• 한국공간정보시스템학회:학술대회논문집
• /
• 2007.06a
• /
• pp.268-272
• /
• 2007

현재 시행되고 있는 하천정비와 하도정비는 하천 흐름의 특성을 간과한 채 일괄적으로 진행되어 왔으며 그 결과로 하천의 인공화는 지금까지 계속되고 있다. 이에 따라 하천 및 하도의 물리, 화학, 생물에 미치는 영향은 심각하며, 그 동안 인위적인 하천교란의 요인과 하천교란에 따른 영향, 즉 하상변동, 외래종 식생 침입, 생태서식처 변화 등의 정량적 평가 기술의 수립은 매우 미흡한 상태이다. 뿐만 아니라 하천 교란 극복을 위한 저감기술, 복원기술 및 적응관리 기술 또한 체계적으로 정리되지 못하여 하천과 댐 관리당국이 어려움을 겪고 있다. 이러한 상황을 극복하기 위해서는 하천 교란에 대항하는 회복관리 기술 개발을 위한 교란 평가 기술이 필요하다. 따라서 본 연구에서는 항공사진 및 GIS기법을 이용하여 국내 주요하천의 원인별 교란실태를 조사하고 분석함으로써 하천교란 조사기술 개발에 응용할 수 있는 방안을 제시하고자 하였다. 분석을 위하여 댐 하류의 하천교란 및 적응현장 시범지역을 선정한 후 대상 지역의 항공사진을 GIS화하여 하천 교란 실태를 분석하는 데에 필요한 자료를 생성하였으며 생성된 자료를 바탕으로 하천의 평면 및 단면의 변화특성을 조사할 수 있었다. 또한 경년별 저수로 형태와 하천 중심선 비교 분석을 통하여 저수로의 이동 및 변화 양상을 규명해 낼 수 있었으며 그 결과 댐 하류지역에서 하도안정문제가 발생하였음을 확인할 수 있었다. 본 연구 결과를 바탕으로 보다 효율적인 하도안정문제에 관한 대책수립이 가능하리라 보며, 이를 위해서는 하천 교란 조사기술 개발에 대한 연구가 뒤따라야 할 것이다.과적임을 알 수 있었다. 실험 결과 본 기법으로 유휴시간에 프로세서를 저전력모드로 바꾸는 기존의 고전적인 전력 관리 기법보다 전체 시스템 전력 소모를 9% 더 절약할 수 있었다. 위성영상과 DEM 개발기술이 87% 이상의 점수를 받아 가장 시장성 및 활용성이 높은 기술로 평가되었으며, 초다분광영상에 대한 기술은 70%를 겨우 넘는 수준에서 평가가 되었다. 멀티센서 공간영상정보 통합처리 기술 개발은 다목적 실용위성의 보유, 국가 NGIS 사업의 결과물이 상당히 축척이 되어 있고, 라이다(LiDAR) 기술의 도입을 위한 환경이 조성되었기에 다른 국가에 비해 멀티센서 기술의 적용과 산업화가 가시화 될 수 있을 것으로 기대된다. 그러나 멀티센서 자료의 수급이 용이하지 못하고, 법 제도적인 한계, 시장의 성숙도가 기대이하라는 점 등의 한계를 노정하고 있다.a var. sieboldii 3. Pinus densiflora, Q. aliena, Q. acutissima, P. thunbergii, Q. acuta 4. Carpinus laxiflora, Camellia japonicas. C. tschonoskii community의 5개 그룹으로 나타났다. 하류의 부착돌말류는 상대적으로 양호한 수질을 가지고 있는 정점 1에서 다양한 생물상을, 탄천의 영향을 받는 정점 2는 상대적으로 수질이 악화되어 호오염성 종들이 높은 분포를 나타내고 있었다. 또한 부착돌말류 중 Cymbella minuta는 다른 부착돌말류에 비해 강한 오염지표성을 나타내고 있었다.p=0.000, $4.76{\pm}3.31$

• Journal of Bio-Environment Control
• /
• v.8 no.3
• /
• pp.192-201
• /
• 1999

This study was aimed to introduce the measurement of $CO_2$ concentration and leaf area index in the phytotron for predicting the effect of CO.E, light and leaf area index on the instantaneous photosynthetic rate of sweet pepper with the existing ASKAM model. Measurements were made in 2 semi-closed phytotron compartments in which three different $CO_2$ concentrations were applied at random. Plants were grown on containers with circulating nutrient solution at 21$^{\circ}C$ and 80-95% relative humidity. The model estimates crop net $CO_2$ uptake for short time intervals during the day based on short-term data of daily radiation, temperature and $CO_2$ concentration. During the photosynthesis measurements, $CO_2$ concentrations in both compartments and in the basement were measured every minute. This was also done for the flow of pure $CO_2$ into the compartment, global radiation, photosynthetic active radiation inside the compartment, temperature and relative humidity. Crop growth models summarize our knowledge on crop behavior and have as such a wide range of applications in analysis, crop management and thus as a farm management tool.

• Archives of design research
• /
• v.16 no.4
• /
• pp.243-254
• /
• 2003

The aim of this study is to analyze the skylights and roof structures designed by Marie Botta from the viewpoint of the space, the form and the light source, and thus to find out their characteristics. For this purpose, his 13 major works were selected and analyzed according to the principle of design, which could explain the characteristics of skylight and roof structures sufficiently. Trough this study, the followings are realized. 1) The skylights are the main light source in the interiors of his buildings that are comparatively dark, being enclosed by thick materials such as bricks. The roof structures have been precisely designed to disperse the light effectively 2) The skylight and roof structures play the role of form-creating elements in his buildings. They create the unique images for the exteriors and endow form to the interiors. 3) The skylight also serves as a window to communicate with nature outside. Through the skylight, people in his buildings are able to perceive the flow of time and enjoy the scenery of the sky. 4) The light that showers through the skylight and adjusted by roof structures produces special atmosphere in his projects. In his interiors, people can experience a somewhat miraculous and sacred feeling with the light from above. 5) The skylight has meaning as a symbol. It symbolize the relationship between the earth and the sky. Also, in religious projects, a skylight provides a symbolic vision of Heaven for Christians. Comparing with recent works presented in our country, which emphasize simple interiors using artificial light, Botta's works suggest another form of design differentiated from the works of our designers in that Botta's works not only take advantage of natural light by using skylights and roof structures but also utilize them as form-creating elements.

• Journal of Bio-Environment Control
• /
• v.5 no.2
• /
• pp.160-166
• /
• 1996

Objective of this study was to investigate the effects of all current speed on the microclimates above and inside the plug stand under artificial light. Maximum air temperature appeared near the top of the plug stand. Difference in air temperature inside the plug stand increased with the decreasing air current speed. Difference in relative humidity(DRH) to the relative humidity at the Inlet of the main air flow conditioner Inside and above the plug stand decreased with the increasing air current speed. Relative humidity inside the plug stand was 10-15% higher than that above the plug stand. DRH inside a stand of plug at air current speed of 0.3m s$^{-1}$ was about two times as many as that at air current speed of 0.9 m s$^{-1}$ . DRH inside the plug stand was 2.8-6.5% higher at LAI of 2.6 than that at LAI of 0.5. Gradient for the vapour pressure deficit was distinctly appeared at the low air current speed. Direction of vapour pressure flux is from the medium surface upwards. Difference in vapour pressure(DVPD) to the vapour pressure deficit at the inlet of the main air flow conditioner inside and above the plug stand decreased with the increasing height above the medium surface. DVPD inside the plug stand was 0.3-0.4㎪ higher at air current speed of 0.9m s$^{-1}$ than that at air current speed of 0.3m s$^{-1}$ . Results for the effects of air current speed on the relative humidity and vapour pressure deficit indicated that the microclimates above and inside the plug stand at the rear region in plug trays were slightly unfavorable compared to those at middle region.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.54-54
• /
• 2012

전통 날염방식(Silk Screen)과 디지털날염(Digital Textile Printing)을 비교해보면, 디지털날염은 디자인에서부터 날염까지의 전공정을 완전히 디지털화함으로서 다양하게 디자인할 수 있고 미묘한 색감의 흐름을 표현할 수 있어서 자연스러운 이미지의 표현이 가능하다. 그러나 현재 디지털날염을 피혁이나 직물에 적용하기에는 프린팅속도가 느려서 생산성이 낮고 이미지 내구성(세탁, 승화, 일광, 및 마찰견뢰도)이 낮은 등 많은 단점을 가지고 있다. 또한 신발산업은 현재 중국이나 동남아시아 등 개발도상국의 등장으로 수출의 국제적 경쟁시대에 접어들면서 대량생산이나 획일적인 디자인으로부터 벗어나 고부가가치 상품을 생산해야하는 과제를 안게 되었다. 한편 가죽에 응용가능한 잉크는 크게 수성, 유성, 용제형과 자외선 경화형의 잉크가 있으며 자외선 경화형 잉크는 자외선을 이용하여 기존의 잉크의 단점을 보완한 것이다. 자외선 경화형 잉크는 자외선 램프를 열원으로 하여 이온 또는 라디칼 중합, 광중합을 하며, 에너지 소비가 적어 경제적이며 시스템 가동시 비활성 기체가 필요하지 않다. 또한 자외선 경화형 기술은 상온에서 이용할 수 있으며 잉크의 경우 건조하는 데 걸리는 시간이 필요하지 않다. 또한 시스템을 가동 시키거나 중지 시키는 것이 쉬우며 고속으로 연속적인 일을 처리할 수 있다. 프린터의 크기가 작아 공간 효율이 유리하며 용제나 $CO_2$가 발생하지 않아 친환경적인 기술이라 할 수 있다. 따라서 본 연구에서는 자외선 경화형 시스템을 잉크에 적용하여 피혁 표면에 프린팅한 다음 그 견뢰도를 측정함으로써 그 효과를 알아보았다. 세탁에 의한 Matlab 측정값으로부터 용제형 잉크의 경우는 세탁 전, 후 line width가 큰 차이를 보이나 자외선 경화형 잉크의 경우는 그 차이가 적음으로부터 자외선 경화형 잉크가 용제형에 비해 색상 탈리가 적었음을 말한다. 또한 raggedness값 역시 마찬가지 결과를 보여 안료 색소와 피혁의 접착성이 향상된 것을 알 수 있다. SEM을 이용한 피혁의 표면과 단면 사진을 보면 용제형보다 자외선 경화형 잉크를 사용한 피혁이 좀 더 매끈한 표면을 보이는데 이것은 접착기능을 하는 아크릴레이트에 의해 균일한 날염이 가능하기 때문이라 고 생각된다. 이상의 결과로부터 자외선 경화형 잉크가 세탁, 마찰, 일광 견뢰도가 우수함을 알 수 있었으며 기존의 용제형 잉크를 대체할 수 있는 좋은 재료라고 생각된다.

• Journal of Korea Water Resources Association
• /
• v.48 no.8
• /
• pp.659-672
• /
• 2015

In flow velocity measurement of natural rivers, taking images with proper image quality is the fundamental and the most important step. Since flood peaks generally occur in night time, it is very difficult to capture proper images in that time. The present study aims to test a far infra-red camera as a adequate alternative to resolve the various problems in measuring flood discharges. The far infra-red cameras are able to capture images in night time without help of any extra illuminations. Futhermore they are not affected by fog nor smoke, hence they can be adapted for a fixed-type surface image velocimeters. For comparison, a commercial camcorder and a near infra-red cameras were used together. The test images were taken at a day time and a night time, and the image acquisition work were performed at an artificial flow channel of the Andong River Experiment Station. The analyzed results showed that the far infra-red camera would be a good instrument for surface image velocimeters, since they were able to capture regardless light condition. There are, however, a few minor problems in their accuracy of the analyzed results. About their accuracy a more study would be required.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.10 no.5
• /
• pp.117-124
• /
• 2010

Most of the rivers which exist in nature are not a single river but the network that is composed of several branches and mainstreams. The river network are more complicated than other sigle rivers and streams. Therefore the hydraulic characteristics are sensitively changed by reduction and expansion of the width in the confluence or the variation of the flux. In this paper, the hydraulic characteristics were calculated by the change of the width and length in the confluence and the hydraulic model test. The deposit of confluence emerged at the left bank, right bank and the stagnation sector. As the total flow in the branch have increased, stagnation of the left bank and right bank have decreased. When the width of the downstream have been get smaller from 3 m to 2 m, the deposit of the left bank and right bank and stagnation sector have decreased. But as the eddy flow in the center of the confluence is occurred, the erosion has been increased. The result of this paper can be used as a basic data of water management around the junction and for maintenance on the ground of development of the river.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.6
• /
• pp.1-11
• /
• 2000

In this paper, we propose a novel control signaling protocol that efficiently controls connection setup and increases the utilization of network resources. The proposed protocol, Separated Control Signaling Protocol(SCSP), separates bearer control from call control lot WDM optical networks. The main function of call control is to check the availability of network resources such as wavelengths and receivers at destination node. Bearer control is to reserve and assign wavelengths. The signaling architecture of this protocol consists of call controller and hearer controller The call controller handles call setup and release, activates the beater controller, and manages the status of call and bearer. The bearer controller reserves wavelengths, sets up bearer, tears down bearer. and notifies the status of beater to call controller. The state transition diagrams of each controller are designed. Using control messages and related primitives, the information flows for call setup and bearer setup, hearer teardown and call release, and reaction for setup failures are described to evaluate the performance. The simulation results show that the separated control signaling protocol is superior to conventional one in terms of call blocking probability and resource utilization.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.7
• /
• pp.579-589
• /
• 2015

This study aims to understand the internal flow and the evaporation characteristics of a deionized water droplet subjected to vertical forced vibrations. To predict and evaluate its resonance frequency, the theories of Lamb, Strani, and Sabetta have been applied. To visualize the precise mode, shape, and internal flow inside a droplet, the experiment utilizes a combination of a high-speed camera, macro lens, and continuous laser. As a result, a water droplet on a hydrophobic surface has its typical shape at each mode, and complicated vortices are observed inside the droplet. In particular, large symmetrical flow streams are generated along the vertical axis at each mode, with a large circulating movement from the bottom to the top and then to the triple contact line along the droplet surface. In addition, a bifurcation-shaped flow pattern is formed at modes 2 and 4, whereas a large ellipsoid-shape flow pattern forms at modes 6 and 8. Mode 4 has the fastest internal flow speed and evaporation rate, followed by modes 8 then 6, with 2 having the slowest of these properties. Each mode has the fastest evaporation rate amongst its neighboring frequencies. Finally, the droplet evaporation under vertical vibration would lead to more rapid evaporation, particularly for mode 4.

• Journal of Korean Society of Water and Wastewater
• /
• v.27 no.6
• /
• pp.827-836
• /
• 2013

Due to the stringent drinking water quality, formaldehyde will be included in Korean drinking water standard from year 2014. However, its standard analytical method has not yet been established. This study compares two analytical methods, DNPH-LC and ACFAS with respect to their analysis principles, Method Detection Limit (MDL), Limit Of Quantitation(LOQ), precision, accuracy, reproducibility, convenience, number of samples analyzed per hour and analysis cost. These methods measure absorption intensity at 360 nm by using HPLC after DNPH-derivatization (DNPH-LC) and at 410 nm by using Automated Continuous Flow Absorption Spectrophotometer (ACFAS), respectively. Reproducibility was tested by repeating the analysis 7 times using a standard solution for each method. For DNPH-LC method, MDL was $0.5{\mu}g/L$, LOQ was $1.58{\mu}g/L$ with standard deviation of $0.16{\mu}g/L$. For ACFAS method, they were $0.27{\mu}g/L$, $0.85{\mu}g/L$L with standard deviation of $0.09{\mu}g/L$, respectively. Both methods satisfied the requirement set by the Korean drinking water quality standard. Complexity of sample pretreatment procedure for DNPH-LC method may cause large error and, consequently, the analytical result will depend on the level of skill of analyst. In contrast, ACFAS method which used only one reagent equipped with an automated injection device showed little analytical error. It costs about $5.00 and $1.00 for one sample to analyze by the DNPH-LC method and the ACFAS method, respectively. Compared to the DNPH-LC method, ACFAS method provided more reliable analytical results. In terms of convenience, easiness and analytical cost, ACFAS method was demonstrated to be superior to the DNPH-LC method. The results of this study suggested that the ACFAS method could be adapted as a proper method for determining formaldehyde content in drinking water.