• Korean Journal of Childcare and Education
• /
• v.7 no.3
• /
• pp.189-209
• /
• 2011

The purpose of this study is to offer a basic material for developing a supervision program of a child-care center and to improve quality in the field of the child-care center by researching child-care teachers' perception & real condition and problems on the development and its improvement, necessity, demand about the scholarship program. An object of this study was randomly selected 230 staffs working for the child-care center located in Busan metropolitan and Kyoungnam province. A methodology of this study is using a questionnaire made by writer with referring to the preliminary study which is associated with a supervision program of child-care center in order to research child-care teachers' perception and demands on the development of a supervision program. The collected material was analyzed by a PASW 18.0 statistics program. The result of this study is that firstly, a perception of the supervision program was shown "know somewhat" the highest and as a result of researching the real condition of training and follow-up course for child-care teachers, "never educated" was the highest. Secondly, as a result of researching a perception of the problem on the development of supervision program, "unreflected-in-sound" was the highest. Thirdly, as a result of researching the differences of necessity on the development of a scholarship program for a child-care center according to some factors, there existed meaningful differences statistically in terms of the class size, but there existed no difference in terms of the type of organization, institution type, academic background.

• Transactions of the KSME C: Technology and Education
• /
• v.3 no.1
• /
• pp.23-28
• /
• 2015

In this paper, we performed the design optimization dual-shell and tube heat exchanger on exhaust waste heat recovery for gas heat pump using CFD and RSM. CFD analysis is useful to design the complex structure such as double shell and tube heat exchanger. By computer simulation, engineers can assess the feasibility of the given design factors and change them to get a better design. But if one wishes to perform complex analysis on the simulation, such dual-shell and tube heat exchanger for GHP, the computational time can become overwhelming. CFD is powerful but it takes a lot of time for complex structure. Therefore, the CFD analysis is minimized by the optimization using the RSM method. As a result, the number of baffle and tube are optimized by 6 baffles and 25 tubes for heat transfer and flow friction. And then pressure drop and heat transfer is improved about 12.2%. We confirm the design optimization using CFD and RSM is useful on complex structure of heat exchanger.

• Journal of Climate Change Research
• /
• v.1 no.2
• /
• pp.179-188
• /
• 2010

To cope with various issues in the aspect of climate change adaptation of UNFCCC, Korea began preparing a Five-year National Climate Change Adaptation Plan in 2010 to be implemented from 2011~2015, for the purposes of securing a concrete system to adapt to climate change. Compared with the policies and measurement tools of developed countries, Korea's climate change adaptation capabilities suffers from a number of limitations including insufficiencies of basic information, human resources for research on climate change, and technology in risk and vulnerability assessment. At the same time, Korea maintains superior information technology systems, and comparatively strong climate change adaptation technologies. Recently, with the establishment of the Korea Adaptation Center for Climate Change as a specialized research organization in climate change adaptation, Korea has upgraded its ability to adapt to climate change and to provide support to other Asian countries which are vulnerable to climate change. In consideration of the close relation between climate change adaptation policy and technology development with the environmental industry, Korea's pursuit of cooperation and technical support for developing countries in the Asia region can be seen as the commencement of a long term investment for the nation's future. International cooperation on climate change adaptation between countries in the region can build a mutually complementary and integrated partnership in business, research, education, and other areas. Furthermore, Korea can also participate in the exploration of common issues as landmark projects that can attract global interest with developing countries.

• The Korean Journal of Archival Studies
• /
• no.34
• /
• pp.57-105
• /
• 2012

The CAMS(Central Archives Management System) of NAK(National Archives of Korea) is an important system which receives and manages large amount of electronic records annually from 2015. From the point of view in database design, this paper analyzes the database schema of CAMS and discusses the direction of overall improvement of the CAMS. Firstly this research analyzes the tables for records and folders in the CAMS database which are core tables for the electronic records management. As a result, researchers notice that it is difficult to trust the quality of the records in the CAMS, because two core tables are entirely not normalized and have many columns whose roles are unknown. Secondly, this study suggests directions of normalization for the tables for records and folders in the CAMS database like followings: First, redistributing the columns into proper tables to reduce the duplication. Second, separating the columns about the classification scheme into separate tables. Third, separating the columns about the records types and sorts into separate tables. Lastly, separating metadata information related to the acquisition, takeover and preservation into separate tables. Thirdly, this paper suggests considerations to design and manage the database schema in each phase of archival management. In the ingest phase, the system should be able to process large amount of records as batch jobs in time annually. In the preservation phase, the system should be able to keep the management histories in the CAMS as audit trails including the reclassification, revaluation, and preservation activities related to the records. In the access phase, the descriptive metadata sets for the access should be selected and confirmed in various ways. Lastly, this research also shows the prototype of conceptual database schema for the CAMS which fulfills the metadata standards for records.

• Journal of the HCI Society of Korea
• /
• v.12 no.2
• /
• pp.21-29
• /
• 2017

While the second and the third industrial revolutions made it possible a few standardized designs to be extracted and produced in large quantities, the recent development of the 3D printing technology allowed many individuals to reflect their unique personal characteristics on their creative works and produce them in large quantities-i.e., personally customized designs and mass production of various designs. However, for the customized designs and the mass production of various designs through the 3D printing technology, the individuals should use a 3D modeling software and the supporting features of the software can significantly affect the type and shape of a creative work. In this study, we surveyed the individuals who design the creative works using 3D printers about the type of software that they use and the type of creative works that they design using the software, to propose a possible direction of new software that supports their activities. To do this, we first surveyed sixty members of the OpenCreators, which is the largest 3D printing creator community in South Korea, about the 3D modelling Software that they use for their 3D printing creations, the best 3D modelling software for the 3D printing, and the type of frequently printing creation using the best 3D modelling software. We then analysed the response results. As a result, we found that most of 3D printing creators in South Korea use Rhino and 123D Design. More specifically, the Rhino was being widely used by the people in the 3D printing industry to print prototypes, samples, and mock-ups, while the 123D Design was being mainly used for general purposes such as educational tools, accessories, and home interior accessories. Therefore, we believe it is necessary to develop the software in two separated categories, i.e. for the business, like the Rhino, and for the beginners, and educational and personal purposes, like the 123D Design. Finally, we stressed and proposed the necessity to support individual creators by developing an industry-specific 3D modeling software.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.4
• /
• pp.569-578
• /
• 2004

The purpose of this study was to clarify the palatal arch length, width and height in the primary and permanent dentition. Samples were consisted of normal occlusions both in the primary dentition(50 males and 50 females) and in the permanent dentition(50 males and 50 females). With their upper plaster casts were used and through 3-dimensional laser scanning(3D Scanner, DS4060, LDI, U.S.A.), cloud data, polygonization, section curve and loft surface, fit and horizontal plane were based to measure the palatal arch length, width and height(Surfacer 10.0, Imageware, U.S.A.). T-tests were applied for the statistical analyze of the data. The results were as follows : 1. In the measurement values, the values of the male were higher than those of the female except primary anterior palatal height. There were not only statistically significant differences in anterior palatal width(p<0.05) and posterior palatal width(p<0.01) in primary dentition but palatal width(p<0.05), anterior palatal length(p<0.01), middle and posterior palatal length(p<0.05) in permanent dentition between male and female. 2. In the indices of palate, there were statistically significant differences in height-length index(p<0.05) and width-length index(p<0.01) between male and female in primary dentition. In permanent dentition, there was statistically difference between male and female. 3. In the measurement values, posterior palatal width was increased most greatly. Posterior palatal height, anterior palatal width and anterior palatal length were followed by descending order. On the other hand, anterior palatal height and posterior palatal length were decreased. 4. In the indices of palate, the height-length index, the width-length index and posterior height-width index were increased, but the others were decreased.

• 한국노년학
• /
• v.37 no.2
• /
• pp.461-474
• /
• 2017

The purpose of this study was to develop the caregiver guideline for participation in activities daily living for the elderly with early dementia in home including easily adaptable and professional strategies as early intervetion. The process of this study was 3 stage. First stage, the development of preliminary caregiver guideline as the first stage of this study was to translate to Korean and reclassify the items about caregiver guideline for participation from reports of foreign association or government related dementia, and it consisted of 3 areas, 128 statements for questionnaire for Delphi investigation. Second stage, the guideline was to conduct the content validity, and delete, reclassify, integrate, revise inappropriate items through 2 rounds and 16 Delphi panels. Third stage, the establishment of the final version of caregiver guideline. It consisted of 8 areas: home modification and assistive device, home activities of daily living, health management, communication, psycho-emotional support, leisure activities, social participation, general strategies. All 68 items was arranged in important order. The content validity, stability, agreement index in this study were 0.81, 0.15, 0.79 respectively. When content validity, stability was above 0.49, below 0.5 in Delphi survey with 15 panels, it was not required additional survey. The result of this study meaned that it was not required to additional Delphi survey, and the result was stable and agreeable. This developed guideline was useful and practical to maintain the elderly's with dementia independent and healthy life as education materials for their caregivers, so it will expect to decrease caregiver's burden. Lastly, it stated limitation and suggestion for further study.

• Journal of Hospice and Palliative Care
• /
• v.11 no.1
• /
• pp.42-50
• /
• 2008

Purpose: Undertreatment of canter pain, especially due to the differences in the perception of pain between the patients and caregivers, is a well recognized problem. The purpose of this study were to determine if there exist differences in communication about pain intensity scores between patients and their family caregivers in Korea. Methods: A total of 127 patient-family caregiver dyads who have experienced canter pain participated in this study at a hospital in Seoul for six months. The data were obtained by fare to face interview with a structured questionnaire based on Brief Pain Inventory-Korean version and other previous researches. The clinical information for all patients was compiled by reviewing their medical records. Results: Patients' 'worst-pain for 24-hour' and 'right-now-pain' scores estimated by family caregivers were significantly higher than those by patient themselves. The degree of agreement between patients and family caregivers in the estimate of patients' 'worst-pain for 24-hour' intensity categories was 78.7% for 'severe pain', 40% for 'no pain', 27.5% for 'mild pain' and 22.9% for 'moderate pain'. In case of 'right-now-pain' intensity categories, the agreement was 50% for 'severe pain', 47.2% for mild pain, 46.3% for 'no pain', and 26.3% for 'moderate pain'. Conclusion: This study demonstrates that the degree of agreement between patients and family caregivers in the estimate of patients 'pain intensity categories was less than 50% except for 'severe pain'. The results indicate that Korean family caregivers tend to overestimate the canter pain intensity of their caring patients, especially, when a lancer patient has 'moderate' or 'mild pain'. Health Providers are advised to educate patient-family caregiver dyads to use a pain measurement scale to promote their agreement in pain Intensity stores. Further analyses and studies are needed to identify the factors and differences that influence their communication about pain intensity scores between patients and their family caregivers.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.10
• /
• pp.1558-1566
• /
• 2015

The purpose of this study was to examine dietitians' perception of importance about standards of foodservice management associated with long-term care hospital accreditation. This study was carried out through a postal survey consisting of 500 questionnaires, and 157 returned questionnaires were used in the statistical analysis. The results were summarized as follows. Average scores of perception of importance were 4.54/5 points in foodservice production management domain, 4.56/5 points in foodservice facilities management domain, and 4.70/5 points in foodservice sanitation domain. The average scores of importance of long-term care hospitals without accreditation were significantly (P<0.05) lower than those of hospitals with accreditation in items of 'establishment of ventilation equipment in kitchen', 'establishment of hand-washstand in toilet (warm-water, soap)', 'setup of sterilizing foothold in entrance of kitchen and toilet', 'division and use of knife, chopping board, gloves, and utensils before and after cook', 'establishment of cleaning plan and cyclic practice', and 'recording of receiving diary'. Results indicate that there is a need to supplement a casebook of regulations by suggesting detailed and critical limits in the case of below average points of importance. A manual, including HACCP standards for foodservice management of long-term care hospitals, is needed, along with education and webpage for comparing notes on accreditation of long-term care hospitals.

• Journal of Nutrition and Health
• /
• v.56 no.3
• /
• pp.247-263
• /
• 2023

Purpose: This study was conducted to update the Nutrition Quotient for Adolescents (NQ-A), which is used to assess the overall dietary quality and food behavior among Korean adolescents. Methods: The first 30 candidate items of the measurable eating behavior checklist were obtained based on a previous NQ-A checklist, the results of the seventh Korea National Health and Nutrition Examination Survey data, Korea Youth Risk Behavior Survey data, national nutrition policies and dietary guidelines, and literature reviews. A total of 100 middle and high school students residing in Seoul and Gyeonggi Province participated in a pilot study using the 25-item checklist. Factor analysis and frequency analysis were conducted to determine if the checklist items were organized properly and whether the responses to each item were distributed adequately, respectively. As a result, 22 checklist items were selected for the nationwide survey, which was applied to 1,000 adolescent subjects with stratified sampling from 6 metropolitan cities. The construct validity of the updated NQ-A 2021 was assessed using confirmatory factor analysis. Results: Twenty checklist items were determined for the final NQ-A 2021. The items were composed of three factors: balance (8 items), moderation (9 items), and practice (3 items). The standardized path coefficients were used as the weights of items to determine the nutrition quotients. NQ-A 2021 and 3-factor scores were calculated according to the weights of questionnaire items. The weight for each of the 3 factors was determined as follows: balance, 0.15; moderation, 0.30; and practice, 0.55. Conclusion: The updated NQ-A 2021 is a useful instrument for easily and quickly evaluating the dietary qualities and eating behaviors of Korean adolescents.