• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.401-405
• /
• 2003

Sound quality is becoming a major concern in optical disc drives (ODD). In order to improve the sound quality of slim type ODDs, we changed lead screw pitch and firmware algorithm in the seek mode. To evaluate the sound quality, the PCM (Paired Comparison Method) was adopted and the result was compared with the time-averaged loudness spectrum. Sound signals were also recorded and modified by increasing or decreasing selected frequency bands to verify their sensitivities to the sound quality. As a result of jury test, preferred frequency bands are associated with the time-averaged loudness spectrum.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.351-355
• /
• 1996

In optical disc system, lens actuator of 4-wire has unwanted moment which occurs tilt. The moment around the axis pallet to the tangential direction of the disk occurs to the moving part. when the moving part is moved in tracking direction and focus driving force is applied. This paper analyzed coupled effect due to the moment based on structural analysis and magnetic field analysis, both using finite element method.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.1101-1106
• /
• 2003

As the disk in the ODD rotates, disturbances acting on the ODD servo system generally have periodic components. Such disturbances can make the system unstable and make the controller hard to work. The repetitive controller can be the solution of the periodic disturbances by making the periodic control signals. In this paper repetitive controller is proposed that make the control signal follow the periodic disturbances. A low pass filter, which can make the system stable, is proposed by the simple stability conditions. We will show the performance of the repetitive controller in actual commercial system. Simulation and experimental results will be given as the evidences

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.208-213
• /
• 2003

A note-book PC has become thinner in recent years. And optical disc drives are required to have high memory capacity. Therefore, the actuator of optical disc drives must be thinner and have disc tilt compensation function for high density memory. In this paper, the hybrid type actuator is investigated for 3-axis ultra-slim actuator. A 3-axis ultra-slim actuator is designed by using the modal analysis of the actuator and the electromagnetic analysis of magnetic circuit to achieve dynamic characteristics and magnetic flux density for high sensitivity, respectively. Also, magnetic force between tilt magnet and tilt yoke is investigated to find the influence on the DC sensitivity in the focus and track directions.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.412-417
• /
• 2003

As optical disk drives become designed for portable and hostile environment, higher storage density and smaller size, optical disk drives have a possibility to miss the track and not to read the data. This paper presents the modeling of an optical disk drive as 3-DOF system. Optical disk drives are tested with a linear drop test device and their results are compared with simulation results in order to verify the shock analysis. Finally, this paper shows shock response of a optical disk drive with changes of parameters

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.958-961
• /
• 2002

The optical disk drive is a basic option on the PC now. So the lower price and higher read/write speed goods are now on market. These trends make many difficulties to produce more reliable drives, comparing when they are treated as high price stuff. In mechanical terms, the lower price and higher read/write speed drive make higher vibration and noise, lower stiffness, even severe fracture of cheap and low quality disk, problems. Due to the internal crash of P/U inside of the drive, the failure of drives, inferior drives, increase more and more by the careless transportation and the originated low stiffness parts. This report is the introduction of the FE simple model to decrease the internal P/U crash problems, and the results.

• 한국소음진동공학회논문집
• /
• 제12권9호
• /
• pp.661-667
• /
• 2002

With the increase of storage density, high rotational speed and high access technologies in optical disk drive, mechanical issues, mainly noise and vibration, become critical. Up to now the researches of rubber mount for anti-vibration focused on how to calculate the static and the dynamic stiffness of rubber mount and loaned out consideration of the dimensional tolerance of rubber mount for anti-vibration. This paper presents the effects of dimensional tolerance of rubber mount for anti-nitration on the dynamic characteristics of optical disk drive by finite element analysis and dynamic test. The relation between dimensional tolerance and dynamic characteristics of optical disk drive is observed and discussed.

• 한국소음진동공학회논문집
• /
• 제16권5호
• /
• pp.529-536
• /
• 2006

In high-speed optical disk drive, the excitation caused by rotation of a mass-unbalanced disk is a major source of vibration. The vibration can be a disturbance to the servo system, which is sufficient to cause severe failures in the reading and writing process. The vibration also causes users to feel unpleasantness. The vibration reduction is therefore essential for the reliable operation of optical disk drive. One of the approaches to reduce the vibration is a dynamic vibration absorber(DVA). In this paper, we analyze the dynamic behavior of $DVD{\pm}RW$ combo drive system with DVA through 12-dof rigid multi-body dynamic model. The effective location and the optimal frequency ratio for the DVA are obtained from the analysis. The DVA are fabricated based on the analysis and its usefulness is confirmed.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.150-155
• /
• 2004

The base material of optical disc is the amorphous polymer, polycarbonate. So crack growth on the rotating optical disc could happen by the static centrifugal force. This phenomenon is called static fatigue. Today's CD-R disc drive is being operated over 10,000 RPM. This is increasing the possibility of the disc fracture when operating. In this reason, new method to measure the static fatigue threshold quality and the way to calculate the threshold J-integral value and the safe crack length of the optical disc are studied. Finally the environmental effect to optical disc is also studied in this paper.

• 한국공작기계학회논문집
• /
• 제16권6호
• /
• pp.103-109
• /
• 2007

With the increase of track density, high rotational speed and the compatibility for various media in optical disk drives, the effective design to vibration reduction is very important for robust operation. Especially when a slim optical disk drive for a notebook PC is excited by a mass-unbalanced disk, internal vibration and its transmission to external case bring about severer problem than that of conventional one. In this paper a design process of a rubber mount in a slim optical disk drive for vibration reduction is presented. The characteristics of rubbery materials - hyper-elastic and visco-elastic - are measured with standard specimens. The static stiffness of a rubber mount was calculated by FEM and the dynamic stiffness is predicted with the static stiffness and the impedance test data of the standard specimen. The transmissibility tests are performed for the purpose of verification of the design process.