• Journal of Korean Home Economics Education Association
• /
• v.19 no.3
• /
• pp.19-36
• /
• 2007

The purpose of this study is to identify the consumer roles-gainer, allocator, buyer, user and disposer- of middle school students. The methodology that has been applied to this study was an ethnography study based on in-depth interviews with ten middle schoolers selected in Changwon, Gyeongnam. The result of this study is as follows; First, as gainers, teenagers usually gained their money from their parents. Because this tends to be not periodical, allowance education should be performed to both parents and teenagers. Second, as allocators, teenagers allocated most of their money in entertaining, shopping, traveling, leaving small amount of money for saving. Thorough education supported by school and home should be held for efficient and balanced allocation of acquired allowance. Third, teenagers as buyer should be encouraged to examine carefully in their buying goods and services thus increasing their ability in solving problems related to consume. Fourth, due to the fact that teenagers' role as user is very feeble, educations related to usually consumed products and consuming environments should be strengthened. Fifth, N generation's internet-based character is reflected in disposer rules so education for better disposal in internet world should be needed. Conclusively, education for teenagers' role as consumer will be efficient is linked with school, home, and society thus providing better standard for consumers.

• 전기의세계
• /
• v.18 no.1
• /
• pp.33-37
• /
• 1969

한전은 1968년 11월 3일 오전 10시 04분을 기하여 154KV 전계통의 직접접지방식 전환을 단행하였다. 종전의 P.C(소고선륜) 중성점접지방식을 직접접지방식으로 전환한것으로서 전력사상 특기 할 만한 근대화사업이며 다년간을 두고 추진해온 중요과제였다. 전력계통의 확대와 복잡화는 선진국가에서도 실시하고 있는 직접접지방식의 채택을 불가변하게 하였고 또한 1차 AID송배전차관도 이의 채택을 조건부로 승인되었던 것으로서 1968년 이후에 건설되는 송변전기기는 직접접지계에서만 운전할 수 있는 절연Level 650KV급이 도입되어 부산화력발전소 3호기가 준공되는 1968년 10월말까지는 직접접지전환이 반드시 이루어져야 하는 실정에 놓여 있었다. 그런데 직접접지방식의 단점인 인접통신선에 미치는 유도장해를 해결하는 문제가 다년간을 두고 진지하게 검토되어 왔으나 해결이 늦어지고 있었다. 사유는 154KV 계통에 인근된 통신선이라면 체신부, 내무부, 교통부, 국방부등 여러기관의 것이 있는데, 유도장해보안방법과 유도보상비문제에 대하여 전력측(상공부, 한전)과 통신측(상기의 체신부등)의 견해차가 해소되지 않기 때문이었다. 그것이 1968년 5월에 와서 전력.통신쌍방이 범국가적입장에서 제반애로를 무릅쓰고 최소한의 투자로 가능한 범위내의 보안책으로서 우선 Arrester 보안방식을 채택하기로 합의되어 경제장관회의를 거쳐 시공하기에 이른것이다. 이 란을 빌려 이 사업의 필요성과 경위및 통신선유도장해방지를 위한 보안방식내용을 간단히 소개함으로써 앞으로 이 분야의 항구적인 유도대책연구에 다소나마 참고가 된다면 다행으로 생각하겠다.면서 예측강우의 질이 저하되기 시작하였으나 QPM을 합성함으로써 생산한 BQPF는 보다 신뢰성있고 양호한 결과를 얻을 수 있었다. 이러한 결과들은 향후 정량적 분포형강우 예측을 이용한 실시간 홍수유출 예측시 댐운영자는 리드타임(홍수선행시간)을 충분히 확보함으로서 안정적이고 예측 가능한 홍수조절을 하는데 도움을 줄 수 있을 것으로 기대된다. 이와 같이 다양한 단기저수지 유입량의 예측정보 제공으로 다목적댐 저수지 운영모형의 효용성을 제고하여 향후 실제 저수지 유입량 예측에 이용함으로써 저수지 단기운영효율 개선에 기여할 수 있을 것으로 사료된다.다. 이것은 여름철 강수량이 증가하고, 호우발생빈도, 특히 8월의 강수일수가 증가하고 있다는 것과 밀접한 관련이 있다. 여름과 가을에 우리나라에 영향을 미치는 태풍의 수는 뚜렷한 추세를 보이지 않으나, 2002년 루사, 2003년 매미로 인하여 각각 6조원, 4조원 이상의 막대한 피해가 발생하였다. 태풍에 의한 피해액은 GDP 대비 약 0.9%(태풍 루사)로 최근 경제상장률과 비교해 보면, 상당한 비율을 차지한다. 우리나라에 영향을 미치는 태풍은 연근해의 해수면 온도가 높아지면 세기가 강해질 가능성이 높다. 폭설과 한파일수도 평년대비 최근 10년 감소하였고 일최저기온이 영하 $10^{\circ}C$ 이하인 날도 연간 발생일수가 감소하였다. 최근 10년간 우리나라 기후의 변화특성은 기온상승과 더불어 서리종료일이 앞당겨지고 열대야가 증가하고 폭설, 한파, 겨울철 일최저기온 영하 10도 이하인 날의 감소 등이 나타나고, 여름철 재해의 원인인 호우일수는 증가하는 추세이다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.3
• /
• pp.588-594
• /
• 2015

Although GPS technology for location positioning system has been widely used, it is difficult to be used in intelligent transport systems, due to the large positioning error and limited area for receiving radio signals. Thanks to the rapid development of LED technology, LED lights become popular in many applications. Especially, visible light communications (VLC) has raised a lot of interests because of the simultaneous functioning of LED illumination and communication. Recent studies on positioning system using VLC mainly focused on indoor environments and still difficult to satisfy positioning accuracy and simple implementation simultaneously. In this paper, we propose a positioning system based on VLC using the coordinate information of LEDs installed on the road infrastructure. Extracting the LED signal, obtained through VLC, from the easily accessible camera image, it is possible to estimate the position of the car on the road. Simulation results show that the proposed scheme can achieve a high positioning accuracy of 1 m when large number of pixels is utilized and the distance from the LED light is close.

• Journal of the Korean Society of Safety
• /
• v.22 no.6
• /
• pp.91-97
• /
• 2007

A survey of risk perception in Korea was conducted in 2001 with a special emphasis on industrial and technological risks. This article summarizes the characteristics of risk perception in consideration of socio-demographic background of respondents. The survey with sample size of 1,870 evaluates the perceived level of 25 risk items in the areas of transportation, chemicals, environment, industry, and nuclear power generation. Risks are categorized by using factor analysis to clarify attitudinal or behavioral properties of risk perception. Research findings show that the level of perceived risk does not correspond to the statistical level. Socio-demographic variables are significant predictors in explaining risk perception, or the discrepancies between "subjective" and "objective" risks. Effective risk communication can reduce the perceptional discrepancies, improve the awareness of technological risks, and ultimately facilitate the process of making and implementing policies for risk management and safety regulation. This article tries to provides policy guidelines for "Who is the target for risk communication" and "Which risk has the policy priority for safety improvement." Married females at the age of 30s and 40s with lower education and lower income in small cities are more vulnerable to risk misperception than other groups. More information and knowledge regarding unfamiliar, intangible, new technological risks should be delivered to the vulnerable groups for reducing perceptional bias. Society-wide safety can be improved by integrating policy, human, and social factors as well as techno-engineering advances.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.5
• /
• pp.89-97
• /
• 2021

The purpose of this study was to examine the awareness of early childhood teachers for early childhood creativity programs using physical computing in an effort to provide future direction for program development. The findings were as follows: First, 43.8 percent of teachers answered they were neutral about the need for these programs, while 40.5 percent replied these programs were necessary. Second, 73.8 percent thought the utilization of physical computing tools would be useful. Third, the largest group thought that the programs should be provided for five-year-olds. Regarding the frequency of programs, once or twice a week were considered most appropriate. Concerning the length of each activity, 20 to 30 minutes was identified as ideal, and study subjects preferred small group activities. In regard to the most effective theme for these programs, tools for daily life were considered best. As for educational content to be included in program planning, scientific inquiry and experiment were viewed as best, followed by the design/ production/utilization of creative works, game and play, and producing and playing musical instruments. Evaluation by a creativity test was chosen as the most desirable evaluation method.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.6
• /
• pp.1021-1028
• /
• 2018

As entering the international construction market became more difficult than the past, ODA projects can be a breakthrough for domestic engineering companies to enter the international market. However, since many companies compete for limited projects, it is necessary to reinforce the competitiveness of bidding success. The competitiveness is the result of accumulating experience, reputation, and networking through partnering. Therefore, depending on which partnering strategy has been taken over a long period, the bidding success is decided. The objective of this study is to identify the effective partnering strategy for bidding success. For this, the World Bank bid results, focusing on consulting projects in Vietnam, are collected. Using the bid results, inter-firm network representing the partnering relationship is constructed and the Social Network Analysis is conducted. After then, by conducting the Logistic Regression Analysis, effective partnering strategies are suggested. The result shows that the diversification strategy is advantageous for transportation and city development projects and the concentration strategy is advantageous for water projects. The partnering strategy for the consulting project proposed in this study will be used as a reference for the domestic engineering companies to enter the Vietnam construction market in the future.

• The Journal of the Korea Contents Association
• /
• v.21 no.3
• /
• pp.634-644
• /
• 2021

Despite the increased social demand for strengthening the punishment for ghost surgery in Korea, the governmental management is very passive compared to other offenses of medical law, and the punishment for ghost surgery is insufficient, so that medical malpractices are continuously occurring. A plastic surgeon who posted the names of clinics performing ghost surgery and the number of deaths on the internet bulletin board, was charged with the violation of the Information Telecommunication Act(defamation). Thus, this study aimed to present the legal/institutional issues and implications of defamation by the release of ghost surgery, by initially examining the charged case after posting the contents showing the death of patients by ghost surgery in clinics on the internet bulletin board. This study aimed to understand how strictly the court approached the ghost surgery in the aspect of public interest, and also to understand the judgment standard of punishment for defamation by investigating the publicly alleging facts and public interest by the disclosure of ghost surgery. Moreover, this study aims to provide the basic data necessary for guaranteeing the national health right by arousing attention to ghost surgery.

• Smart Media Journal
• /
• v.11 no.1
• /
• pp.67-80
• /
• 2022

Smart City Technology, which is significant in the era of the 4th industrial revolution, greatly increases the efficiency and productivity of cities nowadays. The purpose of this study is to present a strategic approach for industrial revitalization and overseas export by analyzing the current status of smart city-related companies and discovering high-priority smart city technologies. To this end, the smart city theory and ASEAN smart city were reviewed through prior research, and a survey of companies with domestic smart city technology was conducted. As a result of the survey, it is revealed that companies with smart city technology in Korea are highly willing to export to ASEAN countries. There is a strong desire to export the following technologies: construction, traffic, green·energy, etc. And there was a high willingness to export the following services: IoT, platform, AI, etc. The following solutions have been proposed as solutions to Strategic Plans to Promote the Export: 1) Deregulation and incentives, 2) Global human resource development, 3) Information provision and strengthening of local networks, 4) Financial and public relations support.

• Design Convergence Study
• /
• v.15 no.1
• /
• pp.135-150
• /
• 2016

Due to the development of communication technology and expansion of Intelligent Transport System (ITS), the car is changing from a simple mechanical device to second living space which has comprehensive convenience function and is evolved into the platform which is playing as an interface for this role. As the interface area to provide various information to the passenger is being expanded, the research importance about smart car based user experience is rising. This study has a research objective to propose the guidelines regarding the smart car user experience elements. In order to conduct this study, smart car user experience elements were defined as function, interaction, and surface and through the discussions of UX/UI experts, 8 representative techniques, 14 representative techniques, and 8 locations of the glass windows were specified for each element. Following, the smart car users' priorities of the experience elements, which were defined through targeting 100 drivers, were analyzed in the form of questionnaire survey. The analysis showed that the users' priorities in applying the main techniques were in the order of safety, distance, and sensibility. The priorities of the production method were in the order of voice recognition, touch, gesture, physical button, and eye tracking. Furthermore, regarding the glass window locations, users prioritized the front of the driver's seat to the back. According to the demographic analysis on gender, there were no significant differences except for two functions. Therefore this showed that the guidelines of male and female can be commonly applied. Through user requirement analysis about individual elements, this study provides the guides about the requirement in each element to be applied to commercialized product with priority.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.7
• /
• pp.863-870
• /
• 2023

Ship capsize accidents are common in coastal waters, particularly involving small fishing boats. To prevent there overturing accidents in small fishing boats, their stabilities must be assessed at the initial design step. However, the available information during the initial design step is limited, posing challenges in performing a reliable stability evaluation. Therefore, this study presents a plan to estimate the transverse metacenter (GM) of small fishing boats using parameters such as KM, KG, and TRIM that can be determined at the initial design step. Stability was evaluated by comparing GM with the minimum transverse metacenter (GMmin) specified in the standard safety evaluation criteria for fishing boats. To calculate the required trim value for hydrostatic characteristics using K-SHIP, a stability assessment program provided by the Korea Maritime Safety and Transportation Corporation, the initial trim state is estimated based on the ship lines using the commercial CFD program STAR-CCM+. GM is then calculated by assessing the hydrostatic characteristics in relation to the boat lines using K-SHIP. Furthermore, the stability of the fully loaded state is compared by subtrcating GM from GMmin. One constructed ship is designated as the standard ship, and the stability assessment method proposed in this study is applied to evaluate stability and validate its effectiveness. Consequently, the representative line of a 4.99-ton fishing boat and nine modular lines models derived from it were evaluated, ultimately identifying a relatively superior stability.