박스형 보강효과를 고려한 개선된 PSC Beam교의 구조 안전성 평가에 관한 연구

A Study on Structural Safety Evaluation of Improved PSC Beam Bridges Considering To-Box Reinforcement Effect

  • 투고 : 2007.06.09
  • 발행 : 2007.09.30

초록

노후화된 PSC Beam 교량은 개선된 보강방안이 필요하다. 본 연구에서는 성능저하가 발생된 노후 PSC Beam 교량을 대상으로 PSC Beam 교량의 보강형을 폐단면 박스형태로 변환하여 이차합성 구조화함으로써, PSC Beam 교량의 강성을 안정적으로 증가시킬 수 있는 박스형 보강방안을 제안하였다. 제안된 보강방안과 기존의 외부프리스트레스 도입공법을 결합하여 보강할 경우, 보강효과를 정량적으로 규명하기 위해 시공단계해석에 따른 시간 의존적 정밀해석을 수행하였다. 성능개선을 위해 제안된 박스형 보강방안 적용 시 보강방법에 따라 전단면 및 휨 보강과 같은 다양한 형태의 보강방안을 제시한 후, 각각의 보강방안에 대해 이차합성 효과에 따른 상향캠버 및 부재응력 특성을 평가하였다. 또한 내하력 평가를 수행하여 내하율을 검토함으로서, 개선된 PSC Beam 교량의 구조 안전성을 정량적으로 평가하였다.

The deteriorated PSC Beam bridge is necessary improved reinforcement method. In the study, it is proposed the box reinforcing method which could make the stiffness of the PSC Beam bridges increase more stably through the secondary composition effect of open type PSC Beam bridge's girder which is converted into the consolidation box type and the half panel is formed between the lower flange of the PSC Beam about the deteriorated PSC Beam bridge suffering the capacity decline. In case the proposed reinforcement method combine with the existed external prestressed method, the close analysis depending on the time is conducted by the construction stage because of searching the effect of reinforcement quantitatively. The reinforcement method of the box type which is proposed an efficiency improvement in objective in application case, by a reinforcement method after proposing the whole and bend sectional reinforcement method, against a each reinforcement method evaluated the upward camber which it follows in secondary composite effect and a member stress characteristics. Also, the structural safety of PSC Beam bridge is evaluated quantitatively by examining of rating factor through load carrying capacity evaluation.

키워드

과제정보

연구 과제 주관 기관 : 충남대학교

참고문헌

  1. 건설교통부, "교량현황조서," 2004.
  2. 건설교통부, "교량구조물의 보수.보강 공법편람," 1995.
  3. 건설교통부제정, "도로교설계기준.해설," 대한토목학회, 2003.
  4. 건설교통부제정, "콘크리트 구조설계기준.해설," 한국콘크리트학회, 2003.
  5. 한만엽, 정문연, "외부강선 보강용 압축형 단부 브래킷의 거동 연구," 대한토목학회 논문집, 제21권, 제 6-A호, 2001.
  6. 방명석, "주형의 박스화에 의한 피시빔교량의 보강방법 및 그에 의한 보강구조를 구비한 피시빔교량," 특허청, 2001.
  7. 조창주, "노후 PSC빔 교량의 이차합성을 고려한 박스형 보강공법의 신뢰성해석," 충남대학교 대학원 공학박사학위논문, 2005.
  8. 홍석주, "외부 프리스트레스 도입에 의한 노후 콘크리트교량의 성능향상에 관한 연구," 충남대학교 대학원공학박사학위논문, 2000.
  9. 한국건설기술연구원, "외부 프리스트레스를 도입하는 구조물의 설계 및 시공에 관한 연구," 1995.
  10. Kiang-Hwee T. and Tjandra, Robert A., "Strengthening of Precast Concrete Bridges by Post-Tensioning for Continuity," PCI Journal, Vol. 48, No. 3, 2003, pp. 56-71.
  11. Ariyawarena, Nihal Don, Ghali, Amin., "Design of Precast Prestressed Concrete Members Using External Prestressing," PCI Journal, Vol. 47, No. 2, 2002, pp. 84-94.
  12. L. Dezi, G. Leoni, A.M. Tarantino, "Algebraic Methods for Creep Analysis of Continuous Composite Beams," Journal of Structural Engineering, Vol. 122, No. 4, 1996, pp. 2358-2365.
  13. Hassan, Tarek, Rizkalla, Sami., "Flexural Strengthen of Prestressed Bridge Slabs with FRP Systems," PCI Journal, Vol. 47, No. 1, 2002, pp. 76-93.
  14. Burke, Chrd R., Dolan, Charles W., "Flexural Design of Prestressed Concrete Beams Using FRP Tendons," PCI Journal, Vol. 46, No. 2, 2001, pp. 76-87.
  15. CEB/FIP Model Code, "Comite Euro-International du Beton," 1990.
  16. A.M. Neville, W.H. Dilger and J.J. Brooks, "Creep of Plain and Structural Concrete," Construction Press, London and New York, 1982, pp. 194-199.
  17. Kiang-Hwee T. and Chee-Khoon Ng, "Effects of Deviator and Tendon Configuration in Behavior of Externally Prestressed Beams," ACI Structural Journal, Vol. 94, Issue 1, 1997.