• Journal of Oral Medicine and Pain
• /
• v.26 no.3
• /
• pp.301-308
• /
• 2001

지금까지 여러 가지 형태의 기기를 이용하여 보고된 사람의 교합력은 그 최대치가 매우 다양하다. 본 연구에서는, 교합력을 측정하기 위하여 새로운 측정기기를 개발하였다. 본 기기를 이용하여 전치부 교합력 측정 시에는 대칭적으로 최대한 물도록 하악을 유도하여 최대 교합력을 측정하였고, 구치부는 편측으로 물도록 하악을 유도하여 최대 교합력을 측정하였다. 교합 시 치아간 수직고경은 15.1mm 였다. 측정기기 내 strain gauge를 사용하여 전기저항의 변화를 힘으로 전환하였다. 마이크로 프로세서가 수치를 계산하면 액정화면에 수치가 표시된다. 실험실 내 기기교정 검사에서는 50kg과 100kg의 부하를 가하였다. 개발된 교합력 측정기기의 임상적 신뢰도를 시험하기 위해 건강한 치과대학 재학생 10명을 대상으로 최대 교합력을 측정 하였다. 이 새로운 측정기기로 측정된 교합력은 이전연구에서 기록되었던 것보다 더 높은 수치가 나왔다. 또한 제1대구치와 전치부에서 최대 교합력을 측정한 경우 실험자 내와 실험자 간에 통계적으로 유의한 신뢰성을 얻을 수 있었다. 본 기기는 안정적이고 조작성이 쉽다고 판명되었다. 그러므로, 본 기기는 더 큰 연구 집단의 선별검사에 매우 유용하게 사용할 수 있을 것이며, 또한 치주질환이 있는 치아나 임플란트, 악관절 장애를 가진 환자의 교합력 측정과 같이 특정된 경우의 교합력 측정에도 유용할 것이다.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.42 no.3
• /
• pp.233-241
• /
• 2015

The aim of this study was to determine the bite force and lip closing force in preschool children and to analyze the correlation between these forces by age, height and weight, respectively. Data were obtained from 98 children (56 males, 42 females) ranging from 3 to 6 years of age. The magnitude of the bite force was measured bilaterally corresponding with the 2nd primary molars using a bite force gauge, $GM10^{(R)}$ (Nagano Keiki) and the force of lip closure was measured using LIP DE $CUM^{(R)}$ (Cosmo Instruments). The averages of bite force for boys and girls were 217.69 N and 205.05 N, respectively. The relationship between bite force with age, height, and weight present significant positive correlation (p < 0.001, p < 0.001, and p < 0.001, respectively). The averages of lip closing force for boys and girls were 4.81 N and 4.07 N respectively. The relationship between lip closing force with age, height, and weight present significant positive correlation (p < 0.001, p < 0.001, and p < 0.001, respectively). No significant differences were observed between boys and girls (p > 0.05) in both forces. A significant correlation was observed between lip closing force and bite force (p = 0.002).

• Journal of Dental Rehabilitation and Applied Science
• /
• v.32 no.1
• /
• pp.1-7
• /
• 2016

Mastication is the process to help digestion by chewing or grinding food. Masticatory system consists of maxilla, mandible, temporomandibular joints, ligaments, dentitions, and musculatures. Assessing the bite force can be one of the methods to estimate the masticatory system. Bite force is influenced by facial morphology, age, sex, periodontal status, temporomandibular joint disorder and dental condition, and so forth. In general, higher maximum bite force is seen in those who have a square-shaped face and in male rather than female. In addition, bite force tends to be increased by age 20, maintained constantly until age 40 - 50, and then decreased. Periodontal disease is known as a causative factor for decreased bite force while temporomandibular disorder (TMD) remains controversial as to whether it affects the force. The status of teeth is considered as an important factor to determine the maximum bite force.

• The korean journal of orthodontics
• /
• v.25 no.4
• /
• pp.487-495
• /
• 1995

This study was undertaken to compare each maximum biting force and to investigate its relationship with the facial skeketal form, number and position of tooth contact between anterior openbite and normal occlusion adults, using the T-scan system and the lateral cephalogram. The subjects of this study consisted of a group of 25 individuals with normal occlusion and another group of 14 with anterior openbite. The obtained results of this study were as follows : 1. The maximum biting force of anterior openbite adults was less than that of normal occlusion adults. 2. In anterior openbite adults, there were negative correlations between the maximum, biting force and SN/MP, FMA, PP/MP mesurement of lateral cephalogram. 3. In anterior openbite adults, as the mesial angulation of lower first molar against the occlusal plane increased, the more the biting force decreased. 4. In both groups, the greater the number of tooth contact, the more the biting force increased. 5. In both groups, the center of effort for anteroposterior occlusal contact was located on the first molar region.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.38 no.4
• /
• pp.204-212
• /
• 2022

Purpose: The aim of this study was to compare changes of bite force, occlusal contact area, and dynamic functional occlusion analysis after occlusal stabilization splint therapy during sleep for one month in a patient with bruxism. Materials and Methods: From October 2021 to July 2022, sleep bruxism of 30 patients who visited the Department of Oral Medicine at Yonsei University College of Dentistry Hospital were recruited. The participants were divided into two groups: using an occlusal stabilization splint during sleep (treatment; n = 15) and not using an occlusal stabilization splint (control; n = 15). Before using the occlusal stabilization splint and one month after, bite force, occlusal contact area and dynamic functional occlusion analysis (ratio of left/right bite forces, average bite forces, maximum bite forces, and maximum contact areas during lateral and anterior and posterior mandibular movements) were performed. Results: There was no difference in bite force and occlusal contact area between the treatment group using the occlusal stabilization splint and the control group not using the occlusal stabilization splint during sleep for one month. However, there were significant differences in the average bite force and maximum bite force in the lateral and anterior and posterior mandibular movements and the maximum contact areas in the anterior and posterior mandibular movements. Conclusion: The occlusal stabilization splint is helpful for sleep bruxism patients who lateral and anterior and posterior mandibular movements. In addition, further studies are needed a double-blind study with a large population.

• The korean journal of orthodontics
• /
• v.40 no.5
• /
• pp.304-313
• /
• 2010

Objective: The aim of this study was to evaluate the occlusal force and contact area and to find its associating factors in Koreans. Methods: Occlusal force and contact area in maximum intercuspation were measured using the Dental $Prescale^{(R)}$ system in 651 subjects (15 with normal occlusion, 636 with various malocclusions divided into subgroups according to the skeletal pattern, Angle's molar relationship, age and gender). Results: Occlusal force of the normal occlusion group ($744.5{\pm}262.6N$) was significantly higher than those of the malocclusion group ($439.0{\pm}229.9N$, $p$ < 0.05). Occlusal force was similar regardless of differences in ANB angle or Angle's molar classification, however the increase in vertical dimension significantly reduced occlusal force ($p$ < 0.05). Conclusions: Occlusal force was significantly lower in the malocclusion group compared to the normal occlusion group, and in females compared to males, but it was not affected by age, antero-posterior skeletal pattern or molar classification. Although a hyperdivergent facial pattern indicated lower occlusal force compared to a hypodivergent facial pattern, the differences in skeletal pattern were not the primary cause of its decrease, but a secondary result induced by the differences in occlusal contact area according to the facial pattern.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.32 no.1
• /
• pp.47-59
• /
• 2016

Purpose: The aim of this study was to investigate the changes in occlusal force after loss of the lower first molar depending on the inclination and extrusion of the adjacent and opposing teeth by using a strain gauge. Materials and Methods: Anatomic teeth were used to reconstruct the normal dental arch with loss of the lower right first molar. A uniformly thick layer of silicone was applied to the root to mimic the periodontal ligament. Four stages of dies with varying degrees of inclination and extrusion of the adjacent and opposing teeth were constructed and attached to master model interchangeably by using a CAD/CAM fabricated customized die system. The strain gauges were attached to teeth and a universal testing machine was used to determine the changes in occlusal force. An independent t-test and one-way ANOVA were performed (${\alpha}=.05$). Results: While simulating chewing food, the upper first, second premolar and lower second molar showed greater occlusal force than before extraction. When the change of adjacent teeth's occlusal force with their progressive movement after molar loss was evaluated, the difference among four die models was significant and was in the decreasing aspect (P < 0.05). Conclusion: When the lower first molar was lost and the adjacent teeth did not move yet, the occlusal force in adjacent teeth was higher than that when the lower first molar still existed. In addition, the occlusal force in the upper premolars and lower second molar decreased significantly with the progressive movement of adjacent teeth.

• Journal of Oral Medicine and Pain
• /
• v.14 no.1
• /
• pp.81-88
• /
• 1989

저자는 정상 치열을 가지며 두개하악장애의 증상 및 병력이 없는 성인 21명을 대상으로 computerized occlusal analysis system인 T-Scan system을 이용하여 교합력에 따른 치아접촉수와 총치아접촉시간을 측정한 후 정량적인 분석을 시도하여 다음과 같은 결론을 얻었다. 1. 최대 측두근 전부 근활성도의 약 20%, 50%, 80% 수준의 교합력에서 치아접촉수의 평균은 각각 1.6개, 8.8개, 16.7개로 교합력이 증가할수록 유의하게 증가하였다. 2. 최대 측두근 전부 근활성도의 약 20%, 50%, 80% 수준의 교합력에서 치아당 치아접촉수이 평균은 대구치에서는 0.2, 1.4, 2.2 개였으며 소구치에서는 0.1, 0.5, 1.1개였고, 전치에서는 0.1, 0.2, 0.6개로 교합력이 증가함에 따라 유의하게 증가하였다. 3. 치아접촉분포로 구분된 대칭군과 비대칭군간의 총치아접촉시간에는 유의한 차이가 없었다.

• Journal of Korea Multimedia Society
• /
• v.12 no.1
• /
• pp.147-155
• /
• 2009

Occlusion force measuring and analysis is a diagnostic method of tooth dynamics through the related force analysis. In this paper, we design and implement a series of occlusion force measuring software and evaluate its utility as a base system for a new occlusion force measure and analysis system development. For the reason, we developed a group of tools to measure the normal and abnormal occlusion force. Firstly, we have visualized the occlusion force distribution with quantitative figures. The center of force (COF) variation was visualized the path of marker according to teeth dynamics and the distribution of occlusion forces in 14 tooth regions. Secondly, we have implemented a left and right tooth force balance measurement ratio tool to estimate a specific tooth region force. Furthermore, the measured occlusion force variation recorded in the software each 0.5 second. As the result of the physical examination by the accessed hardware of sensor sheet method, we confirmed the distribution and balance of forces effectively.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.29 no.1
• /
• pp.59-68
• /
• 2013

The objective of this study was to analyze occlusal contact pattern of 33 young adult males with normal occlusion during lateral excursion using T-scan III system which can measure the dynamic occlusion. Occlusal contact patterns were examined and categorized in non-working side disclusion point(more functionally acceptable position) not canine-to-canine position. Disclusion time, occlusal force, and occlusal force distribution ratio of upper canine at disclusion point during lateral excursion movement was also measured and compared among the groups divided according to contact patterns. The results showed that group function was clearly more dominant than canine guidance and other occlusal contact patterns different with existing patterns were found. There were significantly difference between groups in variables of T-scan measurement. T-scan III system is effective tools to analyze and evaluate occlusal contact patterns, disclusion time, occlusal force, and occlusal force distribution ratio of upper canine at disclusion point.