• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.219-219
• /
• 2016

유기발광소자는 저전력, 빠른 응답속도, 고휘도 및 자체발광 등의 장점들 때문에 고체 광원과 플렉서블 디스플레이로 연구가 진행되고 있다. 유기발광소자는 유기 발광층을 인광물질로 사용 함으로서 100 % 내부양자 효율을 이루고 있지만 공기와 유리기판의 계면과 유리 기판과 ITO 계면에서 발생하는 내부 전반사 효과와 유기물과 ITO 기판 사이에서 발생하는 웨이브 가이드 효과 등으로 인해 발광량의 약 20 %만을 외부로 추출 할 수 있다. 따라서 유기발광소자의 광 추출 효과를 증가시키기 위해서 소자외부에 아웃커플링 필름 또는 마이크로렌즈 어레이 필름을 부착시키는 방법, 금속 나노 입자를 유기발광소자 내에 삽입하여 표면 플라즈몬 효과로 인한 광추출 효율을 높이는 방법 등이 제시되고 있다. 본 연구에서는 Au-ZnO 나노복합체를 간단한 졸겔법을 이용하여 양극 버퍼층으로 사용하여 그에 따른 계면, 전기적 및 광학적 특성을 분석하였다. Au-ZnO 나노복합체를 포함한 tris(8-hydroxyquinolinato) aluminium (Alq3) 발광층에서 ZnO를 포함한 Alq3 발광층보다 엑시톤 수명이 빠르게 감소하는 것을 시간 관련 단광자 계산(Time-Correlated Single Photon Counting) 측정을 통해서 알 수 있었다. 이러한 결과는 Au 금속 나노입자의 플라즈몬 흡수 파장과 Alq3 발광층에서 생성되는 발광 파장이 겹쳐서 효과적인 공명 에너지 전달효과로 인해 Alq3 발광층의 발광성질이 향상된 것을 의미한다. Au-ZnO 나노복합체와 ZnO 나노입자를 가지는 유기발광소자의 전류 효율은 50 mA/cm2 에서 각각 2.27와 1.83 cd/A 가지는 것으로 확인 되었다. 또한 Au-ZnO 나노복합체와 ZnO 나노입자를 사용한 유기발광소자의 전압-전류밀도가 유사한 것을 확인 할 수 있는데 이는 Au 금속 나노입자가 ZnO 나노입자의 정공 주입능력을 저하시키지 않는 것을 의미한다.

• Journal of Sensor Science and Technology
• /
• v.11 no.6
• /
• pp.335-341
• /
• 2002

In this paper, we investigated a novel UV sensor using evanescent field coupling between the side polished fiber and photo-functional polymer waveguide. It was found that resonant wavelength shifts occur due to variation in the refractive index of polymer planar waveguide for its photo-functional properties on exposed UV. Spiroxazine (photochromic dye) was used as the planar waveguide. The resonant wavelength responses were exhibited at 1.44 nm/mW, 1.64 nm/mW, and 1.78 nm/mW when UV irradiations were exposed for 20 seconds, 30 seconds, and 40 seconds, respectively. The recovery time of sensor was independent of UV exposure power and 90% recovery time was 100 seconds.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.6
• /
• pp.63-71
• /
• 1998

In this paper, we experiment the characteristics of coupling coefficient, gain, diffraction efficiency and dependence of time determined by TWM(Two-Wave Mixing), using Fe-LiNbO$_3$ crystal(doped with 0.015Wt.%). From these results, we proposed to apply for optical memory application. The highest coupling angle of 14。 and maximum coupling coefficient of 6.9$cm^{-1}$ / are obtained at 514.5nm wavelength. Also, maximum diffraction efficiency is 54.13% when intensity ratio and writing beam incident angle are 0.1 and 14o, respectively. After fixing process, diffraction efficiency is 21.4%. As an example, we demonstrated the writing and reconstruct optical data using spatial light modualtor and angular multiplexing in most optimal condition.

• Journal of Korean Society of Forest Science
• /
• v.97 no.6
• /
• pp.680-689
• /
• 2008

This present study was conducted to investigate photosynthetic responses and chlorophyll fluorescence performances of Cornus controversa, Fraxinus rhynchophylla, Betula schmidtii, Prunus leveilleana, and Acer mono seedlings growing under four different light intensity regimes (full sun, and 65~72%, 29~40%, 7~12% of full sun). As result, Cornus controversa, Fraxinus rhynchophylla, and Betula schmidtii showed outstanding photosynthetic capacities in full sun and showed low shade tolerance. Prunus leveilleana showed good photosynthetic capacity in three treatment levels except for 7~12% of full sun and showed common shade tolerance. While, Acer mono showed good photosynthetic capacity and chlorophyll fluorescence in 29~40% of full sun. Acer mono showed the highest shade tolerance compared to the other four species.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.05a
• /
• pp.333-336
• /
• 2001

The transient response in PDFA(Praseodymium-Doped Fiber Amplifier) is theoretically investigated. The PDFA has the spectral gain band in 1.3${\mu}{\textrm}{m}$. The transient model includes the transient buildup of the population inversion, the pump power, and the signal power and their transient variation along the fiber amplifier. The numerical analysis of transient model can predict the gain saturation, the variation of pump power and the gain as a function of the fiber length. It also shows the gain saturation and recovery effects depending on the pumping rate lead to distortion and saturation in the amplification of optical pulse. The results of numerical analysis, for the case of the Pr ion concentration of 1000ppm and the pump power of 0.5W the gain saturation is obtained 30dB at the length of 5m and the saturation time of upper level is 250 $mutextrm{s}$.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.1
• /
• pp.329-332
• /
• 2012

LEDs are using widely in a field of illumination, LCD LED backlight, mobile signals because they have several merits, such as low power consumption, long lifetime, high brightness, fast response, environment friendly. To achieve high performance LEDs, one needs to enhance output power, reduce operation voltage, and improve device reliability. In this paper, we have proposed that the optimum design and specialized process could improve the performance of LED chip. It was showed an output power of 7cd and input supplied voltage of 3.2V by the insertion technique of current blocking layer. In this paper, GaN-based LED chip which is built on the sapphire epi-wafer by selective MOCVD were designed and developed. After that, their performances were measured. It showed the output power of 7cd more than conventional GaN-based chip. It will be used the lighting source of a medical equipment and LCD LED TV with GaN-based LED chip.

• Korean Journal of Materials Research
• /
• v.9 no.11
• /
• pp.1144-1147
• /
• 1999

The effect of the heat treatment on electrochromic properties of $\textrm{MoO}_3$ thin films is investigated by studing optical modulation, optical density, response time, and cyclic voltammetry. From the results of XRD analysis, heat-treated at $450^{\circ}C$ in air for 1 hour Moo3 thin films are found to be crystalline while as-deposited and heat- treated at low temperature ($\leq\;300^{\circ}C$) film are amorphous. The electrochromic devices using as-deposited $\textrm{MoO}_3$ films exhibit good electrochromic properties compared to those using the heat treated $\textrm{MoO}_3$ films. It has shown that the heat-treatment affected the reversible color change and the electrochromic properties of $\textrm{MoO}_3$ films.

• Journal of IKEEE
• /
• v.27 no.3
• /
• pp.288-295
• /
• 2023

In this work, we investigated the role of oxygen annealing on the performance of Metal-Semiconductor-Metal (MSM) UV photodetector (PD) fabricated by radio frequency (RF)-sputtered Ga₂O₃ films on SiC substrates. Oxygen-nnealed Ga₂O₃ films displayed a notable increase in photocurrent and a faster decay time, indicating a decrease in persistent photoconductivity. This improvement is attributed to the reduction of oxygen vacancies and variation of defects by oxygen post-annealing. Our findings provide valuable insights into enhancing PD performance through oxygen annealing.

• The Journal of the Acoustical Society of Korea
• /
• v.30 no.1
• /
• pp.33-41
• /
• 2011

To substitute TLS in the hybrid system which is combined with Sagnac interferometer and fiber bragg grating (FBG) it is necessary to investigate how the laser source (TLS and CW) and sensor material variate the response of fiber optic sensor. Two different hollow cylinder type mandrel materials are proposed which are PTFE and PTFE+carbon and 18 m optical fiber is wounded at the mandrel surface. CW laser source experiments had been done in the oil tank which is filled with transformer oil in the 1 kHz~20 kHz frequency range. Also Sagnac interferometer fiber optic sensor is combined with FBG called hybrid system and TLS used as a light source. Based on the experimental results PTFE sensor showed more higher magnitude of detection signal rather than carbon sensor and this result is agreement with the McMahon's theoretical results. Phase variation is inversely proportional to the elastic modulus of the mandrel material. In PTFE fiber sensor, tunable laser source showed more higher performance rather than CW case. Therefore, TLS fiber optic sensor can be applied to the hybrid system which is combined with Sagnac and FBG.

• Journal of KIISE:Information Networking
• /
• v.34 no.6
• /
• pp.466-474
• /
• 2007

Asymmetric networks that the downlink bandwidth is larger than the uplink bandwidth may cause the degradation of the TCP performance due to the uplink congestion. In order to solve this problem, this paper designs and implements the Dynamic Segment Size Control mechanism which offers a suitable segment size for current networks. The proposed mechanism does not require any changes in customer premises but suppress the number of ACKs using segment reassembly technique to avoid the uplink congestion. The gateway which adapted the Dynamic Segment Size Control mechanism, detects the uplink congestion condition and dynamically measures the bandwidth asymmetric ratio and the packet loss ratio. The gateway reassembles some of segments received from the server into a large segment and transmits it to the client. This reduces the number of corresponding ACKs. In this mechanism, the SACK option is used when occurs the bit error during the transmission. Based on the simulation in the GEO satellite network environment, we analyzed the performance of the Dynamic Segment Size Control mechanism.