weathered soil are similar. The SPSS which is suggested in this paper represents the behavior mechanism of pre-reinforced area effectively.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.22 no.4
• /
• pp.367-381
• /
• 2020

This paper presents the seal material mixing ratio of tunnel umbrella arch reinforcement method. Currently, there is no clear standard for the proper gelation time and curing time of the Seal material in Korea, and the quality control is also difficult because it cannot be verified. In response, the ratio of the mixture of the seal material was composed of four types of indoor experiments, and the amount of gelation time and bleed was checked. In addition, a non-cart penetration test confirmed the curing time and compared the ratio of each combination. Further experiments on W/C 120% identified the effect of mixing speed and time on the seal material. A total of three field experiments were conducted based on indoor experiments, and the size and strength of bulb formation were compared by checking the curing time of the specimen and main injection. Comparisons show that the lower W/C, the stronger the strength, the larger the size of the bulb, and the faster the hardening time appears. Based on the results of the gelation time and curing time, it was deemed that the mixing ratio of W/C 120% is most appropriate when applied to the actual site.

• Horticultural Science & Technology
• /
• v.33 no.4
• /
• pp.618-623
• /
• 2015

The new white calla lily (Zantedeschia aethiopica) cultivar 'White Cutie' was bred at the National Institute of Horticultural & Herbal Science (NIHHS) in 2011. 'Childsiana' showing the multi-flowering characteristic and 'Wedding March' resistant to soft rot disease were artificially crossed in 2004. Of the progeny, 'White Cutie' was selected specifically for use in cut flower production after investigation over seven years (2005 to 2011) of genetic and phenotypic characteristics, resistance against soft rot, and customer preference regarding the culture vigor and post-harvest quality. 'White Cutie' was early flowering (85.6 days to flowering) with white flowers (RHS W155C), although it had a mid-sized flower in which spathe height and width were 8.6 cm and 8.7 cm, respectively. It was multi-flowering (6.2 flowers per plant) and produced a very high number of cormels (13.4 per plant). Furthermore, it was resistant to soft rot disease.

• Horticultural Science & Technology
• /
• v.32 no.6
• /
• pp.794-802
• /
• 2014

The aim of this study was to determine the effect of day-length extension treatment using LED lighting (blue, green, red, or 3 mixed) on vegetative growth and flowering of freesia 'Yvonne', in comparison to that using glow lamps and metal halide lamps. Lighting treatments were imposed from 5 PM to 8 PM for 150 days from after flower bud differentiation to flowering end. For the period from leaf emergence to floral bud formation, no light source affected plant height but the number of leaves was decreased by the metal halide lamp. The highest SPAD value in the flower bud developing period occurred in the metal halide lamp treatment. The time of flowering was advanced by blue or green LED treatment compared to the no lighting control. The green LED lighting advanced flowering by 6 and 8 days compared to no lighting and metal halide lamp treatment, respectively. The blooming period tended to be shortened by the red LED treatment. As for the flower characteristics of 'Yvonne', floret length and width, and the weight of cut flowers were highest in the metal halide lamp treatment. Red LED decreased corm width and weight of 'Yvonne' while glow lamp decreased height and weight. Starch contents in corm were not influenced by the lighting source. Our results indicate that the green LED lighting advanced the time of flowering and the metal halide lamp was good for cut-flower quality.

• Horticultural Science & Technology
• /
• v.28 no.3
• /
• pp.519-521
• /
• 2010

An Asiatic lily cultivar 'Asian Flame' was bred in 2007 at National Institute of Horticultural and Herbal Science (NIHHS), Rural Development Administration (RDA) of Korea. The crossing was conducted between female parent A94-34 ('Montreux' ${\times}$ 'Anabelle') and male parent 'Fire' by stigmatic pollination at Suwon in 1996. First selection was done and tentatively named as A98-98 in 1998. After in vitro multiplication and bulb production of A98-98 line, growth and flowering characteristic tests has been conducted from 2005 to 2007. The evaluation of characteristics and preference were surveyed at a lily flower show of NIHHS in 2007 in Taean. The new cultivar 'Asian Flame' flowers in middle of June and grows to an average of 122.7 cm in height. Flowers bloom upward-facing, red (RHS 45B) petals. Year-round flowering is possible by storage of the bulb under $-1.5^{\circ}C$ conditions. For forcing culture, it is necessary to add calcium to the fertilizer or remove side scales of large bulb to prevent leaf scorch.

• FLOWER RESEARCH JOURNAL
• /
• v.17 no.1
• /
• pp.40-43
• /
• 2009

'Glory Pink' an interspecific lily cultivar was released in 2007 at National Horticultural Research Institute (NHRI), Rural Development Administration (RDA), Suwon, Korea. The cross and ovule culture was made between FA interspecific hybrid 'FA97-30' (L. formolongi 'Raizan' ${\times}$ Asiatic lily 'A61'), a red colored cultivar, and Asiatic lily 'Sanzio', light red colored cultivar in 2001. Multiplication and bulbing, and characteristic tests were conducted from 2005 to 2006. Flowering time is around the first of July and the plant height is 131.7 cm. Flowers are upward-facing and red-pink (RHS 63C), with size of 11.3 cm. Petal length and width is 9.1 cm and 4.1 cm, respectively. Leaves are 13.8 cm long, 1.4 cm wide. The throat is dark green, and the stigma is light yellow and pollen is light brown. The weight and size of bulb is 51.1 g and 13.2 cm, respectively. For long-term storage, bulbs can be stored under -1 to -2 for year-round forcing.

• FLOWER RESEARCH JOURNAL
• /
• v.18 no.4
• /
• pp.284-290
• /
• 2010

This study was carried out to breed a self-compatible variety of Tiger Lily from the seedlings originated from Chinju city, Gyeongsangnam-do. The morphological characteristics, ploidy, and the resistance of seedlings to virus infection were investigated. A progeny test was also conducted to examine whether the propagated progenies had the same characteristics as the mother plant. The self-compatible diploid lily variety developed in this study showed a tall type like native triploid lily, Lilium tigrinum, and bulbils were formed on both lily varieties. The morphological characteristics of the flowers and leaves were not much different between the varieties, while the size of the bulbils and bulbs showed significant differences. The percentage of seed generation by self-pollination was 72.6% for the self-compatible variety, while there was no seed generated for native triploid lily. The number of chromosome was 2n = 26 (x = 13, diploid) for the self-compatible variety, while 2n = 39 (x = 13, triploid) in native lily variety. The progenies of the self-compatible diploid lily variety showed the same characteristics as those of its mother plant in morphology, seed germination, and polyploidy. The mother plant of the self-compatible diploid lily variety showed 58% pollen germination and the 2-year-old and 3-year-old progenies showed similar germination percentages. The pollen grains of Korean native triploid lily, however, never germinated.

• FLOWER RESEARCH JOURNAL
• /
• v.17 no.1
• /
• pp.36-39
• /
• 2009

An Asiatic lily cultivar 'Apricot King' was bred in 2007 at National Horticultural Research Institute (NHRI), Rural Development Administration (RDA), Suwon, Korea. The cross was made in 2002 between Asiatic lily 'Orlando', a light orange colored cultivar, and 'Corrida', yellow and pink colored cultivar. Preliminarily selection was done as 'A04-72' in 2004. Multiplication and bulb formation, and characteristic tests were conducted from 2005 to 2006. The evaluation of this line was performed and named as 'Wongyo C1-84' in 2007 that was registered as 'Apricot King' to the registration office of Korea Seed & Variety Service. 'Apricot King' flowers at the end of June and grows average 121.6 cm. It flowers upward-facing, dark green throat and yellow orange (RHS 20A) with the size of flower 17.9 cm. Mean petal length and width is 12.8 cm and 3.7 cm, respectively. Leaves are 16.1 cm long and 2.1 cm wide. It shows light orange stigma and pollen. The weight and size of bulb is 64.2 g and 17.6 cm, respectively. For long-term storage, bulbs can be stored under -1 to $-2^{\circ}C$ for year-round forcing.