• Journal of the Institute of Electronics Engineers of Korea TC
• /
• 제40권10호
• /
• pp.79-88
• /
• 2003

We demonstrate a novel all-optical packet switching system that is suitable for optical ring networks. For the demonstration, video signals are encoded into optical packets which are composed of header and payload. The optical packets are all-optically processed at a switching node based on all-optical header processor, packet-level clock extraction, bit-level clock extraction, all-optical data format converter and so on.

• Korean Journal of Optics and Photonics
• /
• 제14권2호
• /
• pp.122-129
• /
• 2003

In the case of a AIGalnP/GaP system rectangular parallelepiped high brightness LED which has side walls etched to be slanted off the vertical direction, we have studied the effects of lossy electrodes and material absorption and etching depth and angle of side walls on its light extraction efficiency. If LEDs have no electrodes, in order to obtain an 80％ light extraction efficiency of a TIP (truncated inverted pyramid) LED, the side-etched LEDs should have an etching angle of 22$^{\circ}$~45$^{\circ}$ and an etching depth of 8~17% of a dice height and an absorption coefficient less than 1 $cm^{-1}$ / In case of etching depth of 16~39% of a dice height, we can obtain a 90% light extraction efficiency of a TIP LED. But when LEDs have two electrodes and no absorption loss, in order to obtain an 80％ light extraction efficiency of a TIP LEBs, the side-etched LEDs should have an etching angle of 25$^{\circ}$-45$^{\circ}$ and an etching depth of 30～36% of a dice height. In case of etching depth of 57~71％ of a dice height, we can obtain a 90％ light extraction efficiency of a TIP LED.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• 제7권8호
• /
• pp.1816-1822
• /
• 2003

We propose a novel structure of wavelength selective optical add/drop filter comprising two tap couplers and a fiber Bragg grating. The device has unique features including a simpler structure and a lower cost implementation as compared with existing device for the same operation. The filter performance has been measured and analyzed, experimentally. The implemented prototype filter shows good performance with no­crosstalk power penalty in a 155Mbps per channel wavelength­division­multiplexing transmission system but suffers from a relatively high loss of 3.5㏈ and 21㏈ for transmitted and dropped channel, respectively. While the dropped channel extinction ratio was more than 15㏈, the transmitted channel extinction ratio was more than 26㏈.

• Journal of the Microelectronics and Packaging Society
• /
• 제18권4호
• /
• pp.91-95
• /
• 2011

The light extraction efficiency in GaN based LED was analyzed qualitatively. The extraction efficiency was simulated with patterned shape, depth, size and spacing by using ray-tracing simulation. In simulation result, patterned shape and depth for the optimized extraction efficiency in PSS LED were in indented Hemi-sphere solid. Through the optimal patterning of the various factors, about 40% enhancement in extraction efficiency was obtained.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 한국재료학회 2009년도 춘계학술발표대회
• /
• pp.27.2-27.2
• /
• 2009

현재 질화물 계 발광다이오드는 액정소자의 백라이트유닛, 모바일폰, 차량용램프, 교통신호등 등 다양한 장치의 광원으로 사용되고 있으며, 그 응용분야는 앞으로도 크게 확대되는 추세에 있다. 이는 발광다이오드의 저전력, 장수명, 친환경적인 장점에 의한 것으로, 일반 조명용 광원으로 사용하기 위한 기술개발이 활발히 진행 중이다. 하지만 질화물 계 발광다이오드를 미래의 조명용 광원으로 사용하기 위해서는 광출력이 보다 향상되어야 한다. 발광다이오드의 광출력을 저하시키는 요인으로는 다양한 문제점이 있지만 특히 낮은 광추출특성으로인한 광출력저하 문제를 해결해야 한다. 본 연구에서는 질화물 계 발광다이오드의 광추출특성을 향상시키기 위해서 나노임프린트 리소그래피 공정을 도입하였다. UV 나노임프린트 리소그래피 공정을 통해서 p형 질화갈륨 및 인듐주석산화물 투명전극 층에 sub-micron 급 광결정패턴을 형성하였으며, 광루미네선스와 전기루미네선스 측정을 통하여 광결정패턴으로 인한 광출력 특성을 분석하였다.

• Korean Journal of Remote Sensing
• /
• 제28권4호
• /
• pp.347-355
• /
• 2012

A fast algorithm for endmember extraction is proposed in this study which extracts min. and max. pixels from each band after MNF transform as candidate pixels for endmember. This method finds endmembers not from the entire image pixels but only from the previously extracted candidate pixels. The experimental results by N-FINDR using a simulated hyperspectral image data and AVIRIS Cuprite image data showed that the proposed fast algorithm extracts the same endmembers with the conventional methods. More studies on the effect of noise and more adaptive criteria in extracting candidate pixels are expected to increase the usability of this method for more fast and efficient analysis of hyperspectral image data.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 한국표면공학회 2009년도 추계학술대회 초록집
• /
• pp.248-248
• /
• 2009

GaN 기반 LED 소자의 ITO 표면에 sol-imprinting 기술을 이용하여 잔여층 없이 $TiO_2$ 나노 패턴을 형성하였다. 알콕사이드 계열의 $TiO_2$ sol과 Si 몰드로부터 복제된 PDMS 몰드를 사용하여 표면에 패턴을 형성하고, 이 후 annealing을 통해 내부에 남아있던 불순물을 제거하고 다결정 $TiO_2$을 형성하였다. 표면에 형성된 $TiO_2$ 나노 패턴이 LED 소자 내부에서 발생한 빛의 전반사를 억제하기 때문에 소자의 광추출 효율이 증가하였다.

• Journal of Applied Biological Chemistry
• /
• 제64권3호
• /
• pp.197-203
• /
• 2021

Saponarin is a crucial component of barley sprout, and the production and quantitative analysis are issued to date. In this study, the optimal saponarin extraction conditions were presented on the subject of acetonitrile, ethanol, methanol, and water for the quantitative analysis in barley sprout through the extraction efficiency compared with the solvent concentration and extraction time using the reaction surface methodology. The optimal extraction time and solvent condition for saponarin were 3.9 h and 53.7% of aqueous methanol, respectively. In addition, the effect of LED artificial light on the saponarin production in barley sprouts was evaluated by the light cycle, light quantity, and light quality. The optimal cultivation conditions under artificial light for the growth of barley sprout and saponarin production were most effectively achieved on 220-320 μmol m^-2 s^-1 of the light quantity with 8 h day^-1 of a daylight cycle under 6500K LED combined with red light. Furthermore, blue light was evaluated as the main factor in the biosynthesis of saponarin.

• Journal of Korea Multimedia Society
• /
• 제12권3호
• /
• pp.329-334
• /
• 2009

When an optical disc is being played. the pick-up converts light to analog signal at first. The analog signal is equalized for removing the inter-symbol interference and then the equalized analog signal is converted into the digital signal for extracting the synchronized data and clock signals. There are a lot of algorithms that minimize the BER in extracting the synchronized data and clock when high. density optical disc like BD is being played in low speed. But if the high-density optical disc is played in high speed, it is difficult to adopt the same extraction algorithm to data PLL and PRML architecture used in low speed application. It is because the signal with more than 800MHz should be processed in those architectures. Generally, in the 0.13-${\mu}m$ CMOS technology, it is necessary to have the high speed analog cores and lots of efforts to layout. In this paper, the parallel data PLL and PRML architecture, which enable to process in BD 8x speed of the maximum speed of the high-density optical disc as the extracting data and clock circuit, is proposed. Test results show that the proposed architecture is well operated without processing error at BD 8x speed.

• Korean Journal of Remote Sensing
• /
• 제29권5호
• /
• pp.527-535
• /
• 2013

Extraction of correct endmembers is prerequisite to successful spectral unmixing analysis. Various endmember extraction algorithms have been proposed and most experiments based on endmember extraction have used synthetic image and AVIRIS image data. However, these data can present different characteristics comparing with hyperspectral images acquired from real domestic environment. For this study, a test-bed was constructed for analysing the difference on diverse substances and sizes in domestic areas, and AISA hyperspectral imagery acquired from the test-bed was tested with two well-known endmember extraction algorithms: IEA, and N-FINDR. The results indicated that two different algorithms depended on the number of endmembers and material types in the test-bed. Therefore, optimized number of endmembers and characteristics of materials in test-bed site should be considered for the effective application of endmember extraction algorithms.