• Journal of the Korea Convergence Society
• /
• v.6 no.6
• /
• pp.285-291
• /
• 2015

FTMS, TCS, ITS equipment such as high-pass highway are just a situation that does not lack traceability and passive surveillance is related to fault DB has so far consisted of an integrated operations management to maximize utilization of the facility. In addition, there is no replacement parts are replaced when a failure occurs, increasing the number of parts and repair time I have trouble growing, and becoming a service interruption whenever you replace each time. In this study, proactively manage the failure history of a highway facility ITS tries to preventive maintenance. Therefore, the error history is based on the reliability of the high-pass facilities theory to calculate the reliability of the system through a systematic statistical analysis Operational Availability. The fault number and the time the replacement period through the estimate decreases and can reduce the budget expenses by securing the spare parts quantity, establish a management plan in part by improving the quality of the system through constant preventive maintenance, quality of service at all times It may direct the non-stop operation state of the available state.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.3
• /
• pp.52-63
• /
• 2009

Recently in Korea, in the case of metropolis, the urban signalized intersections are controlled by traffic information center or ITS center. Cheon-an City also established traffic information center through the 1st.-$\sim$3rd. ITS public construction and has managed this center that includes bus information service, traffic information collection and providing service, parking information service, and traffic responsive control system. In the Cheon-an metropolitan traffic signal operation, traffic signal controllers were grouped by the each main traffic flow axes and performed with coordinated signal timing for the signalized arterials, and also cycle and split changed by realtime traffic demands. Cheon-an urban traffic responsive control system was evaluated by intersection delay and speed, then it was verified that the delay decreased and vehicle speed improved. However, the rural signal control system to connect adjacency town was evaluated to have lower status than urban area due to the unimproved TOD (Time of day) plan. Therefore actuated signal control was examined for substitutive control system in isolated signal intersection. The aim of this article is to compare actuated signal control with TOD mode in the rural intersection of Cheon-an and to fine superiority of these two control mode, with evaluation of vehicle delay by using HCM(2000) method and by micro-simulation CORSlM. The result of field test show that actuated signal control gave better performance in delay comparison than the existing TOD signal control. And simulation outcome verified that non-optimized TOD has higher delay than optimized TOD mode, non-optimal actuated mode, and optimal actuated signal control mode. Particularly, these three modes delays had not different values according to the paired sample t-test. This is because small traffic demands were loaded in each links. This suggested actuated signal control is expected to be more effective than TOD mode in some rural isolated intersections which frequently need to survey for traffic volume.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.8
• /
• pp.1843-1850
• /
• 2004

If the location information of a great number of cars kept for business with telematics terminals is acquired and managed efficiently, this information forms the foundation for controlling cars and traffic flows. The studies on the pure spatial indices have focused on the efficient retrievals. However, the acquisition and management of the terminal location of moving objects are more important than the efficiency of the query processing in the moving object databases. Therefore, it will be need to adopt parallel processing system for the moving object databases which should maintain the object's current location as precise as possible. This paper proposes a location management system using CDMA communications of telematics terminals. More precisely, we propose a architecture of spatial indexing mobile objects using multiple processors, and also newly propose a method of splitting buckets using the properties of moving objects in order to minimize the number of database updates. We also propose a acquisition method for gathering the location information of moving objects and passing the information of the bucket extents in order to reduce the amount of passed messages between processors.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.7
• /
• pp.1335-1343
• /
• 2012

Although navigation systems and automatic identification technologies are in use for nautical safety of ocean vessels, ship collisions are increasing due to the growing number of overseas transportations. Since these accidents are mostly caused by the watch officers and crews' human mistakes, it is essential to develop a new set of systems to prevent such misfortunes. Therefore, we suggest a control and management system which monitors crews in order to conduct secure on-board navigation and nautical safety. We also materialized a mobile terminal system and portable device for the crews to check the status of the ship, and we designed a platform for an integrated surveillance system to assure a harmless voyage. Lastly, we attested the mutual connections of integrated safety-related data.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.10
• /
• pp.43-51
• /
• 2014

Recently, National Emergency Management Agency constructs integrated information system for preventing national earthquake based on underground information. In the past, there are numerous difficulties in construction and management of underground information, because underground information is constructed by each management agency. But a link and application of underground information are available because of government 3.0. This study shows the integrated information system for preventing national earthquake based on real-time link of underground information. The integrated information system for preventing national earthquake developed in this study consists of boring information input modules, underground information search/analysis modules based on V-world tile map, user authority management modules, user management modules and real-time liaison interface modules. Also, this study proposes enhancement plan to construct integrated information system for preventing national earthquake stably and strongly. Stability test conduct on stability of data storage, system stability and consistency of processing speed test results show stability of the integrated information system for preventing national earthquake is high.

• Journal of Korean Society of Transportation
• /
• v.36 no.1
• /
• pp.13-22
• /
• 2018

Buses, one of the representative public transportation modes, are divided into a vareity of service types according to the purpose of operation, operating distance, and management agencies. Although bus-involved crashes may cause large amount of damage due to the higher number of passengers boarded on a bus, prior research has little focused on crash severity according to bus service types. This study aims to investigate factors influencing crash severity in bus-involved crashes and to present policy implications to reduce crash severity by bus service type. To do this, bus-involved crash data from the Traffic Accident Analysis System (TAAS) during five-year period are used. Ordered probit models for three types of bus service, i.e., city bus, suburban and express buses, and charter buses, are estimated to analyze the factors of accident severity. The results show that there are significant differences of factors affecting crash severity among the types of bus services while speed and road surface influence all the types of buses. In case of local buses, time of day, roadway alignment, and installation of a traffic signal are found to be statistically significant factors. Seat belt and road class have significant effects on injury severity of the intercity and express buses. Chartered buses have time of day, driving experience, seatbelt, traffic signal, and day of week as the significant factors. The results of this study are expected to contribute to the reduction of the crash severity by each bus service type.

• The Korean Journal of Air & Space Law and Policy
• /
• v.33 no.2
• /
• pp.345-366
• /
• 2018

Article 37 of the International Convention on Civil Aviation requires that rules should be adopted to keep in compliance with international standards and recommended practices established by ICAO. As SARPs are revised annually, each ICAO Member State needs to reflect the new content in its national aviation Acts in a timely manner. In recent years, data-driven international standards have been developed because of the important roles of aviation safety data and information-based legislation in accident prevention based on human factors. The Safety Management System and crew Fatigue Risk Management Systems were reviewed as examples of the result of data-driven rulemaking. The safety management system was adopted in 2013 with the introduction of Annex 19 and Chapter 5 of the relevant manual describes safety data collection and analysis systems. Through analysis of safety data and information, decision makers can make informed data-driven decisions. The Republic of Korea introduced Safety Management System in accordance with Article 58 of the Aviation Safety Act for all airlines, maintenance companies, and airport corporations. To support the SMS, both mandatory reporting and voluntary safety reporting systems need to be in place. Up until now, the standard of administrative penal dispensation for violations of the safety management system has been very weak. Various regulations have been developed and implemented in the United States and Europe for the proper legislation of the safety management system. In the wake of the crash of the Colgan aircraft, the US Aviation Safety Committee recommended the US Federal Aviation Administration to establish a system that can identify and manage pilot fatigue hazards. In 2010, a notice of proposed rulemaking was issued by the Federal Aviation Administration and in 2011, the final rule was passed. The legislation was applied to help differentiate risk based on flight according to factors such as the pilot's duty starting time, the availability of the auxiliary crew, and the class of the rest facility. Numerous amounts data and information were analyzed during the rulemaking process, and reflected in the resultant regulations. A cost-benefit analysis, based on the data of the previous 10 year period, was conducted before the final legislation was reached and it was concluded that the cost benefits are positive. The Republic of Korea also currently has a clause on aviation safety legislation related to crew fatigue risk, where an airline can choose either to conform to the traditional flight time limitation standard or fatigue risk management system. In the United States, specifically for the purpose of data-driven rulemaking, the Airline Rulemaking Committee was formed, and operates in this capacity. Considering the advantageous results of the ARC in the US, and the D4S in Europe, this is a system that should definitely be introduced in Korea as well. A cost-benefit analysis is necessary, and can serve to strengthen the resulting legislation. In order to improve the effectiveness of data-based legislation, it is necessary to have reinforcement of experts and through them prepare a more detailed checklist of relevant variables.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.170-175
• /
• 2008

The research team for the virtual construction development was established with the support of Korea Ministry of Construction and Transportation, and KICTEP (Korea Institute of Construction and Transportation Technology Evaluation and Planning). Its aims are to develop system that is to improve productivity & quality, to create a higher value-added business, and to cultivate international competitiveness in the construction industry. The virtual construction system is a design, engineering, and construction management information system that allows the project participants to effectively share the information throughout the construction life cycle with the support of 3D and design information. To achieve this, the research team focuses on developing several systems. First, the team focuses on developing for the pre-planning, the structural engineering, MEP, and the 3D based estimation system. Second, they focus on developing a simulation system for the construction process planning and feasibility study with help of the virtual reality technologies. Third, they focus on developing the CPLM (Construction Project Life-cycle Management) system for managing construction project data, and the decision support system that makes the collaboration among the project participants based on 3D technologies and information. We also focus on developing the SDAI (Standard Data Access Interface), the localized guideline for 3D design, and a training program. In addition, we focus on developing the undeveloped area of the commercial system and building an environment that can support the communication and collaboration in the construction life-cycle rather than developing the existing and commercialized system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1998.11a
• /
• pp.428-433
• /
• 1998

국제적으로 개발되고 있는 전자해도는 선박의 대형화 고속화로 인한 각종해난사고의 예방과 급증하는 해상교통을 효율적으로 처리하기 위한 안전항해시스템의 기본데이터로 사용된다. 국제기구인 IHO는 1996년에 전자해도관련 국제표준을 제정하고 각 회원국에 전자해도 개발을 강력히 권고하였으며 이에 따라 국내에서도 국립해양조사원이 1999년 완료를 목표로 전자해도 개발을 추진하고 있다. 전자해도의 개발과정은 기존의 종이해도를 디지틀화 하는 것에서 출발하며 이 과정에서 CIS를 이용한다. 국내에서는 수로데이터의 처리에 강력한 기능을 갖고 있는 CARIS를 사용하여 수치해도를 제작하고 이 데이터를 기본으로 전자해도 데이터를 생성한다. 실제로 종이해도를 스캔한 이미지 파일을 벡터화하고 각종 관련 규약에 맞게 편집하여 수치해도를 제작하며 이를 바탕으로 S-57 기반의 전자해도를 제작한다. 이 과정에서 CARIS는 이미지의 벡터화, 각종 심볼의 입력, 좌표변환, 오브젝트의 입력ㆍ수정등을 수행한다. 본 논문에서는 KRISO가 1995년 말부터 국립해양조사원에서 위탁받아 연구한 전자해도 개발과정과 검수과정을 소개하고 그 과정에서 사용된 CARIS의 활용에 대해 설명한다. 이러한 고찰을 통해 향후 중요하계 다루어질 전자해도의 공급 및 관리시스템의 GIS 활용을 고려할 수 있을 것이다.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2003.04a
• /
• pp.394-399
• /
• 2003

도시 지역의 대부분을 차지하는 건물에 대한 3차원 정보는 도로, 교통 등의 시설물관리시스템 구축, 도로계획, 택지개발, 도시계획 등 여러 분야에 필요하다. 현재 항공사진, 고해상도 위성영상, LiDAR 자료, 수치사진측량 시스템 등의 보급과 분석 알고리즘의 발전으로 인하여 도시지역 건물 3차원 모델링에 대한 연구가 활발히 진행되고 있는데, 그 중에서 정밀한 DSM 취득이 가능한 LiDAR 자료가 도시지역 건물 3차원 모델링에 가장 유망한 자료이다. 그러나 LiDAR 자료만을 이용할 경우에는 선형화 과정 등의 수작업이 많이 들어가고, 주관적인 재구성과정이 들어가야 하는 문제점이 있다. 따라서 본 연구에서는 수치지도를 LiDAR 자료와 같이 이용하여 건물 3차원 모델링시 작업자의 수동적인 과정을 단축하였다. 항공사진과 해석도화기를 이용한 정확도 평가 결과 1:5,000 수치지도 정확도 규정을 만족하는 도시지역 건물 3차원 모델링이 가능하였고, 비교적 자동화된 공정을 이루었다.