• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.2
• /
• pp.267-275
• /
• 2023

As aged infrastructures have been increased, the importance of accurate maintenance costs and proper budget allocation for infrastructure become prominent under limited resources. This study proposed a mapping algorithm between representative defects, repair methods, and the estimated maintenance costs for concrete bridges. In this regard, using BMS (Bridge Management System) data analysis, bridge repair methods were classified and matched with defects according to their locations, types, and sizes. In addition, the maintenance costs were estimated based on the amount of work-load and quantity per unit using CSPR (Cost Standard Production Rate). As a result, the level of accuracy was an average of 85.1 % compared with the actual bill of quantity for Seoul bridge maintenance. The accuracy of maintenance costs is expected to be enhanced by considering the various site conditions such as pier height, extra charge conditions, additional equipment, etc.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.480-493
• /
• 2007

Many railway-advanced countries are using the various types of track to reduce the track maintenance and repair cost according to the improvement of velocity. It spends on much maintenance and repair cost for ballast track due to abrasion of ballast, track irregularity and unisotropical ballast-support stiffness. The ballast track on railway bridge is accelerating the deterioration of ballast according to interaction of railway bridge and track. As continuing the deterioration, it is caused dynamic loads. Due to these effects, it increases negative loads of track and bridge. However, when designing the railway bridge, the effect of ballast track was applicate only dead load, so elastic behavior effect of ballast track is not influenced. Therefore, this paper presumes the stiffness of ballast track on railway bridge considering dynamic behavior of railway bridge, it was evaluated that effect on dynamic behaviors of railway bridge according to ballast track stiffness.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.10
• /
• pp.13-20
• /
• 2016

The computerized management system for bridges is required due to the increased service life and number of bridges. This paper provides information and communication technology (ICT) - based bridge management system (BMS) to enable life cycle management through a comparative study with the development trend and function of domestic and foreign BMSs. BMS developed as an operation system combined an internet and mobile program, and was based on GIS technology and an object-based information management system. BMS supports the establishment of long-term strategies and short-term plans based on predicting the life-cycle performance profile and the necessary budget by object-based informatization for the whole life-cycle information of bridges. Useful knowledge information for supporting decision making was derived from the life-cycle management strategies establishment for approximately 6,000 existing bridges. BMS was developed to be applicable to all nationwide road bridges. In addition, it can be used practically to maintain the performance based on accurate maintenance result management, reducing cost by reasonable budget management, and enhancing the convenience and reliability of field data collection.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.11 no.5
• /
• pp.197-211
• /
• 2007

The deteriorated PSC Beam bridge is necessary improved reinforcement method. In the study, it is proposed the box reinforcing method which could make the stiffness of the PSC Beam bridges increase more stably through the secondary composition effect of open type PSC Beam bridge's girder which is converted into the consolidation box type and the half panel is formed between the lower flange of the PSC Beam about the deteriorated PSC Beam bridge suffering the capacity decline. In case the proposed reinforcement method combine with the existed external prestressed method, the close analysis depending on the time is conducted by the construction stage because of searching the effect of reinforcement quantitatively. The reinforcement method of the box type which is proposed an efficiency improvement in objective in application case, by a reinforcement method after proposing the whole and bend sectional reinforcement method, against a each reinforcement method evaluated the upward camber which it follows in secondary composite effect and a member stress characteristics. Also, the structural safety of PSC Beam bridge is evaluated quantitatively by examining of rating factor through load carrying capacity evaluation.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.11 no.6
• /
• pp.95-102
• /
• 2007

Recently, an improved capacity for RC bridges is required by their deterioration or necessary to carry traffic increase. Strengthening is known as a better way to improve capacity of bridges than reconstructing in terms of economy. The surface bonded method, which is normally used with FRP material, has some advantages related to conveninent application and time-save among other strengthening methods. FRP material is light and has high tensile strength compared to steel. Therefore, this paper presents how structural capacity strengthed with CFRP sheet and Glass fiber-Steel Plate (GSP) is improved.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.4
• /
• pp.64-71
• /
• 2020

In recent years, many infrastructure have been rapidly aging around the world, which grows interest in the maintenance of the infrastructure. Among the social infrastructure, bridge is a very important structure to transport lots of human and various products. The performance evaluation of bridge can be divided into the condition evaluation and safety evaluation, proposed by Korea Infrastructure Safety and Technology Corporation. However, there are no separate criteria for the performance evaluation of three-class bridges. In general, the performance of bridge is dominated by the results of the condition evaluation, which is lower than that of the safety evaluation. Therefore, this study assessed the correlation between the condition evaluation of superstructure and bridge and also between the condition evaluation and the safety and load-carrying capacity of bridge. The results of the study would provide a basic data for the more quantitative and higher relevant performance evaluation of the existing bridges, particularly for three-class bridges.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.6
• /
• pp.751-760
• /
• 2021

Most bridges in Korea are over 20 years old, and many problems linked to their deterioration are being reported. The current practice for bridge inspection mainly depends on expert evaluation, which can be subjective. Recent studies have introduced data-driven methods using building information modeling, which can be more efficient and objective, but these methods require manual procedures that consume time and money. To overcome this, this study developed an image-based automaticbridge component classification network to reduce the time and cost required for converting the visual information of bridges to a digital model. The proposed method comprises two convolutional neural networks. The first network estimates the type of the bridge based on the superstructure, and the second network classifies the bridge components. In avalidation test, the proposed system automatically classified the components of 461 bridge images with 96.6 % of accuracy. The proposed approach is expected to contribute toward current bridge maintenance practice.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.251-251
• /
• 2018

도로설계기준(2012)에 따르면 노면 배수시설은 측구, 집수정, 배수관, 배수구(빗물받이, 맨홀) 등으로 구성되며 중앙분리대 배수에서 구조가 방호벽일 경우 원칙적으로 집수정과 종배수관, 횡배수관을 설치하여 노면수를 배수한다. 최근 기후변화에 따른 국지성 집중호우로 교량 배수시설의 배수능력 부족으로 교량의 노후화, 노면의 체수와 수막현상을 야기한다. 교량 설계 시, 교량의 외관은 점배수에 의한 배수불량으로 막힘부에서의 식물생육, 부식, 배수구의 오염 등으로 심미성에 악영향을 미치고 있다. 따라서 국토교통부 도로 배수시설 설계 및 관리지침에서는 기존의 집수정으로 유도하여 배수하는 점배수 형태에서 우수의 지체시간을 저감하기 위해 배수구로 즉시 배수되어 배수 효율을 증가시켜주는 선배수시설을 권장하고 있다. 그러나 선배수 구조의 일반적인 내용만을 기술하고 있으므로 보다 상세한 설계기준이 필요하다. 또한 국내에서는 교면 배수를 위한 횡배수구의 배수능력에 관한 설계 개념은 미국의 빗물받이 설계 개념을 그대로 적용하고 있어서 교량 배수시설의 배수능력 증대를 위한 수치 및 수리실험에 관한 기술적인 자료가 부족한 실정이다. 따라서 도로의 흐름해석 및 선배수를 위한 측구 횡배수관의 흐름개선에 관한 구체적인 연구가 필요한 실정이다. 본 연구에서는 배수로 전반의 유향 분석 및 횡유입관 유입부에서의 상세한 흐름해석과 통수능력을 분석하기 위해서는 수리실험을 통한 연구가 필요한 실정이다. 그러나 최적 횡배수관의 형상 및 간격 설정에 대한 수리실험의 물리적 및 시간적 한계를 극복하기 위해 Fluent 모형(Ansys Workbench 13.0)을 활용한 수치모의를 수행하여 모형의 적용성을 검토하였다. 다상유동 해석을 위해 VOF(Volume of Fluid)방법을 적용하였고, 수치해석 방법으로는 비정상류, 난류 모형으로는 standard ${\kappa}-{\varepsilon}$모형을 적용했다. 도로 형상에 따른 우수유출량을 비교 분석하기 위하여 횡경사는 2%로 고정하고 종경사를 2%로 선정하여 수치모의를 통한 배수능력을 분석하고 설계에 직접적인 적용성을 검토하였다. 횡배수관의 간격변화 및 배수공의 위치 변화 등에 따른 차집량을 분석하였으며, 개략적인 수리실험 결과와 수치모의의 차집율을 비교 및 분석하여 Fluent 모형의 적용성을 확인하였다. 또한, 횡배수관의 유입부에서의 유속 변화 및 유출부에서의 유속이 모의가 가능하므로 배수시설에서 보다 정확한 흐름 해석이 가능하여 보다 적정한 배수능력 분석이 가능할 것으로 판단된다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.2
• /
• pp.802-809
• /
• 2021

To cope with the increasing maintenance costs due to aging, the maintenance cost was evaluated from the perspective of asset management. The maintenance cost can be predicted based on the condition of the bridge, and the life cycle cost is used as an index. In general, the condition of a bridge has a wide distribution characteristic depending on the deterioration, load, and material characteristics. In this paper, to evaluate the effect of the bridge conditions on the life cycle cost, condition prediction models were constructed considering the service life, deterioration rate, and inspection error, which are the main variables of the bridge condition and life cycle cost calculation. In addition, condition prediction models were constructed based on the distribution of the health index to estimate the upper and lower bounds of the life cycle costs that can occur in individual bridges. Life cycle cost analysis showed that the life cycle cost differed significantly according to the condition of the bridge. Accordingly, research will be needed to increase the reliability of predicting the life cycle cost of individual bridges.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.6
• /
• pp.751-762
• /
• 2022

Welded head studs are mainly used as shear connectors to bond steel girders and concrete slabs in steel-concrete composite bridges. For welded shear connectors, environmental problems include noise and scattering dust which are generated during the removal of damaged or aged slabs. Therefore, it is necessary to develop demountable shear connectors that can easily replace aged concrete slabs for efficient maintenance and thus for better management of environmental problems and life cycle costs. The buried nut method is commonly studied in relation to bolted shear connectors, but this method is not used in civil structures such as bridges due to low rigidity, low shear resistance, and increased initial slip. In this study, in order to mitigate these problems, a demountable bolted shear connector is proposed in which the buried nut is integrated into the stud column and has a tapered shape at the bottom of an enlarged column shank. To verify the performance of the proposed demountable stud bolts in terms of static shear strength and slip displacement, a horizontal shear test was conducted, with the performance outcomes compared to those of conventional welded studs. It was confirmed that the proposed demountable bolted shear connector is capable of excellent shear performance and that it satisfies the slip displacement and ductility design criteria, meaning that it is feasible as a replacement for existing welding studs.