• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.30 no.1
• /
• pp.66-73
• /
• 2007

일반 투자안의 의사결정에서와 마찬가지로 산업설비의 경제성 분석에서도 가장 중요한 결정 요소 중의 하나가 설비의 생존곡선 추정이다. 설비의 자산 가치가 감소하는 원인은 여러 가지가 있으나, 여러 원인 중 물리적 훼손이 과거의 산업설비에서는 가장 중요한 원인이었으므로 기존의 생존모형 분석에서는 lows 생존곡선을 이용하여 설비의 생존곡선을 추정하였다. 그러나 새로운 기술상의 변화로 인한 첨단 생산시스템의 설비교체 분석 시에는 적합지 않다. 따라서, 본 연구에서 제안된 혼합형 Weibull 함수를 이용하여 설비의 폐기 형태를 추정함으로써 설비들의 실제적인 생존곡선을 정확하게 파악할 수 있다.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.10 no.16
• /
• pp.75-80
• /
• 1987

This paper is deals with the preventive replacement for the equipment which fails only when the total amount of damage reaches a prespecified failure level. Most of replacement model use time as their decision variable, but it is not appropriate for the cases in which failures dependent on their cumulative damage levels. In this paper, a new type preventive replacement model is introduced in which an equipment is replaced before failure when the cumulative damage reaches a certain level or replaced on failure, whichever occures first. The optimal replacement damage levels which minimize total expected cost are obtained by the Dynamic programming Method when the number of use of the equipment is finite. A numerical example is also presented. The optimal preventive replacement policy when the equipment will be used for a finite time span is also discussed.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.14 no.24
• /
• pp.7-13
• /
• 1991

Recently, in FMS composing of various automatic equipments, the machines with lower operating costs, and with higher operating costs and replacement costs resulting from deterioration have been appearing successively as a result of rapidly advances in technology. "Control Limit Policy" [1] by using Markov decision policy, a kind of optimal economic replacement decision, well reflects and represents this environment. In this paper, it is reviewed that the decision method of the forecasted replacement alternatives in planning horizon under technological advances is derived. The proposed method is applied to a numerical example and some characteristics are examined by sensitivity. It is clarified that the method is relatively insensitive to changes of parameters at the present decision. decision.

• Journal of Korean Institute of Industrial Engineers
• /
• v.21 no.4
• /
• pp.555-570
• /
• 1995

We consider a preventive replacement policy for a cold-standby system with N components, in which only one component is in operation at a time. If the component in operation fails, a standby component is immediately switched into operation. If all components fail, the system fails. The system is inspected at random poins in time to determine whether it is to be replaced or not. If the number of failed components at the time of inspection exceeds a threshold value r, the system is replaced. Otherwise the decision is put off until the next inspection point arrives. Under the cost structure which includes a replacement cost, a system down-time cost and a holding cost of the components, we develop an efficient procedure to find the optimal control values N and r, which minimize the expected cost per unit time.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.523-523
• /
• 2016

본 연구에서는 두 지역의 실제 상수관망에 대해서 부정류해석을 수행하였고 각각의 상수관망에 필요한 부정류피해 최소화방안을 제시하였다. 본 연구에서는 실제 도시 상수관망인 광탄 GT1-1 소블럭 상수관망을 대상으로 부정류해석을 수행하였고 신뢰성해석을 통하여 구역별 파괴 확률을 산정하였다. 또한 상수관망의 운영인자로써 물 사용량지수와 급수전지수, 사용연수지수, 수압지수, 사고이력지수를 개발하여 광탄 GT1-1 소블럭 상수관망의 운영지수에 의한 구역별 위험도를 분석하여 상대적으로 안전에 취약한 구역을 선정할 수 있었다. 광탄 GT1-1 소블럭 상수관망을 7개 구역으로 나누어서 신뢰성해석과 운영지수에 따른 위험도 분석을 수행하였고 상대적으로 수격압으로 인한 관로파괴에 취약한 구역을 선정할 수 있었다. 또한 광탄 GT1-1 소블럭 상수관망에서는 구역별 파괴확률과 운영지수에 따른 위험도 순위가 같게 나타났다. 본 연구에서 개발된 상수 관망의 신뢰성해석모형과 운영지수를 운영관리에 적용한다면 향후 개량이나 교체가 필요한 상수 관로의 우선순위 선정에 유용하게 사용될 것으로 판단된다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.7
• /
• pp.703-708
• /
• 2013

Conventional total hip joint replacement(THR) surgery requires a long incision and long rehabilitation time. The stem used in THR is inserted into the cancellous bone of the femur where it plays the role of the artificial joint. Minimally invasive surgery(MIS) has been devised to reduce muscle damage to patients. In this study, a mechanical stem was developed on the basis of MISto reduce the incision length through the principle of the gear. The mechanical stem consists of six components. A prototypical model for a mechanical stem was fabricated using an acryl-based polymer, and its workability was confirmed. To actualize the mechanical stem, a three-dimensional Bio-CAD modeling technique was applied. The hip joint area based on computed tomography(CT) was reconstructed. The safety of the mechanical stem by applying more load than the weight of a man under virtual surgery environment conditions was confirmed by finite element analysis.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.2
• /
• pp.119-125
• /
• 2020

A high Reynolds number transonic wind tunnel has been built in 2018 at Agency for Defense Development(ADD). The tunnel has a closed circuit with a 1.5m×1.5m test section and is injection driven from a 140bar air supply system. The Mach number range is 0.3-1.2 with a conventional contracting nozzle and 1.4 with a convergent-divergent contraction. The stagnation pressure range is 100-550kPa at the lowest Mach number. An AGARD-B standard model is tested in the transonic wind tunnel to obtain 6-DOF aerodynamic coefficients. The results are compared with those obtained from ADD trisonic wind tunnel and others. We verify that the transonic wind tunnel become available to develop an aircraft from the testing results.

• Korean journal of communication and information
• /
• v.74
• /
• pp.72-108
• /
• 2015

The more mobile technology evolves, the more users are trapped in mobile technology by being encouraging the replacement with state-of-the-art technology. However, the use of device is not entirely determined by technology's attributes itself. The meaning of smartness can be varied by 'how users accept and perceive immediate spatial perception from reality to mobile space' without recognizing the boundaries between them. This study focuses on the analysis of 'smart usage' for smartphone and this is verified the concept of 'smart usage' by the second-order measurement model. The result show that the concept organization of 'smart usage' had been differentiated and elicited by the six factors - 'multifunctional use readiness', 'administrative efficiency', 'embedded media', 'device connectivity', 'user-friendly optimization', and 'external connectivity(being connected). According to the conceptual factors, 'smart usage' can be explained in an individual's autonomous ability to control a mobile interface and to utilize a wide range of applications of smartphones.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.8
• /
• pp.691-697
• /
• 2016

Remanufacturing refers to restoring a used product to an acceptable condition for resale in the market of remanufactured items. In this paper, we deal with the acquisition price and remanufacturing decision for remanufacturing systems in the case where the demand for the remanufactured product in a single period is known and the return quantity of the used product is determined by its acquisition price. The quality of the acquired used product is categorized into two classes, high and low, through inspection and different qualities incur different remanufacturing costs. The probability that the acquired used product is categorized as high class can be a constant or random variable. We derive the expected total cost functions, obtain the optimal solutions, and interpret the managerial meaning of the optimal solution for each case. The sensitivity of the optimal solution with respect to the variation of the inspection cost and uncertainty of the quality of the used product is investigated through numerical examples.

• Journal of Korea Technology Innovation Society
• /
• v.20 no.4
• /
• pp.858-887
• /
• 2017

This study deals with the cases of policy changes of the research council system which exists since 1999 as a policy tool to achieve the goals for autonomy and independence of Government-funded Research Institutes (GRIs) in the field of science and technology and their cooperation and organic connection. The purpose of the study was to analyze through which process policies about the research council system have changed and whether they resulted in the successful achievements of the aimed policy goals, and to contribute to the effective policy implementation in the future. The Research Council System of Science and Technology has been undergoing a change for four government replacements (from Kim Dae-jung's Government to Park Geun-hye's Government). In this study, the major policy making factors and the policy change process of each government case are analyzed in comparison using Kingdon's multiple streams framework, as a result, their policy change type by the Hogwood and Peters's theory and the achievement of their policy goals of autonomy and responsibility were examined.