• Textile Coloration and Finishing
• /
• v.23 no.4
• /
• pp.257-262
• /
• 2011

The dish cloth requires antimicrobial activity for hygienic purpose. Until now, organic antimicrobial agents of low cost have been frequently used for the anitimicrobial finishing. However, a cleaner hving anitimicroial activity should be more durable considering consumers' ever-increasing expectation. In this study, the cleaner containing the bamboo fiber were finished with a formulation of a new zirconium-containing inorganic agent of zirconium phosphate and polyurethane binders. The optimum treatment condition was investigated. And its durability against repeated laundering cycles was assessed. The existence of Zr after the repeated laundering was verified and the antimicrobial effect did not decrease under 30 washing cycles.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 2000.04a
• /
• pp.20-25
• /
• 2000

아세트아미노펜(파라세타몰)은 p-aminophenol 유도체로서 (그림 1) 두통, 치통, 신경통 등의 통증에 널리 사용되는 해열진통제인데 아스피린과 같은 정도의 해열 진통 효과를 나타내며, 이것은 중추신경계의 체온조절 중추에 작용하여 피부혈관을 확장함으로써 열의 확산을 증가시키는 해열작용과 시상 및 대뇌피질에의 통각역치를 높여 진통작용을 하는 것으로 추정 된다. 아세트아미노펜은 백색의 결정 또는 결성성 가루로 물에 조금 녹고 메탄올 또는 에탄올에 잘 녹으며 수산화나트륨 시액에 녹고 에텔에는 매우 녹기 어렵다 (표1). 대한약전에서는 정제가, 미국약전에는 캅셀제, 좌제, 경구현탁액제, 발포성 건조시럽, 정제 등이 수재되어 있고, 세계 각국에서 OTC 제품으로 1정당 160mg의 츄잉정까지 판매되고 있다. 그러나, 시판되고 있는 정제등은 붕해되어 용출되는데 오랜시간이 소요되어 대한약전에는 약 30분간에 80%이상의 용출기준이 설정되어 있으며, 독특한 쓴맛 때문에 microencapsulation 한 제피세립을 사용하고 있으나 역시 1 정당 300mg 이상의 확산정이나 속용정은 존재하지 않는다. 이것을 개선하기 위하여 붕해속도가 빠르고 특히 진통효과가 빠르며 물없이 구강내에서 간편히 녹여 복용하거나 또는 씹어서 또는 물과 함께 복용할 수 도 있는 $\ulcorner$알카펜$\lrcorner$ 속용정을 개발하게 되었다 (그림2).

• Journal of the korean veterinary medical association
• /
• v.28 no.8
• /
• pp.470-475
• /
• 1992

개업수의사로서 실천할 수 있는 예방의학 1. 효과적인 예방주사접종과 정확한 주사간격(예방주사접종일이 되면 축주에게 전화나 엽서로 시기가 되었음을 알려준다.) 2. 영양교육과 grooming 상담을 통한 건강상태 개선과 관계되는 처방약품 또는 양질의 용품판매 3. 비상/상비약품 필요성 인식과 판매, 건강유지를 위한 영양제의 계속적인 필요성 강조로 축주의 영양관리에 대한 인식개선 4. 1년에 2회, 분변검사를 통한 정기적인 기생충 r제와 일단 감염시 2회 치료와 효과확인 5. 구강검사를 통한 제질병의 발견과 치아검사의 필요성강조 및 치아건강 관련제품 사용권장 6. 각 품종별 특이한 질병의 설명과 예방을 한 검사(X-ray, 병리검사)의 추천과 결과에 따라 진행방지 방법이나 수술/치료 권유 7. 적극적인 진료자세-예)종양의 보다 세밀한 검사와 치료로 전이예방

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.3
• /
• pp.557-568
• /
• 2005

The aim of this study was to evaluate the resistance to degradation and to compare the wear resistance characteristics of four esthetic restorative materials in an alkaline solution(0.1N NaOH). The brands studied were MetafilCX(Sun medical, Japan) Solitaire 2(Heraeus Kulzer, USA), Composan LCM(Promedica, Germany), DenFil(Vericom, Korea). The results were as follows: 1. The mass loss of each brand was 0.74~7.94% and highest value in Metafil($7.94{\pm}0.39%$). 2. The sequence of the degree of degradation layer depth was in descending order by Metafil, Solitaire 2, DenFil, Composan LCM. There were significant differences between Metafil and the others(p<0.05). 3. The sequence of the Si loss was in descending order by Metafil, Solitaire 2, Composan LCM, DenFil. There were significant differences among the materials(p<0.05). 4. On SEM, destruction of bonding between matrix and filler and on CLSM, the depth of degradation layer of specimen surface was observed. 5. The sequence of maximum wear depth was in descending order by Metafil, Solitaire 2, Composan LCM and DenFil. There were significant differences among the materials(p<0.05). 6. The correlation coefficient between Si loss and degradation layer depth (r=0.491, p<0.05) and Vicker's hardness number and maximum wear depth (r=-0.942, p<0.05) were relatively high. These results indicate that hydrolytic degradation and wear may consider as a evaluation factors of composite resins.

• Journal of Digital Convergence
• /
• v.11 no.12
• /
• pp.515-522
• /
• 2013

The purpose of this study was to closely examine the inhibitive effect of erythritol on growth and acidogenic ability of Streptococcus mutans. As expected, the growth of S. mutans was comparably increased with the addition of sucrose. However, xylitol and erythritol remarkably reduced the growth of S. mutans. Growth inhibition was detected at more than 5% of erythritol although xylitol showed growth inhibition effect at all concentrations tested. Growth inhibition effect was monitored with the combination of same concentration of erythritol and other carbohydrates. Combination of 5% or 10% erythritol with xylitol showed effective growth inhibition. Addition of 2.5%, 5%, or 10% erythritol with sorbitol also showed growth inhibition. From these results, erythritol showed potency of growth inhibition of S. mutans, which is involved in dental caries, and was confirmed to be an excellent sugar substitute, which has effect on preventing caries.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.31 no.3
• /
• pp.221-230
• /
• 2015

Recently, traditional impression has been rapidly replaced by digital impression using intraoral scanning. There are more than 7 types of intraoral scanners available in the dental market. It is difficult to make effective strategic choices due to a lack of standards and guidelines for optimal intraoral scanning devices. So far, little has been reported about evaluating the ergonomic aspect of these scanners. This literature review compares current intraoral scanning systems based on different types of handles and suggests the most comfortable, user-friendly intraoral scanners from an ergonomic standpoint.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.6 no.5
• /
• pp.391-395
• /
• 2005

This paper has comparatively analyzed the characteristics of the machined surface of a specimen made by machining Die Steel STD11 and a specimen obtained by W-EDM steel. If a press die is manufactured through W-EDM, products of shapes that cannot easily be made through machining can be manufactured easily. However, the life of the press die is significantly reduced compared with the press die made through machining. This is believed to be caused by the deformed layer that has occurred on the surface of the press die that was made through W-EDM. The roughness of the 2 specimens was measured, and it was learned that the distribution of the roughness of the specimen made through the 1st W-EDM was rough. When the specimens were observed using a scanning-electron microscope, there was significant difference between the surface and the cross-section of the 2 specimens, while the cross section of the specimen obtained through W-EDM had the tempered and quenched surface structure which exists in the form of a deformed layer.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.2
• /
• pp.217-226
• /
• 2009

Allyl isothiocyanate (AIT), the principle ingredient of antimicrobial ingredients from horseradish root, can be prepared from extracts of horseradish root or synthetic method. It is reported that the horseradish root extract has the antimicrobial effect against various oral microorganisms, while there is no further study about the antimicrobial effect against the oral microorganisms of synthetic AIT derived from synthetic method. The aim of the study is to compare the difference of the antimicrobial effect between horseradish root extracts and synthetic AIT. To evaluate the antimicrobial effect, we measured the minimum inhibitory concentration(MIC) and minimum bactericidal concentration (MBC), and the results are like following. 1. The MIC of horseradish root extract against 7 kinds of oral pathogenic microorganisms is about 117$\sim$1,750 ppm(0.0117$\sim$0.175%), and the MIC of the synthetic AIT is about 344$\sim$3,000 ppm(0.0344$\sim$0.3%), which have the antimicrobial effects against all kinds of microorganisms. 2. The MBC of the horseradish root extracts against the 7 kinds of oral microorganisms is about 625.2$\sim$6,000 ppm(0.06252$\sim$0.6%), and the MBC of the synthetic AIT is about 1,750$\sim$7,000 ppm(0.175$\sim$0.7%), which have the antimicrobial effects against all kinds of microorganisms.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.1
• /
• pp.21-26
• /
• 2014

When iodine container for dental mouth treatment is opened, thread for treatment is cut by the blade in cap of container. Due to the problem of corrosion in a short period time after the reaction of metal blade to iodine solution, it gives impact on patient hygiene. In order to solve the problem, alternative products such as ceramic blade are developed and produced recently. In case of ceramic blade, it is produced by handwork and machine work. In this study, for the quantity production of ceramic blade with powder injection molding, we proposed a delivery system to have uniform charge of 20 cavity. Using Moldflow, simulation on 20 Cavity flow was performed. And then the mold was obtained through mold production and modification.(based on simulation) After injection molding, debinder, sintering process was achieved for ceramic blade, and the cap product was completed via insert injection on ceramic blade. In this study, we verified possibility of quantity production of ceramic blade which showed effective performance for cutting.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.28 no.1
• /
• pp.27-36
• /
• 2012

As the popularity of implant treatment using a variety of problems have been reported. The proper torque values recommended by the manufacturer and the actual tightening force applied to the observed differences. Period for each product used in this study using different torque controllers accuracy for each of the comparisons, were analyzed. Error rate varies by the manufacturer, but all the products used in the reference period for increasing the error rate increased. Repeat the initial tightening, but the reference, showed a value close to the reference value for the width of change was larger. However, increasing the number of repeated tightening of the reference value for the error rate increased, but has reduced the width of the observed changes.