• Korean Journal of Optics and Photonics
• /
• v.15 no.2
• /
• pp.171-176
• /
• 2004

A light deflector integrated laser diode(LD) was fabricated and the characteristics of LD and ourput beam deflection as a function of deflector injection current were measured. To integrate the deflector with LD, a passive waveguide was integrated with the LD and a triangular-type light deflector was fabricated on the upper clad of the passive waveguide section. Light deflection from the fabricated light deflector is controlled by the effective refractive index variation induced by carrier injection. To characterize the effect of the deflector injection current, threshold current, slope efficiency, and output beam spectrum were measured as a function of deflector injection current. From these measured data, the increment in the threshold current and the decrement of the slope efficiency were observed. However, the output beam spectrum was not affected by the deflector. The Beam Propagation Method(BPM) was used to simulate the proposed device and the light deflection was measured by the far-field pattern of the output beam as a function of the deflector injection current. In the fabricated deflector integrated LD, the deflection angle of 1.9$^{\circ}$ at the injection current of 15 ㎃ was obtained.

• Proceedings of the SCSK Conference
• /
• 1996.07a
• /
• pp.10-14
• /
• 1996

최근 오존층의 파괴로 인한 지구 자외선량의 증가로 피부암 및 광노화의 발생가능성이 증가되고있다. 광노화의 주요한 현상중의 하나는 탄력섬유상 물질이 축적되는 일광탄력 섬유증이다. 자외선은 탄력소 유전자의 전사과정증가를 유도하며 결국 비정상적인 탄력소의 증가를 유발한다는 보고가 있다. 본 연구에서는 피부 섬유아세포 및 각질형성세포를 배양하여 자외선이 탄력소 유전자발현에 미치는 영향 및 전사조절인자에 미치는 영향을 알아보고자 하였다. 피부섬유아세포에 UVB를 30mJ-200J/m 조사하여 nothern blotting한 결과 UV양이 증가함에 따라 탄력소 전사물이 증가되었고, 1001/$m^2$ 에서 최대의 증가를 보였다. 탄력소 promoter와 CAT을 접합시킨 pEP62 vector을 섬유아세포에 형질전환 시키고 UV에 의한 Promoter 활성을 본 결과 UV조사량이 증가할수록 활성이 증가되었고 200J/$m^2$ 에서 대조군에 비해 5배의 활성 증가를 보였다. 이 system에 광노화 억제물질로 알려진 retinoid를 5 $\times$ $10^{-6}$M처리하였을 때 UV에 의한 탄력소 promoter활성을 약 1/3로 감소시켰다. 각질 형성세포에서 UVB에 의한 transcription factor의 활성을 mobility shift assay에 의해 조사한 결과 AP-1 및 NFkB가 활성화됨을 볼 수 있었다.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.3
• /
• pp.363-368
• /
• 2001

It is well known that numerous factors influence the light output of curing units, but many dentists are un aware that the output of their curing lights are inadequate. This study was conducted to evaluate the light in tensity of visible-light curing units in some private dental clinics and hospital dental clinics. In order to determine the maximum light intensity of the curing units, lamps, filters and fiber optic bundles, they were replaced with new ones and light intensity was remeasured. Light intensity was measured by employing a digital radiometer (EFOS model #8000, USA). Light intensity ranged in $29\sim866mW/cm^2$ (below $150mW/cm^2$ ; 17.8%, $150\sim300mW/cm^2$ : 46.6%, above $300mW/cm^2$ ; 35.6%). The replacement of the components increased the light intensity, with maximum increases of 94.8% for lamps, 82.3% for filters, 200.8% for fiber optics and 361.5% for all three parts. According to the manufacturer of radiometer, curing light is considered as unsuitable for use with a reading of above $300mW/cm^2$ by the radiometer. Applying these criteria to the present study, 64.4% of the curing units required repair or replacement. The results of this study indicated that the light intensities of the curing units used in dental practice were lower than optimum level.

• The Korean Journal of Mycology
• /
• v.24 no.3 s.78
• /
• pp.167-175
• /
• 1996

The objective of this research was to determine the effect of light quality on formation of fruit body primordia (FBPs) of Ganoderma lucidum. To achieve this 5 isolates of the fungus that develops fruit body primordia on nutrient agar media were incubated with or without continuous irradiation. The fluorescent lamps used different colors such as black light blue (BLB), pure blue (P-B), pure green (P-G), pure yellow (P-Y) and pure red (P-R). Effect of periodic light and dark exposures on FBP formation of isolate Gl-009 was investigated. The FBP formation in G. lucidum isolates was also tested under monochromatic light produced by the combination of interference filters and colored glass filters. Three isolates produced FBPs under all kinds of fluorescent lamps, whereas two induced FBPs only under visible light except for BLB fluorescent lamp. However, these isolate did not form FBPs in the dark. The FBP was formed at light intensity from 0.05 to $10.0\;{\mu}mol\;m^{-2}s^{-1}$, and begun to reduce its number as light intensity increase over $0.5\;{\mu}mol\;m^{-2}s^{-1}$. When the isolate was incubated under periodic light and dark exposures, the number and weight of FBP increased as compared with those under continuous light. Initiation of FBP requires at least 4 days of light illumination. Although isolate Gl-003 produced FBPs in a wide range of 400 to 800 nm, other four isolates had two effective regions 400 to 500 nm and 700 to 750 nm in FBP formation.

• Restorative Dentistry and Endodontics
• /
• v.26 no.4
• /
• pp.326-331
• /
• 2001

목적 - 최근 복합레진의 미세변연누출을 줄이기 위한 새로운 광중합 조사방법이 연구되고 있다. 또한 구치용 복합레진이 개발되면서 그 제조회사에서는 5mm 깊이까지 광중합이 가능하다고 소개하고 있다. 본 연구에서는 논리적 가설에 근거한 몇가지 광중합 조사방법이 구치부 class II 와동의 복합레진 충전시 미세변연누출에 어떠한 영향을 미치는지를 관찰하였다. 재료 및 방법 - 100개의 우식증이 없는 사람의 상하악 대구치를 사용했다. 각 치아에 교합-치은방향으로 4mm, 협설 4mm, 깊이 2mm의 class II 와동을 형성하여 인접치와 함께 베이스플레이트 왁스에 매몰하고 구치용 복합레진인 Surefil을 제조 회사의 지시대로 충전하였다. 이때 5가지의 광조사방법을 이용하여 5개의 군으로 나누어 중합하였다(Table 1). 수복된 치아들을 5$^{\circ}C$와 55$^{\circ}C$의 수조에서 번갈아 1분씩 총 500회의 온도변화를 주어 thermocycling을 실시한 후 근첨을 폐쇄하고 수복와동의 치은경계를 제외한 전 표면에 nail varnish를 2회 도포하였다. 2%의 methylene blue용액에 24시간 침적시키고 흐르는 물에 세척한 후 시편을 투명한 에폭시 레진에 매몰하였다. 매몰된 시편을 치아 장축에 평행하게 절단 연마하였다. 입체 현미경으로 미세변연누출을 관찰하고 Kruskal-Wallis One Way ANOVA 와 Dunn's Method로 통계처리 하였다. 결과 - 1. 미세누출은 1군, 4군과 5군, 2군 3군 순으로 증가였다. 이때 1군, 4군과 5군은 통계적 유의성이 없었다(P>0.05). 2. 2군의 경우 1군, 4군, 5군에 비교하여 유의성 있게 미세누출이 많았으며(P<0.05) 3군에 비하여 유의성 있게 적게 나타났다(P<0.05). 3. 3군의 경우 다른 방법들에 비교하여 통계적으로 유의성 있게 미세누출이 많았다(P<0.05).

• Proceedings of the Korea Contents Association Conference
• /
• 2013.05a
• /
• pp.249-250
• /
• 2013

태양광발전소의 설계도, 운영데이터, 현장조사 데이터를 기반으로 태양광발전소의 손실을 분석하여 설비 및 환경 개선을 통한 발전성능 향상 방안으로 활용하기 위해 태양광발전소 손실 분석 방법에 대해 연구한다.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.4
• /
• pp.707-714
• /
• 2003

Plasma Arc Curing(PAC) units operate at relatively high intensity and claimed to result in optimum properties of composite resin in a short curing time, so the interest of pediatric dentists about PAC units have been increased recently. But PAC units used for polymerizing restorative resins produce heat during operation. The purpose of this study was to evaluate temperature transmission through dentin of various depths using two types of PAC units(Flipo, Q-Lux plasma 100). The results from the present study can be summarized as follows : 1. When PAC be used continuously, temperature on tip was increased as curing times, and Q-Lux showed greater temperature rising(p<0.001). 2. Compared temperature transmission as dentin depth, temperature rising rate was decreased as dentin thickened(0.5, 1.0, 1.5, 2.0mm)(p<0.05). 3. Compared temperature transmission as resin depth, temperature rising rate was also decreased as resin thickened(1.0, 2.0mm)(p<0.05).

• Journal of Plant Biotechnology
• /
• v.32 no.4
• /
• pp.307-311
• /
• 2005

The anthocyanin biosynthesis in callus culture of purple sweet potato (Ipomoea batatas L. cv. Borami) was investigated under growth in different light intensity and light emitting diodes (LED) treatment. Pigmented calli were induced from leaf explants cultured on MS agar medium supplemented with $0.5\;{\mu}M$ 2,4-D under light condition. The color value of these calli extracted after $2{\sim}4$ weeks of cultures was $0.4{\sim}0.5\;mg/mL$. Irradiation intensity is an important factor for anthocyanin biosynthesis. The optimal anthocyanin accumulation occurred on light intensity of 3000 lux. Light irradiation of 3000 lux and blue light treatment for 2 h resulted in a significant enhancement of anthocyanin accumulation. This value was 1.4 fold that the control.

• Korean Journal of Optics and Photonics
• /
• v.11 no.4
• /
• pp.250-254
• /
• 2000

We have constructed laser Doppler velocimetry system using self-mixing effect with a semiconductor laser. This technology is based on the frequency mixing phenomena which occurs when light scattered back from the moving object into the laser cavity interferes with light inside the laser. We have compared the value of Doppler shifted frequency with the velocity variation of the wheel. Frequency dependence on the angle between the moving direction of rotating aluminum wheel and the incident beam also have been proved. As an illustration of the performance of the velocimeter, velocity measurements of a rotating disk are described. Doppler signal shows a good linear relationship with velocity of rotating disk.

• Proceedings of the Optical Society of Korea Conference
• /
• 2002.07a
• /
• pp.20-21
• /
• 2002

결맞는 두 개의 레이저 즉 결합광과 조사광을 이용하고 라만 공진 조건을 만족할 때, 특별한 조건하에서 조사광의 흡수가 급격히 줄어드는 검은공진(dark resonance)현상이 일어난다. 이러한 현상은 굴절률 변천에 기인하여 밀도반전없는 레이저 등 비선형 광학과 고분해 분광학, 양자광학 등 많은 분야에 응용되고 있다. (중략)