• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2005.04a
• /
• pp.383-389
• /
• 2005

This research is to develop a seismic response analysis method for a spent fuel storage cask. FEM model is built for the test model of 1/8 scale spent fuel dry storage cask using available 3D contact conditions in ABAQUS/Explicit. Input load for this analysis os a seismic wave of El-centro earthquake, and the friction and damping coefficients in the analysis condition we obtained from the test result. Penalty and kinematic contact methods of ABAQUS are used for mechanical contact formulation. The analysis method was verified for rocking angle obtained by seismic response tests. The kinematic contact method with an adequate normal contact stiffness showed a good agreement with tests.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.197-200
• /
• 2005

This paper presents the design of a broadband hybrid mixer using dual-gate FET topology with a low-pass filter which improves return loss of output to isolate RF and LO signal. The low-pass filter shows the isolation whose RF and LO signal is better than 40 dBc at 2 GHz and 5 GHz band. The dual-gate mixer which has been designed by using cascade topology operates when the lower FET is biased in linear region and the upper FET is in saturation. The input matching circuit has been designed to have conversion gain from 2 GHz to 6 GHz. The designed mixer with low-pass filter shows the conversion gain of better than 7 dB from 2 GHz to 6 GHz at a low LO power level of 0 dBm with the fixed IF frequency of 21.4 MHz.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.383-386
• /
• 1999

이 논문은 한국어 파열연자음이 유성음 환경에서 유성음화하는 현상을 운율구조와 관련해서 음향음성학적으로 고찰하는 것을 목적으로 한다. 이 논문에서는 첫째, 음성적 자질로서나 청각적인 판단에 의해서나 무성음과 유성음의 이분법으로 나뉘는 것을 음향적 고찰을 통하여 각각을 하위의 범주로 나누었다. 문장 안에서 파열연자음이 음향적으로 실현될 때 각각의 범주가 어느 정도의 빈도수로 출현하는지를 살펴보았다. 둘째, 한국어 파열연자음은 어절 초에서는 무성음으로 실현되나 앞뒤에 유성음이 오는 경우에는 유성화되는 음운규칙이 있는데, 음향적인 분석을 통하여 앞뒤에 유성음이 온다는 조건만으로 설명할 수 없는 예들을 발견하였다. 그리하여 인접음절(특히 앞음절에 오는 분절음의 특성)과 운율구조(액센트구 내에서의 위치, 억양구경계의 유무)를 함께 고려하는 파열연자음 유성화규칙의 조건을 제안하였다.

• 한국생물공학회:학술대회논문집
• /
• 2001.11a
• /
• pp.471-474
• /
• 2001

To optimize the culture conditions for fungal pathogen YK101, the effects of culture medium, temperature and agitation on mycelium production were investigated. The optimum temperature and agitation for the cultivation of YK101 were $28^{\circ}C$ and 150rpm, respectively. The optimized medium was composed of 1.0- 2.0% total sugar from sucrose, 1.0% yeast extract and 0.05% $MgSO_4$ ${\cdot}$ $7H_2O$.

• Proceedings of the Optical Society of Korea Conference
• /
• 2002.07a
• /
• pp.24-25
• /
• 2002

밀레니움을 전후하여 세계적으로 8m급 초대형 망원경들이 만들어지고 있다. ESO (European Southern Observatory)의 VLT (Very Large Telescopes) 4기, 미국 영국 카나다 등의 연합 Gemini telescope 2기, 일본의 Subaru 1기 등, 10여기의 망원경들이 완성되었고, 차세대 망원경들이 50m급으로 디자인되고 있다. 우주망원경도 지름 2.4m인 허블 우주망원경(Nubble Space Telescope)의 뒤를 이어 6m급의 차세대 우주망원경 (Next Generation Space Telescope)이 개발되고 있어서 2010년경에 발사될 예정이다. (중략)

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.19 no.40
• /
• pp.53-68
• /
• 1996

This paper focuses on the method of setting priorities for telecommunications standardization work areas (SWAs) and standardization work items (SWIs), detailed sub-areas of each SWA. It is based on prioritization of SWAs to make a strategic plan that usually includes prioritization, resource allocation and standardization schedules for each SWA in telecommunications field. We applied the simple Delphi technique and the Analytic Hierarchy Process (AHP) to the prioritization process. We also introduce 0-1 integer programming for resource allocation using the AHP result. We present analyzed results according to the proposed process. The result of this study will be useful input for telecommunications standardization policy making and practical implementation.

• The KSFM Journal of Fluid Machinery
• /
• v.16 no.2
• /
• pp.35-41
• /
• 2013

Inlet part of a printed circuit heat exchanger has been optimized by using three-dimensional Reynolds-Averaged Navier-Stokes analysis and surrogate modeling techniques. Kriging model has been used as the surrogate model. The objective function for the optimization has been defined as a linear combination of uniformity of mass flow rate and the pressure loss with a weighting factor. For the optimization, the angle of the inlet plenum wall, radius of curvature of the inlet plenum wall, and width of the inlet pipes have been selected as design variables. Twenty six design points are obtained by Latin Hypercube Sampling in design space. Through the optimization, considerable improvement in the objective function has been obtained in comparison with the reference design of PCHE.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.7
• /
• pp.1225-1232
• /
• 2000

In this paper, a new coupled resonator which expands free spectral ranges (FSR) of the W. G. mode resonators is presented. The proposed coupled resonator consists of two dielectric disks. The resonance frequency of the coupled resonator is equivalent to the frequency, which satisfies the individual resonance conditions of each disk at the same time. As the results, the FSR is expanded. The coupled resonator proposed in this paper at K-Band is fabricated by using dielectric disks and the dielectric straight waveguides. The validity of proposed coupled resonator was verified through experiments.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2005.11a
• /
• pp.87-90
• /
• 2005

High-efficiency switched-mode circuits such as the class-E amplifier are well-known in the MHz frequency range. The class-E amplifier is a type of switching mode amplifier offering very high efficiency approaching 100%. In this paper of the class-E amplifier by using pHEMT device, the design has been done theoretically and experimentally, with simulation by using the harmonic balance method using circuit simulator. The amplifier using microstrip circuit and the pHEMT demonstrate 66% power-added- efficiency (PAE) at 2.4GHz with 17.6dBm of output power.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.11a
• /
• pp.75-76
• /
• 2012

In this study, it was evaluated about creep properties of high strength concrete according to compressive strength and moisture evaporation condition. As a results, creep strain and creep coefficient was greatly affected by moisture evaporation conditions rather than compressive strength. Also, the effect of fiber mixed was not show big difference.