• Proceedings of the Korea Society for Simulation Conference
• /
• 1999.10a
• /
• pp.87-92
• /
• 1999

교차로 접근지체의 산정은 간선도로의 서비스수준 평가에 있어서 가장 중요한 요소 중의 하나이다. 교차로 접근지체는 상류부 교차로에서 진입하는 교통에 대한 균일지체와 그 이외 단일로 상에 존재하는 세가로등에서 유입되는 교통에 대한 무작위지체, 1회의 신호주기에 교차로를 통과하지 못한 교통에 대한 잔여지체 등과 연동보정계수를 이용하여 산정된다. 우리나라를 비롯한 대부분의 나라에서는 미국에서 차량의 지체와 연동보정계수를 이용하여 개발된 교차로 접근지체 산정식의 구조를 그대로 수용하고 있다. 그러나 도심부 신호교차로 사이의 단일로에 보행자를 위한 횡단신호가 설치되어 있는 경우, 이러한 단일로 횡단신호가 하류부 교차로의 접근지체에 미치는 영향이 있을 것으로 판단한다. 따라서 미국과는 달리 신호교차로간의 간격이 크고, 단일로 상에 보행자용 횡단시호 설치가 빈번한 우리나라의 실정에서는 이에 대한 영향을 분석하여 교차로 접근지체 산정 시 이를 반영하는 것이 바람직하다. 본 연구에서는 단일로 횡단신호가 하류부 신호교차로에서의 접근지체에 미치는 영향을 분석하기 위하여, 상류부 교차로와 단일로 중간부 횡단보도와의 거리, v/c 비, 신호 offset 등 상황을 설정하여 TRANSYT-7F를 이용하여 시뮬레이션을 수행하였다. 본 연구에 의하면 단이로 중간의 횡단신호가 상류부 교차로의 신호와 연동되지 않는 경우에는 하류부 교차로의 접근지체에 미치는 영향이 거의 없는 것으로 나타났으며, 연동 시에는 상류부 교차로와의 거리, v/c 비, 신호 offset 등에 따라 최고 80% 이상 까지 접근지체가 증가하였다. 일반적으로 신호 offset이 40%에서 60% 사이로 연동상태가 불량할수록 하류부 교차로에서의 접근지체가 증가하는 것으로 나타났으며, 그 외에 변수에 대하여서도 신호 offset에 따라 다른 정도로 접근지체에 영향을 미치는 것으로 나타났다. 따라서 현재 우리나라의 신도시 개발 시 일반적으로 나타나는 대규모 구획(super block)과 이로 인하여 불가피한 단일로 중간부의 횡단신호의 설치는 교통운영 측면에서 재고되어야 할 것으로 판단된다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.1
• /
• pp.424-430
• /
• 2021

Determining the cause of a traffic signal violation is difficult if the drivers' claims are contradictory. In this study, the process of identifying signal violations using a simulation was presented based on cases. First, statements from the driver or witness whose cause of the signal violation is unclear were excluded. Second, the final position, final location, damaged area, steering status, braking status, and road surface traces of the vehicle were collected. The impact point was investigated from the stop line. Third, simulation data were modified and entered until the collision situation of the accident vehicle and the final stop position were met. Fourth, if the simulation results were consistent with the crash situation, the facts were verified by cross-validation to conform to the driver's statement. The results of the simulation showed that the Lexus entered the left turn signal in the intersection at approximately 55 km/h. In comparison, the Sonata driver saw the vehicle straight ahead at the intersection, entered the 72 km/h intersection, and collided with the Lexus. Therefore, the Sonata was identified as a signal violation, and the claims of the Sonata driver, witnesses, and police were contradictory.

• International Journal of Highway Engineering
• /
• v.13 no.4
• /
• pp.143-150
• /
• 2011

Roundabouts, which belong to traffic circles, are intersections which are similar to the existing rotary form. Roundabouts recently have been constructed all around the world. And interests in roundabouts are increasing in Korea. However, there are lacks of research on pedestrian volume which has a great influence on operation efficiency of roundabouts in urban area. Therefore, this study suggests efficiency analysis and pedestrian signals in roundabouts according to the pedestrian volume. First, VISSIM simulation was organized to analyse volume of one lane roundabouts in urban area. Second, average delay of intersections was calibrated by VISSIM simulation dividing signalized intersections and non-signalized intersections depending on pedestrian volume. Finally, this study showed that roundabouts are suitable when pedestrian volume was under 200person/hr and traffic circles with a pelican signal are suitable when pedestrian volume was over 200person/hr. And when pedestrian volume and traffic volume are over 600person/hr and 1,500vph respectively, fixed signalized intersections fit well.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2000.11a
• /
• pp.440-443
• /
• 2000

오늘날 도시교통은 계속적으로 증가하는 자동차에 의해 극심한 정체를 겪고 있다. 복잡한 교통상황에서 도시의 한정된 도로를 최적으로 이용함으로써 교통의 흐름을 효율적으로 통제할 수 있는 시스템의 필요성이 높아지고 있다. 멀티 에이전트 시스템은 이러한 복잡한 교통 상황을 해소하는 새로운 방법으로 인식되고 있다. 본 논문에서는 Visual C++ 언어를 이용하여 개발하고 교차로망 시뮬레이션을 위한 에이전트 기반의 퍼지 논리 제어기를 제안하였다. 제안된 퍼지 논리 제어기는 교통량이 많더라도 교통신호 주기를 통제하기에 적합한 방법이며, 이 방법의 효과를 교차로망 시뮬레이션을 이용하여 입증하였다.

• Journal of Korean Society of Transportation
• /
• v.31 no.6
• /
• pp.43-52
• /
• 2013

A roundabout is a form of circular intersection in which traffic travels counterclockwise around a central island and in which entering traffic must yield to circulating traffic. It has been known that a roundabout provides substantially better operational and safety characteristics than other intersections including rotaries. Recently, a roundabout has started to be constructed due to its efficiency, safety, and other advantages of a roundabout comparing other intersections in Korea. However, there has been no guideline to be used to decide appropriate intersection types considering given conditions of the intersections. To solve this problem, the guideline with traffic volume to choose the suitable intersection types was developed based on analysis results using the SIDRA software which is generally used to analyze operational effects of roundabouts. It was found that a roundabout is more efficient than signalized intersection when the traffic volume is between 125 and 450 veh/h on one lane road and roundabout is not recommended when there are more than 30% left turn traffic. The optimal traffic volume provided in this research will be usefully used in planing and designing roundabouts in Korea.

• Journal of Korean Society of Transportation
• /
• v.19 no.3
• /
• pp.115-131
• /
• 2001

The Purpose of this study is to develop a simulation model for large-scale network with interrupted flow as well as uninterrupted flow. The Cell Transmission(CT) theory is used to simulate traffic flow. Flow transition rules have been newly developed to simulate traffic flows at merging and diverging sections, and signalized intersections. In the model, it is assumed that dynamic OD table is exogenously given. Simulation results for toy network shows that the model can explain queue dynamics not only in signalized intersections of urban arterials, but also in merging and diverging sections of freeway. In case study, the model successfully simulated traffic flows of 145,000 vehicles on CBD network of city of Seoul with 74 traffic zones, 133 signalized intersections among 395 nodes and 1110 links.

• Journal of Auto-vehicle Safety Association
• /
• v.13 no.4
• /
• pp.114-122
• /
• 2021

In this paper, an automated vehicle intersection collision accident was analyzed through simulation. Recently, the more automated vehicles are distributed, the more accidents related to automated vehicles occur. Accidents may show different trends depending on the sensor characteristics of the automated vehicle and the performance of the accident prevention system. Based on NASS-CDS (National Automotive Sampling System-Crashworthiness Data System) and TAAS (Traffic Accident Analysis System), four scenarios are derived and simulations are performed. Automated vehicles are applied with a virtual system consisting of an autonomous emergency braking system and algorithms that predict the route and avoid collisions. The simulations are conducted by changing the sensor angle, vehicle speed, the range of the sensor and vehicle speed range. A range of variables considered vehicle collision were derived from the simulation.

• International Journal of Highway Engineering
• /
• v.12 no.2
• /
• pp.1-7
• /
• 2010

This study deals with the unsignalized intersection delay in the urban transportation demand forecasting. The objectives are to develop the unsignalized intersection delay models and to comparatively analyze the applicability of the above models. In pursuing the above, this study gives particular attentions to simulating by KHCS program and implementing the case study of Cheongju using EMME/2. The major findings are the followings. First, the 8 unsignalized intersection delay models were developed through 480 simulating results, which are all statistically significant. Second, the estimates by the unsignalized delay models were analyzed to be most fitted to the observed traffic volume data.

• Journal of the Korea Society for Simulation
• /
• v.20 no.3
• /
• pp.29-39
• /
• 2011

The appointment system is widely used to facilitate customer access to service in many industries including healthcare and others. Because of its importance, much research has investigated how to build an effective appointment policy under various environments. However, most research has considered a single-server service system. The objective of this work is to evaluate several appointment policies in a two-stage service system in which multiple servers are available and build separate appointments at the second-stage. In such a system, we propose and evaluate the staggering appointment policy. Simulation experiments indicate that the proposed staggering appointment policy outperforms other traditional appointment policies in terms of customer waiting time, server idle time, and the number of customers who are later to scheduled appointments.

• Journal of Internet Computing and Services
• /
• v.6 no.6
• /
• pp.85-97
• /
• 2005

In this paper, we construct the traffic information database by using the acquired data from the traffic information devices installed in road network, and, by referring to this database, propose the intersection simulation system which can dynamically manage the real-time traffic flow for each section of road from the intersections, This system consists of hierarchical 3 parts, The lower layer is the physical layer where the traffic information is acquired on an actual road. The traffic flow control framework exists in the middle layer. The framework supports the grouping of intersection, the collection of real-time traffic flow information, and the remote monitoring and control by using the traffic information of the lower layer, This layer is designed by extending the distributed object group framework we developed. In upper layer, the intersection simulator applications controlling the traffic flow by grouping the intersections exist. The components of the intersection application in our system are composed of the implementing objects based on the Time-triggered Message-triggered Object(TMO) scheme, The intersection simulation system considers the each intersection on road as an application group, and can apply the control models of dynamic traffic flow by the road's status. At this time, we use the real-time traffic information collected through inter-communication among intersections. For constructing this system, we defined the system architecture and the interaction of components on the traffic flow control framework which supports the TMO scheme and the TMO Support Middleware(TMOSM), and designed the application simulator and the user interface to the monitoring and the controlling of traffic flow.