• Clean Technology
• /
• v.23 no.2
• /
• pp.196-204
• /
• 2017

CdZnS/ZnO composite was prepared through low-temperature precipitation and drying method. The property of CdZnS/ZnO as a recyclable photocatalyst for the degradation of rhodamine B (RhB) under visible light irradiation was examined. The sample was characterized by XRD, FE-SEM, XPS, UV-vis DRS and photoluminescence techniques before and after repeated reaction to investigate the change of properties during the photocatalytic reaction. During repeated reaction, the CdZnS/ZnO showed an improved photocatalytic activity and recycle stability. Among two feasible reaction pathways for photocatalytic degradation of RhB, the cleavage of conjugated chromophore was found to predominate over N-dealkylation of chromophore skeleton in the present work. The results indicate that the CdZnS/ZnO, prepared by a simple precipitation method, can be used as a visible-light driven photocatalyst with enhanced cycle stability and activity.

• Applied Chemistry for Engineering
• /
• v.16 no.3
• /
• pp.413-421
• /
• 2005

This study focused on the decomposition of toluene in a plasma-photocatalytic hybrid system. Hexagonally packed meso-structured Mn-titanosilicates (Mn-Ti-MCM-41), as the photocatalysts, have been prepared by the hydrothermal method. The physical properties of the photocatalysts were characterized using XRD, XPS, TEM, BET/ICP, and $NH_3$/Toluene-TPD. Experiments were carried out at the applied voltage of 9.0 kV and at room temperature of $20^{\circ}C$. In the plasma only system, the activity of the toluene decomposition was higher than that in the photocatalytic system. However, the amount of by-products, such as phenol, $C_2{\sim}C_4$ alkene, was also increased in the plasma only system. However, the by-products decreased remarkably in a plasma-photocatalytic hybrid system. When Mn5mol%-Ti-MCM-41 was used as a photocatalyst in a plasma-photocatalytic hybrid system, the $CO_2$ selectivity in products was increased dramatically compared to other catalysts. It was confirmed that a plasma-photocatalytic hybrid system was better for toluene decomposition compared to photocatalytic and plasma only systems.

• Membrane Journal
• /
• v.6 no.2
• /
• pp.101-108
• /
• 1996

The oxidation/degradation efficiency of formic acid through the photoelectrochemical reaction has been investigated as a basic research in order to develope the process for degrading toxic organic compounds dissolved in water. A $TiO_{2}$ photoelectro-membrane reactor for purification of water, in which filtration as well as photoelectrocatalytic oxidation of organic compounds could be carried out simultaneously, was developed. Porous $SnO_{2}$ tubes prepared by slip casting and commercial porous stainless steel tubes, being electrically conductive, were used as not only supports but also working electrodes. The UV light with the wavelength of 365 nm was applied as a light source for photocatalytic reactions. The photoelectrocatatytic composite membranes were prepared by coating the support surface with the $TiO_{2}$ sol of pH 1.45. The oxidation efficiency of formic acid increased with the reaction time and the applied voltage, but was almost independent of the solution flux. The results showed that more than 90% of formic acid could he dograded at 27V using the $TiO_{2}$/stainless steel composite membrane, while about 77% in case of the $TiO_{2}/SnO_{2}$ Composite membrane. It was also concluded that the oxidation efficiencies of formic acid could be significantly improved by about 6~7 times by the photoelectrochemical reaction in comparison with those by the photocatalytic reaction only.

• Korean Chemical Engineering Research
• /
• v.44 no.3
• /
• pp.300-306
• /
• 2006

Photocatalyst deposited beads were prepared by fluidized bed chemical vapor deposition (FB-CVD) under various operating conditions of substrates, bed temperature, pressure, and oxygen concentration. Photocatalytic degradation of acetaldehyde was carried out to determine the optimum operating condition of prepared photocatalysts. They were characterized by using FE-SEM, XRD, and XPS. From the FE-SEM photographs, it was found that the surfaces of titania-coated beads were covered with crystal form, particle form, and slick form of titania on alumina, silica-gel, and glass beads, respectively. From the result of photocatalytic degradation of acetaldehyde, it was found that prepared titania/ alumina beads at $600^{\circ}C$, 5 torr showed superior performance to others, and oxygen flow rate has no significant effect.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.594-594
• /
• 2013

금속이 첨가된 타이타니아 물질은 밴드갭이 감소해 자외선보다 파장이 긴 가시광 영역에서도 광촉매 반응을 나타낸다. 바나듐이 도핑된 타이타니아를 sol-gel법으로 제조하여 가시광과 자외선 환경에서 methylene blue의 감소량을 측정해 촉매특성평가를 하였다. 기존 상용 타이타니아(Degussa, P25)를 대조군으로 특성을 평가한 결과 가시광 영역에서 초기 반응 속도가 3배 이상 빨라짐을 확인하였다. UV-vis를 사용해 optical band gap을 측정한 결과 밴드갭이 감소함을 확인할 수 있었다. 도핑이 끝난 타이타니아 전구체 물질을 AAO template 위에 코팅한 후 sodium hydroxide로 template을 제거 후 나노그물을 제작하였다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.05a
• /
• pp.191-191
• /
• 2009

최근 많은 환경오염물질을 제거하기 위한 방법으로 광촉매를 이용한 기술들이 다양하게 활용되고 있다. 본 연구에서는 높은 비표면적을 갖는 관촉매를 제조하기 위해, 전기화학적인 방법인 양극 산화법을 사용하여 기지 Ti 금속 표면에 pore 형태의 광촉매용 $TiO_2$를 제조하고, 염료분해 반응을 통해 광촉매의 효율을 조사하였다. 또한 염료분해 효율을 높이기 위해 $Eu(NO_3)_3$를 첨가하여 염료분해 반응에 미치는 영향에 대해 조사하였다.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 1999.10a
• /
• pp.453-454
• /
• 1999

최근 대기 환경오염이 심각한 문제로 부각됨에 따라 독성 유기물질 분해 및 제독에 반도체 광촉매를 이용한 광산화기술(Advanced Oxidation Process, AOP)을 적용한 연구가 활발히 진행되고 있다. 1972년 Fujishima와 Honda가 전압을 걸어준 TiO$_2$ 단결정 전극상에 자외선을 쪼이면 물이 수소와 산소로 광분해되는 것을 발견한 이후 분균일 광촉매반응(Heterogeneous Photocatalysis)에 관한 연구가 시작되었다.(중략)

• Clean Technology
• /
• v.25 no.1
• /
• pp.46-55
• /
• 2019

CdS and CdZnS/ZnO materials were prepared using precipitation method and used as photocatalysts for the photocatalytic degradation of rhodamine B (RhB) under visible light irradiation. The prepared photocatalysts were also characterized by XRD and UV-vis DRS. The results indicated that the photocatalysts with intended crystalline structures were successfully obtained and both the CdS and CdZnS/ZnO can absorb visible light as well as UV. The photocatalytic activities were examined with the addition of scavenger for various active chemical species and the difference of reaction mechanisms over the catalysts were discussed. The $CH_3OH$, KI and p-benzoquinone were used as scavengers for ${\cdot}OH$ radical, photogenerated positive hole and ${\cdot}O_2{^-}$ radical, respectively. The CdS and CdZnS/ZnO showed different photocatalytic degradation mechanisms of RhB. It can be postulated that ${\cdot}O_2{^-}$ radical is the main active species for the reaction over CdS photocatalyst, while the photogenerated positive hole for CdZnS/ZnO photocatalyst. As a result, the predominant reaction pathways over CdS and CdZnS/ZnO photocatalysts were found to be the dealkylation of chromophore skeleton and the cleavage of the conjugated chromophore structure, respectively. The above results may be mainly ascribed to the difference of band edge potential of conduction and valence bands in CdS, CdZnS and ZnO semiconductors and the redox potentials for formation of active chemical species.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.227.1-227.1
• /
• 2015

산업이 발달하면서 다양한 화학물질이 배출되고 이로 인하여 환경이 오염되고 있으며, 특히, 대부분의 유기 화합물은 대기오염에 많은 영향을 주는 물질로 알려져 있다. 최근 유기 화합물을 제거하기 위해서 UV와 가시광에서 반응하는 광촉매 연구가 진행되고 있다. 본 연구에서는 밴드갭에 변화를 주는 doped $TiO_2$와 가시광에서 반응하는 조촉매를 이용하여 광촉매의 특성을 향상시키는 coupled $TiO_2$를 제조하였다. Doped $TiO_2$를 제조하기 위해서 비금속 물질인 질소(nitrogen)을 사용하였고, coupled $TiO_2$는 graphine oxide(GO)를 환원하여 $TiO_2$-RGO 촉매를 제조하였다. N-$TiO_2$와 $TiO_2$-RGO의 광학 특성을 평가하기 위해서 UV/Vis 분광광도계를 사용하였다. Methylene blue(MB)와 methyl orange(MO)가 분해되는 반응을 통해서 N-$TiO_2$와 $TiO_2$-RGO의 광촉매 특성을 평가하였다. 또한, MB와 MO 분해 테스트에 395 nm long pass filter를 이용하여 가시광에서의 광촉매 활성을 평가하였다.

• Clean Technology
• /
• v.13 no.3
• /
• pp.222-227
• /
• 2007

The photocatalytic degradation of livestock wastewater has been investigated over $TiO_2$ photocatalysts irradiated with a ultraviolet (UV) light. The effect of operational parameters, i.e., distance, reaction area, concentration of suspended solids(SS), and column diameter on the degradation of livestock wastewater has been performed in lab-scale. The optimal conditions for livestock wastewater were determined: distance was 3 cm (less than 7 cm), reaction area was $3.6\;m^2$, SS concentration was 40 mg/L (less than 300 mg/L) and column diameter was 5 mm (less than 10 mm). Under the optimal conditions, COD, color and coliform removal efficiencies were approximately 49%, 53% and 100%, respectively. Non-biodegradable COD removal efficiency increased with 57% using by photocatalysis process. Therefore, it is shown that photocatalysis has an effect on degradation of non-biodegradable organic matter.