• Proceedings of the Optical Society of Korea Conference
• /
• 2009.10a
• /
• pp.303-304
• /
• 2009

• Environmental engineer
• /
• s.176
• /
• pp.58-63
• /
• 2001

여러 환경정화 방법들 중 광촉매를 이용한 처리기술들이 관심을 모으고 있다. 광에 의해 활성을 갖는 여러 촉매들 가운데 이산화티타늄($TiO_2$)을 중심으로 한 연구가 가장 활발히 진행되고 있다. 본 연구는 TiO2를 개질화하여 광활성이 우수한 광촉매를 개발하고 이를 이용한 VOC 처리를 목적으로 하고 있다. VOC 중 할로겐화(halogenated)된 것들의 처리는 매우 어려우며 현재의 소각방식으로는 효과적으로 처리되고 있지 않다.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2005.05a
• /
• pp.281-283
• /
• 2005

TiO$_{2}$ 광촉매 구조 변환에 따른 실험을 행하기 위해 sol-gel 법으로 17%, 59%, 91% rutile과 pure anatase를 제조하였다. Rutile의 비율이 증가할수록 비표면적은 감소하였고, 입자크기는 증가하였다. Pure anatase 보다 rutile이 포함된 TiO$_{2}$ 광촉매가 가시광영역에서 흡수률이 더 뛰어났으며 분해효율도 좋은 것으로 나타났다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.227.1-227.1
• /
• 2010

본 연구는 자외선 영역의 흡수로 전자 정공의 전하쌍을 생성함으로써 광전압 및 전류를 일으키는 티타니아 물질을 금속지지체 표면에 양극산화로 튜브형 $TiO_2$(anodized tubular $TiO_2$; ATT)로 제조한 후 나노크기의 금속 혹은 $WO_3$입자를 담지하여 광감응 재료로 활용하였다. 이는 기존의 입자나 콜로이드 형태로 광촉매 물질을 고정화하여 사용한 재료의 탈리현상 및 효율저하를 극복하기 위함이다. ATT는 전해질 내에 전기화학적 에칭율과 화학적 용해율의 비율에 의해 나노튜브 길이 성장에 영향을 미치는데 이를 유기 전해질과 불산 전해질을 사용하여 정전압 혹은 정전류의 조건에서 다양한 길이의 $TiO_2$ 나노튜브를 제조하였다. 여기에 전기분해담지(electrolytic deposition; ELD)를 통하여 정전류 조건에서 다양한 금속(Pt, Pd, Ru)을 나노크기의 형태로 담지하여 광촉매 내 생성된 전자 정공의 재결합을 줄이고자 하였고 $WO_3$의 담지를 통하여 가시광 감응을 높이고자 하였다. 제조된 여러 조건의 시료는 SEM과 EDAX를 통하여 형태와 길이, 담지량을 확인 하고 XRD를 이용하여 열처리 온도에 따른 결정화상태를 확인하였으며 광전류 측정 및 Cr(VI)의 광환원과 MB의 광분해를 통하여 광효율을 관찰하였다. 금속이 도핑되었을 경우 순수 ATT보다 보통 3배의 흡착률과 UV광원 아래 2배의 광효율을 관찰할 수 있었는데 이 중 Pt의 담지가 가장 효율이 좋았으며 흡착률에서는 담지량의 증가에 따른 증가선을 관찰 할 수 있었으나 광원 사용시 3%담지율에서 최적을 확인 할 수 있었다. 또한 $TiO_2$외 가시광감응 활성을 높이기 위한 다양한 광촉매제조가 진행 중에 있다.

• Korean Journal of Microbiology
• /
• v.32 no.3
• /
• pp.202-207
• /
• 1994

A mutant strain PRM1 defective in light-activated heterotrophic growth was isolated from Synechocystis sp. PCC 6803. PRM1 could be grown at growth rate equivalent to Synechocystis 6803 under mixotrophic growth conditions. However, PRM1 could not be grown under light-activated heterotrophic conditions, in which a daily pulse of light for 5 min was given. These results suggest that PRM1 is not defective in heterotrophic metabolism, but in the transduction pathway of light signal essential to the growth. Plasmid patterns, absorption spectra of whole cells, and the exterior and interior structures of PRM1 were similar to those of Synechocystis 6803, except that PRM1 could not produce amorphous slime holding cells together.

• The Korean Journal of Pesticide Science
• /
• v.11 no.1
• /
• pp.52-58
• /
• 2007

ALA (5-aminolevulinic acid) has been proposed as a tetrapyrrole-dependent photodynamic herbicide and insecticide by the action of the protoporphyrinogen IX oxidase (Protox IX). The present study was conducted to determine growth responses of plant and insects to ALA, biodegradable biopesticidal substance. In the paddy condition experiment, plant height and shoot fresh weight of barnyardgrass (Echinochloa crus-galli) was more reduced by ALA than rice plants, even though both plant species show great phytotoxicity. Hairy crabgrass (Digitaria sanguinalis), a monocot weed, was more sensitive to ALA at 5mM under upland condition when ALA applied on the foliage, compared with soybean (Glycine max) as a dicot crop. ALA solutions were tested for their insecticidal and larvicidal activities against Spodaptera exigua (Hubner) and Tetranychus urticae Koch. by foliar application and leaf-dipping method. The result showed higher insecticidal activity of ALA at 10mM and its mixture with insecticide luferon against S. exigua. Strongest insecticidal activity against T. urticae was observed from the ALA solution at 10mM 72 days after application. This results show that ALA solution had potent herbicidal and insecticidal activities against agricultural pests even though their activities were lower than those of synthetic pesticides.

• Journal of Korean society of Dental Hygiene
• /
• v.14 no.4
• /
• pp.585-591
• /
• 2014

Objectives : The purpose of this study was to investigate of the color change, tooth surface and intra-pulpal temperature of tooth bleaching by light activation Methods : Forty-eight extracted bovine teeth were immersed into a tea solution for 24 hours. The specimens were randomly divided into four groups(n=15):(G1) 15% HP + without light activation, (G2) 15% HP + light activation, (G3) 25% HP + without light activation, (G4) 25% HP + light activation. All specimens were bleached for 15 minutes three times. The spectrophotometer (CM-2600d, Konica Minolta, Osaka, Japan) was used including before bleaching, immediately after bleaching, 1 week, 1 and 3 months after the end of bleaching. The temperature rise were measured in the pulpal chamber and tooth surface with a digital thermocouple thermometer(Termopar Digital Multimeter, Tektronix DMM916, USA). Between the tested time points, the specimens were stored in distilled water. The data were analyzed by ANOVA, t-test and Tukey's post hoc test set at 0.05. Results : There was no significant color change by the use of light after the bleaching treatment(p>0.05). The dental bleaching treatments of teeth with 15% HP and 25% HP did not seem to be more effective when light source was used. There was no difference in color stability between groups within three month(p>0.05). There was an increase in tooth surface and pulp temperature, but it was not sufficient to cause damage to the pulp. Conclusions :The use of light activation has no obvious effective impact on the tooth bleaching effect.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.1
• /
• pp.59-66
• /
• 2005

[ $TiO_2$ ] was deposited by DC magnetron sputtering on glass surface under various sputtering parameters such as discharge power($0.6{\sim}5.2\;kW$, substrate temperature($R.T{\sim}350^{\circ}C$), Ar and $O_2$ flow ratio with $0{\sim}50\;sccm$($Ar+O_2$ 90 sccm) and about 1 mtorr of pressure. TiO-N thin film was prepared under same sputtering conditions for $TiO_2$ thin film except flow ratio($Ar+O_2+N_2$ 90 sccm). The sheet resistance of thin films deposited under these parameters was measured to analyze electronic characteristic and thin film's thickness(${\alpha}$-step), surface roughness(AFM) and formation construction(FE-SEM, XRD) were also measured to draw optimal sputtering parameters. In order to evaluate photo-activity of thin film($TiO_2$, TiO-N) made in optimal parameters for removal of pollutants, toluene among VOCs and Suncion Yellow among reactive dyes were chosen to probe organic compounds for photo-degradation. It was shown that the photo-catalytic thin films had a significant photo-activation for the chosen contaminants and especially TiO-N thin film showed maximum efficiency of 33% for toluene(5 ppm) removal in visible-light range.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.1
• /
• pp.63-71
• /
• 2012

As nanotechnology is a key industry, there is growing concern relating to the potential risk of nanoparticles. They are known to be released into the environment via various exposure routes. When nanoparticles are present in water environments, they are supposed to be illuminated by ultraviolet light, and the ecotoxicity of photoactive nanoparticles may be changed. In this study, a review of the ecotoxicity of photoactive nanoparticles, including the mechanisms of phototoxicity, are presented. In order to address this issue, studies on the ecotoxicity to soil and water organisms exposed to photoactive nanoparticles were investigated. The photoactive nanoparticles chosen for this study were zinc oxide, titanium dioxide and fullerene. Microorganisms, nematode, earthworm, algae and fish, etc., were chosen to assess the toxicity of nanoparticles using diverse methods. However, studies on the phototoxicity potentially induced by nanoparticles on UV illumination have been reviewed in only 8 studies. From a few studies, photoactive nanoparticles have shown high dissolution rates under UV conditions, with the released ions observed to profoundly influence test organisms. In addition, NPs exposed to UV produced reactive oxygen species (ROS). These ROS can induce oxidative stress in exposed organisms. Evidence of phototoxicity by nanoparticles were found based on previous studies.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.454-454
• /
• 2013

태양전지는 화석연료의 고갈로 인해 새로운 대체 에너지원으로 관심을 받고 있다. 유기태양전지는 무기물 태양전지와 비교하여 제작 단가가 낮은 경제성과 다양한 기판을 사용할 수 있는 다양한 응용성을 가지고 있기 때문에 많은 관심을 받고 있다. 실리콘 기반의 태양전지에 비해서 유기태양전지의 효율이 낮은 단점을 가지고 있기 때문에 효율을 높이기 위한 다양한 연구가 진행되고 있다. 광활성층에서 생성되는 전자-홀 쌍을 효율적으로 분리하여 손실되는 전하를 줄여서 효율을 높이는 방법이 활발히 연구되고 있다. 본 연구에서는 초음파 처리 시간에 따라 나노구조를 가지는 고분자 광활성층의 표면거칠기가 변화하여 유기 태양전지의 전력변환 효율에 미치는 영향을 조사하였다. 전자주게 물질인 P3HT를 용매에 녹여서 스핀코팅 한 후 초음파 처리를 하여 나노 구조를 형성하였고, 초음파 처리 시간에 따라서 형성한 나노 구조의 구조적 및 광학적 특성 변화를 광류미네센스와 원자힘 현미경 측정으로 관찰하였다. 전류밀도-전압 측정 결과는 초음파 처리 시간을 최적화하면 P3HT 나노 입자의 크기가 가장 작게 형성되어 계면 면적을 가장 크게 증가시켜 전자-홀 쌍을 효율적으로 분리하여 전력변환 효율이 증가하는 것을 확인 하였다.