• Current Industrial and Technological Trends in Aerospace
• /
• v.8 no.2
• /
• pp.76-85
• /
• 2010

This paper discusses recent development trends of fiber optic gyroscope (FOG) in space application. Fiber optic gyroscope utilizes Sagnac effect to measure the angular rate of a rotating object in space. Having a rather short development history compared to ring laser gyroscope (RLG), the fiber optic gyroscope, owing to the emerging technologies in fiber optic society and the digital signal processing technique, reveals itself as a noteworthy replacement of the ring laser gyroscope in the space mission. This paper summarizes the current trends of fiber optic gyroscope based on the actual products commercialized in the market over the last decades, while presenting the future development trends of the fiber optic gyroscope in the space exploration.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.6
• /
• pp.551-555
• /
• 2009

We studied the design of fiber optic gyroscope that enables to sense high rotation by extending the limit of rotation sensibility of fiber optic interferometer. Based on the digital serrodyne modulation technique, the signal processing of fiber optic gyroscope was designed and the prototype fiber optic gyroscope showed the high rotation sensibility up to ${\pm}3000[deg/sec]$ and scale factor performance of about 150[ppm] by the experiments. Accordingly, we confirmed that the design of fiber optic gyroscope was valid for high rotation.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.9
• /
• pp.97-103
• /
• 2006

This paper described the design and performance evaluation of fiber optic gyro using digital closed-loop processing. For the feedback to null the gyro input rate, digital serrodyne modulation was employed, and for scale factor stabilization, the control circuits of modulation amplitude and optical power are implemented. Performance tests show that prototype fiber optic gyro has bias stability of 0.34 deg/hr, scale factor non-lineality of about 100ppm, and maximum measurement range of ${\pm}500$ deg/sec.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.8
• /
• pp.789-797
• /
• 2009

Gyroscope's deadzone is a region where can not detect the rate even though the actual rotation is applied. This paper analyzed the cause of deadzone by modeling/simulation and introduced pulse dithering method to overcome. From the testing of 3-axis fiber optic gyro system using 900m fiber, it confirmed deadzone could be effectively eliminated by combination of three factors, dither amplitude, dither frequency, and gyro loop gain.

• Korean Journal of Optics and Photonics
• /
• v.11 no.2
• /
• pp.97-101
• /
• 2000

We proposed and demonstrated a new scheme for subtracting the source excess noise from the output of the fiber-optic gyroscope. Unlike the previous methods, this scheme has an advantage of not requiring a delaying fiber for source noise detection and can be simply applied to fiber gyroscope operating at the proper frequency. By usmg this scheme. the proper frequency component of the source excess noise was subtracted from the gyroscope output. As a result, we obtained the reduction of noise by 12 dB (electrical) which was measured from the noise floor spectrum in the fiber gyroscope modulated at the proper frequency. We also obtarned !be random walk coefficient of thc gyro output reduced by a factor of 3.5. f 3.5.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.245-247
• /
• 2009

본 연구에서는 광섬유 자이로(Fiber Optic Gyro)의 광학부 간섭계를 모사하고자 한다. 디지털 신호처리를 이용하여 광섬유 고리의 응답특성을 모사한다. 디지털 신호의 1bit 분해능으로 0.1deg/hr의 성능을 내는 광섬유 자이로를 모사하기엔 부족하다. 본 연구에서는 Random Noise를 활용하여 분해능을 높임으로써 광섬유 고리의 성능을 정확히 모사하고자 한다. 입력 레이트에 Random Noise를 실어줌으로써 1bit 분해능의 성능을 높일 수 있다. 1bit 사이의 값들이 랜덤노이즈로 인해 1bit 더해지거나 빼짐으로써 정확한 값을 갖을 수 있다.

• Korean Journal of Optics and Photonics
• /
• v.10 no.5
• /
• pp.396-400
• /
• 1999

In the fiber-optic gyroscope employing a high-power erbium-doped fiber source, the source excess noise was subtracted from the gyro output through a single processing to improve the gyroscope sensitivity. As the result, we obtained the reduction of noise by 13.5 dB (electrical) which was measured from the noise floor spectrum when the gyro was modulated with the depth of 1.8 rad. In addition, the random walk coefficient of the gyro output was reduced by a factor of 4~5.

• Korean Journal of Optics and Photonics
• /
• v.14 no.2
• /
• pp.155-160
• /
• 2003

We have constructed and characterized a depolarized fiber-optic gyroscope that uses a length of single-mode fiber as a sensing loop fiber. We have also calculated the noise characteristics of the gyroscope and have found an optimum phase modulation depth that gives the highest signal-to-noise ratio in the gyroscope. The random walk coefficient as small as 0.7$\times$10$^{-3}$ deg/√hr was obtained at the modulation depth of around 2.4 rad. The random walk coefficients measured at various modulation depths were found to be in reasonable agreement with the calculation.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.242-243
• /
• 2000

Erbium 첨가 광섬유(EDF) 광원은 출력 특성과 온도에 대한 파장 특성이 우수하여 Sagnac 간섭계의 원리를 이용한 광섬유 자이로스코프(이하 줄여 자이로라 함)에 많이 사용되고 있다. 이득매질인 EDF를 광원 겸 광증폭기로 사용하는 광섬유 증폭기형 광원 (Fiber Amplifier/source : FAS) 방식$^{[l-2]}$ 은 기존의 single-pass 방식$^{[3]}$ 에 비해서 구조가 단순하고 검출광 power가 크다는 장점이 있다. 그런데, 검출광 power가 큰 경우에 자이로의 SNR이 광원의 과잉잡음(excess noise)에 의해서 제한되므로 실제로 자이로의 측정감도는 개선되지 않는 문제점이 있다.$^{[4]}$ Single-pass 방식의 광원을 사용하는 경우, 적절한 신호처리를 통해 자이로 출력신호에 포함된 광원의 과잉잡음의 적정주파수 성분을 소거함으로써 자이로 신호의 SNR을 개선시킨 바 있었다.$^{[5]}$ 그러나, 일반적으로 single-pass 방식의 경우에는 검출광 power가 작아서 자이로의 SNR이 광원의 과잉잡음에 의해서 제한되는 경우는 드물다. 반면에 증폭기형 광원 방식은 자이로로부터 되돌아오는 신호광이 다시 광원으로 입사되어 EDF를 반대 방향으로 진행하는 동안 증폭되기 때문에 충분히 큰 검출광 power를 얻을 수 있다. 따라서, 자이로 신호에 포함된 광원의 과잉잡음이 소거된다면 자이로 신호의 SNR은 크게 개선될 것으로 여겨진다. 이 논문에서는 광섬유 증폭기형 광원 방식(FAS)의 자이로에 대해 위와 같은 신호처리를 이용하여 광인의 과잉잡음의 적정주파수 성분을 소거하는 실험을 하였다. (중략)한 흡수를 확인하고, $^4$T$_2$$\longrightarrow$$^4$A$_2$(650-800 nm), $^2$E$\longrightarrow$$^4$A$_2$에 의한 nophonon line R$_1$, R$_2$(680.4, 678.5 nm) 및 $^2$T$_1$$\longrightarrow$$^4$A$_2$(655.7, 649.3, 645.2 nm)의 형광방출 스펙트럼을 얻었으며, 형광수명은 0.264 ms로 조사되었다. 제조된 레이저 발진봉은 직경 6.3 m, 길이 45 nm이었다.\pm$0.06kHz Ge $F_4$; -1.84$\pm$0.04kHz$0.04kHz/TEX>0.04kHz 모국어 및 관련 외국어의 음운규칙만 알면 어느 학습대상 외국어에라도 적용할 수 있는 보편성을 지니는 것으로 사료된다.없다. 그렇다면 겹의문사를 [-wh]의리를 지 닌 의문사의 병렬로 분석할 수 없다. 예를 들어 누구누구를 [주구-이-ν가] [누구누구-이- ν가]로부터 생성되었다고 볼 수 없다. 그러므로 [-wh] 겹의문사는 복수 의미를 지닐 수 없 다. 그러면 단수 의미는 어떻게 생성되는가\ulcorner 본 논문에서는 표면적 형태에도 불구하고 [-wh]의미의 겹의문사는 병렬적 관계의 합성어가 아니라 내부구조를 지니지 않은 단순한 단어(minimal $X

• Korean Journal of Optics and Photonics
• /
• v.5 no.1
• /
• pp.131-137
• /
• 1994

We demonstrate a novel mode locked fiber laser gyroscope that utilizes a rare-earth doped fiber. The output of the gyroscope is a series of short optical pulses. Without rotation, the optical pulses are equally spaced in the time domain. With rotation, the intervals of the optical pulses changes. By measuring the separation of the optical pulses in time domain, the rotation rate could be obtained. We also discuss the polarization effect that can cause signal errors.errors.