• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제52권3호
• /
• pp.137-143
• /
• 2003

The degree of contamination on outdoor insulator is ons of the most importance factor to determine the pollution level of outdoor insulation, and the sea salt is known as the most dangerous pollutant. As shown through the preceding study, the generation of salt pollutant and the pollution degree of outdoor insulator have a close relation with meteorological conditions, such as wind velocity, wind direction, precipitation and so fourth. So, in this paper, we made an investigation on the prediction method, a statistical estimation technique for equivalent salt deposit density of outdoor insulator with multiple linear regression analysis. From the results of the analysis, we proved the superiority of the prediction method in which the variables had a very close(about 0.9) correlation coefficient. And the results could be applied to establish the Pollution Prediction System for power utilities, and the system could provide an invaluable information for the design and maintenance of outdoor insulation system.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.791-794
• /
• 2001

We described a method resonant mode identification in dielectric-disc loaded cylindrical cavity resonators. The characteristic equation is solved by using the ContourPlot graph of Mathematica. Contour graph method uses graphical method. It is comparable with numerical method. The numerical method is very difficult a mode identification. The analysis based on the approximated electromagnetic representation. This kinds of studies only concentrated on the calculation of resonant frequencies, and a mode identification of resonant frequencies have not been covered. But, the contour graph method to analyze the characteristic equations is simple and all parts of resonant frequency graph can be easily drawn, it is possible to calculate precise resonant frequencies and to identify the mode of resonant frequencies.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.507-510
• /
• 2001

본 논문은 일 라이트의 항균 방취 및 세균 흡착 능력을 공기조화기 및 공기청정기의 프리필터로 함침하여 사용함으로서 필터의 탈취 시험결과는 암모니아, 메틸멀캅탄, 트리메틸아민, 황화수소를 가지고 실험결과 거의 모든 가스를 흡착하였고 필터의 항균시험 결과 두가지의 균주를 사용하였는데 균주 1 - Staphylococcus aureus ATCC 6538과 균주 2 - Escherichia coli ATCC 25922는 균 감소율이 99.9% 이상을 보였다. 따라서 본 논문이 의도하였던 모든 특성을 만족한 결과가 도출되었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.1069-1072
• /
• 2001

We described a method resonant mode identification in dielectric-rod loaded cylindrical cavity resonators. Resonant frequency of dielectric loaded cavity is calculated by analyzing the characteristic equation. The characteristic equation is solved by using the ContourPlot graph of Mathematica. As the result of comparing calculation value and experimental value of resonant frequencies, we know that the field representation of non-decaying mode is exact. The contour graph method is not a method using approximated representation of electromagnetic field variation at the outer area of dielectric in the resonators but a method using exact representation.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.311-314
• /
• 2001

This paper describes the simulation study, conducted on the propagation characteristics of AE signal in the connection of GIS. In the high voltage and large power system, the equipment with SF$\sub$6/ gas insulation which consists of the component part enclosed in the compressed gas has less affected by the environment than with air insulation. When the breakdown in the electric installation occurs, it takes much time to repair them though. Therefore it is very important to diagnose the propagation characteristics of AE signal in the GIS. So, in this investigation, we make a plane model of 362 kV GIS and modal and harmonic analysis to observe the vibro-acoustic property. Through the result of the analysis, we can make a further understanding on the vibro-acoustic characteristics of AE singnal in the connection of GIS.

• 한국전기전자재료학회논문지
• /
• 제14권1호
• /
• pp.48-53
• /
• 2001

The crystal structure of ZnS fabricated by gas-liquid phase reaction was refined by the Rietveld program using X-ray diffraction data. The R-weighted pattern (R$\sub$wp/) of ZnS powder was 10.85%. The fraction of HCP phase was closely related with extra amount of H$_2$S gas. The lattice parameters and crystalline size were changed by the relative ratio of multi-phase. The luminescence property of ZnS:Cu, Al green phosphors prepared by conventional methods was good in the range of 91∼94% and 150∼190${\AA}$, respectively. According to the maximum entropy electron density(MEED) methods, any defects in (001) plane of cubic phase were not found. We suggest that both the Rietveld and maximum entropy density methods may be useful tools for studying luminescence mechanism of other phosphors materials.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.1075-1079
• /
• 2002

This paper presents a result of sound transmitting system with power line communication technique, Sound transmitting system is a transmitter which transmits modulated audio signal to power to power line and receiver which is capable of detesting it with earphone or speaker. It has been evaluated with the frequency characteristics and spectrum analysis. And, from the result of evaluation on the developed system, we confirm the superior sound transmitting characteristics, and the possibility of application on a language laboratory.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2007년도 춘계학술대회 논문집
• /
• pp.134-137
• /
• 2007

GB-SAR (Ground-Based Synthetic Aperture Radar) 시스템은 지상에서 안테나의 정밀한 일축 제어를 통해 합성 구경(synthetic aperture) 효과를 얻어 높은 해상도의 영상을 얻는 레이더 스캐너(Radar Scanner) 의 일종이다. GB-SAR는 장기간에 걸쳐 안정 적으로 마이크로파 영상 및 위상을 얻을 수 있기 때문에，SAR간섭기법(interferometry)을 통하여 비교적 안정된 산란체의 시간에 따른 변위를 cm 혹은 mm 정밀도로 정량적으로 얻을 수 있으며, 또한 긴밀도(coherence)를 통해 산란체의 안정성을 정성적으로 추출해 낼 수 있다. 이 논문에서는 GB-SAR 시스템의 개발을 소개하고 여러 가지 영상 획득 모드를 통하여 얻어진 SAR 영상， DInSAR, Cross-Track InSAR, ${\triangle}k-InSAR$, PSInSAR, 및 SAR Polarimetry 등 GB-SAR 시스템의 다양한 응용 가능성을 간략하게 보였다.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2001년도 춘계학술대회 논문집
• /
• pp.411-418
• /
• 2001

The initial analysis frequencies of the isolated test structure for seismic excitation tests give quite higher values to the actual modal test results. This large difference was redulted from some uncertainties in analysis modeling of several connection regions between column and upper beam, cross bars of the isolated structure. A modified simple analysis model is developed representing the actual dynamic behaviors of the test model, and the seismic analysis responses of the simple model are compared with those of the seismic tests.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1996년도 가을 학술발표회 논문집
• /
• pp.45-51
• /
• 1996

The combined shear and compression behaviors of seismic isolation rubber bearings are analyzed using the hyperelasticity material option of the ABAQUS computer program. The purpose of the analysis is to predict the behavior of laminated rubber bearing before the several tests. Some kinds of strain energy density functions are used as constitutive law for rubber itself having the hyperelasticity. The results are compared with test data peformed in Italy The analysis results show a little different with experimental results depending on the constitutive model and the refinement of finite element. The high order form of strain energy density functions results in good agreements and the mesh refinement above two for one rubber layer is enough to get good results.