• Annual Conference on Human and Language Technology
• /
• 1998.10c
• /
• pp.41-48
• /
• 1998

교정 시스템에 나타나는 오류 유형들 중에는 전체적인 교정률에 차지하는 비중은 적지만 출현할 때마다 틀릴 가능성이 아주 높은 오류들이 있다. 기존의 교정 시스템에서는 이러한 오류들에 대한 처리가 미흡한데, 철자 오류와 띄어쓰기 오류 중 형태가 비슷하거나 같은 형태가 다른 기능을 함으로써 발생하는 오류들이다. 이러한 오류는 일반 문서 작성자뿐만 아니라 한글 맞춤법에 대해 어느 정도 지식을 가진 사람의 경우에도 구분이 모호하다. 복합 명사와 미등록어를 제외한 오류 중 약 30%가 여기에 속한다. 따라서 본 논문에서는 이러한 오류 유형들을 분류하고, 이 중에서 빈번하게 출현하는 오류에 대한 교정을 시도하고, 오류 유형들이 문장 내에서 어떤 분포를 가지는지 알아본다. 약 617만 어절의 말뭉치를 이용하여 해당 형태와 다른 성분들과의 관련성을 조사하여 교정 방법을 제시하고, 형태소 분석을 하여 교정을 행한다. 코퍼스 655만 어절 대상으로 실험한 결과 84.6%의 교정률을 보였다. 본 논문에서 제시한 교정 방법은 기존의 교정 시스템에 추가되어 교정 시스템의 전체 교정률을 향상시킬 수 있다. 또한 이와 비슷한 유형의 다른 어휘 교정에 대한 기초 자료로 사용될 수 있을 것이다.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05a
• /
• pp.433-439
• /
• 1996

노심 외각에 설치되어 노심 외각으로 누설되는 중성자를 검출하여 노심내의 출력 변화를 지시해 주는 노외계측기(Excore Detector)는 운전중 노심의 변화를 정확히 감지하도록 정기적으로 교정되어져야 한다. 노외계측기는 노내계측기(Incore Detector)를 통하여 측정되어진 축방향 출력편차(Axial Offset)를 이용하여 교정하고 있다. 기존의 방법은 노내계측기로 최소한 4회 노심 출력을 측정하여 최소자승법(Least Square Method)으로 상수들을 구한후 노외계측기를 교정한다. 여기서 소개되는 단순 노외계측기 교정법은 노내계측기로 2회 측정되어진 자료들을 이용하는 2점 교정법과 1회 측정되어진 자료들을 이용하는 1점 교정법으로, 계측기 반응상수(Detector Response Factor)를 계산한후 교정되어진 노외계측기의 출력편차를 측정값과 비교하였다. 위의 두가지 방법을 고리 3호기 9주기, 10주기에 적용하여 노심 운전영역(~$\pm$10%)에서 2점 교정법은 최대 1.40 %, 1점 교정법은 최대 0.63 %의 오차를 보여주고 있다. 단순 노외계측기 교정법은 노심출력을 1회 또는 2회 측정하므로 교정시간을 줄이고 제어봉의 사용을 억제하여 방사성 폐기물을 감소시키는 효과와 기존의 교정 방법과 같은 정확성을 기대할수 있다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.178-180
• /
• 2016

TMDE(Test Measurement and Diagnostic Equipment) which is using in the military weapon system should perform the periodic calibration to maintain a measurement reliability during the life cycle, organizations are faced with increasing pressures to minimize costs while improving the reliability of test equipment. Previous studies suggest that reliability models are determined by considering simple size and characteristics of equipment, however an applying single Model may not be fit well maintenance data of many kinds of TMDEs. This paper presents that recommending an optimal calibration interval through the goodness of fit test with verifying statistical significance level among the several intervals which are computed with using major reliability models. According to the result of applying the actual proposed of calibration interval analysis method for various types of equipment, reliabilities are maintained for the end of calibration intervals.

• The korean journal of orthodontics
• /
• v.31 no.4 s.87
• /
• pp.393-401
• /
• 2001

The purposes of this study were to assess the treatment results in orthodontic department, Kyung Hee University, to evaluate the occlusion at 2 year follow-up control, in relation to the original malocclusion, and changes occurring in the follow-up period, and to determine whether treatment and posttreatment changes of the PAR index were related to the original Angle classification Dental study casts of 25 patients in permanent dentition were evaluated using Peer Assessment Rating (PAR) index. The PAR index was measured at the pretreatment stage, immediately after treatment, and at 2 yews posttreatment. The following results were obtained : 1. The treatment reduced the PAR index by 85.05% and it indicates that KHDC clinic has a high standard of treatment 2. The follow-up result of 75.40% PAR score reduction implies a gain of 9.55% of posttreatment PAR score during follow-up period. 3. There is no relationship between the treatment changes of the PAR index and the orignal Angle classification.

• The korean journal of orthodontics
• /
• v.32 no.2 s.91
• /
• pp.71-78
• /
• 2002

It could be suggested that adult orthodontic patients may have peculiar psychological features as well as different periodontal tissue conditions compared with adolescent patients. The aims of the present investigation were to explore the relationships between psychological characteristics and treatment compliance of patient to orthodontist and assistants (dental hygienists). Two types of locus of control data (I-score, Internal locus of control score ; E-score, External locus of control score) were obtained for 312 adult patients and 765 adolescents and then analyzed in relation to their sex and treatment compliance. In general, orthodontic patients showed higher I-score trends than ordinary persons and adult patients manifested higher I-score than adolescent patients. Unlike adult patients, female adolescent patients showed higher I-score than male adolescent patients. Adult patients with higher E-score and adolescent patients with higher I-score than their counter-part subgroup were classified into more compliant group. Orthodontist performed more generous decision about patients' compliance than assistants. The results of this study also suggest that psychological survey in orthodontic field could comprise useful diagnostic criteria.

• Journal of Digital Convergence
• /
• v.18 no.4
• /
• pp.309-314
• /
• 2020

Polymethyl methacrylate (PMMA) is concerned with promoting oral infection due to its low antibacterial activity. To overcome this, the nanoparticles of Ag-MSN, nGO, and CNP were mixed with MMA liquid in a weight ratio of 0, 0.25, 0.5, 1.0, 2.0% compared to resin powder using Orthocryl from Dentarum, a calibration resin, and then instructed by the manufacturer. Accordingly, a specimen for calibration was prepared by mixing PMMA: MMA (1.2: 1) ratio, and physical properties of the calibration resin, antifungal experiments, and statistical analysis were performed. As a result of antibacterial experiments, the antibacterial properties of Ag-MSN increased. In nGO, the antibacterial adhesive effect increased hydrophilicity, not a change in surface roughness. The higher the CNP concentration, the higher the antibacterial activity. This suggests its potential usefulness as an antibacterial dental material for orthodontic devices and temporary restorations.

• The korean journal of orthodontics
• /
• v.40 no.3
• /
• pp.167-175
• /
• 2010

Objective: The aim of this study was to validate the Periotest values for the prediction of orthodontic mini-implants' stability. Methods: Sixty orthodontic mini-implants (7.0 mm $\times$ $\emptyset1.45$ mm; ACR, Biomaterials Korea, Seoul, Korea) were inserted into the buccal alveolar bone of 5 twelve month-old beagle dogs. Insertion torque (IT) and Periotest values (PTV) were measured at the installation procedure, and removal torque (RT) and PTV were recorded after 12 weeks of orthodontic loading. To correlate PTV with variables, the cortical bone thickness (mm) and bone mineral density (BMD) within the cortical bone and total bone area were calculated with the help of CT scanning. Results: The BMD and cortical bone thickness in mandibular alveolus were significantly higher than those of the maxilla (p < 0.05). The PTV values ranged from -3.2 to 4.8 for 12 weeks of loading showing clinically stable mini-implants. PTV at insertion was significantly correlated with IT (-0.51), bone density (-0.48), cortical bone thickness (-0.42) (p < 0.05) in the mandible, but showed no correlation in the maxilla. PTV before removal was significantly correlated with RT (-0.66) (p < 0.01) in the mandible. Conclusions: These results show that the periotest is a useful method for the evaluation of mini-implant stability, but it can only be applied to limited areas with thick cortical and high density bone such as the mandible.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.10
• /
• pp.952-958
• /
• 2011

On-board IR calibration device has been developed for calibration of spaceborne image sensor. It is composed of a blackbody to provide two different radiance temperatures, tilt mirror with a function of stow and deploy to view the blackbody during the calibration and on-board calibration control unit to control the function of the blackbody and tilt mirror. In this paper, to guarantee the structural safety of the unit, the structural and thermal analysis including a thermo-elastic analysis for verifying structural safety on the soldered part of chips have been performed. In addition, safety margin of the chips on the PCB obtained from the conventional analytical method has been compared to the results from the FEM analysis.

• Proceedings of the Korea Contents Association Conference
• /
• 2010.05a
• /
• pp.299-301
• /
• 2010

본 연구의 목적은 가정폭력 문제를 사회적 문제로 인식하고 근본적인 원인을 찾아 합리적인 해결책을 마련 하기위해 한국가정폭력 실태의 심각함과 행위자에 대한 치료프로그램의 필요성을 강조하면서 동시에 한국 가정폭력 가해자 교정상담 프로그램에 대한 만족도에 대한 연구이다. 본 연구를 통하여 가해자 교정상담 프로그램에 대한 불만족 요인을 발견하고 교정상담 프로그램에 적합한 내용을 구성하도록 유도함으로, 교정상담 프로그램을 활용하는 자들의 사용만족도 제고에 기여할 것으로 판단된다.

• Journal of Convergence for Information Technology
• /
• v.10 no.5
• /
• pp.150-156
• /
• 2020

The purpose of this study was to evaluate the factors affecting self - esteem of orthodontic patients. The factors affecting the self - esteem of the orthodontic patients were monthly incomes, and the factors influencing the necessity of orthodontic treatment were the highest at 20-25 years of age. The factors affecting the self - esteem of the orthodontic patients were the order of correction (β= 0.186), dental treatment satisfaction (β= 0.236), interpersonal relationship (β= 0.407), and the explanatory power of the model was 27.6%. Based on these results, it is necessary to continuously study the psychological characteristics to improve the recognition of the need for correction of orthodontic patients, the satisfaction of dental treatment, and the interpersonal relationship.