• Journal of Animal Environmental Science
• /
• v.12 no.3
• /
• pp.107-114
• /
• 2006

This study was carried out to investigate the effect of new foot-bath facility and detergent solution (sodium molylbdenate, citrate, potassium nitrate, tataric acid, sodium hypo-cholorite, and zinc sulfate) on claw health in lactating dairy cows. Minimal inhibition concentration (MIC) and minimal bactericidal concentration (MBC) of copper sulphate were 0.31% for E. coli and Bacillus isolated from cows claw. The MIC and MBC of new detergent for E. coli were 1.25% and 5%, respectively, however their respectively values for Bacillus were noticed 0.63% and 2.5%. Both 5E. coli and Bacillus populations in petri-dishes were significantly reduced (more than 95%) with the application of new detergent solution (5% or 16%). Locomotion score (LS 1-5; very good to severely bad) of lactating cows were significantly improved with in 30 days with the use of new detergent solution in foot bath. The LS2 (n=16), LS3 (n=16), and LS4 (n=7) were shown 100%, 43.8%, and 14.3% recovery rate within 30 days with the use of new detergent solution. However, LS5 (n=2) were not recovered to normal claw health and locomotion score within 30 days of new detergent application. Usage of new detergent solution for 60 days in a foot bath have shown 81.3%, 71.4% and 50.0% recovery rate in cows with LS3, LS4 and LS5, respectively. Abnormal claw incidence was reduced from 18.8% to 1.5% in overall herd (n=80) with the use of new detergent solution (16%) in a foot bath for 90 days. In conclusion, usage of 16% of our detergent solution for 60 days in a foot bath can significantly improve the cow claw health and thus mitigate the negative effects of abnormal claw on productivity of cows and dairy farm income.

• Economic and Environmental Geology
• /
• v.35 no.3
• /
• pp.179-189
• /
• 2002

The Geology of the Shizhuyuan W-Sn-Bi-Mo deposits, situated 16 Ian southeast of Chengzhou City, Hunan Province, China, consist of Proterozoic metasedimentary rocks, Devonian carbonate rocks, Jurassic granitic rocks, Cretaceous granite porphyry and ultramafic dykes. The Shizhuyuan polymetallic deposits were associated with medium- to coarse-grained biotite granite of stage I. According to occurrences of ore body, ore minerals and assemblages, they might be classified into three stages such as skarn, greisen and hydrothernlal stages. The skarn is mainly calcic skarn, which develops around the Qianlishan granite, and consists of garnet, pyroxene, vesuvianite, wollastonite, amphibolite, fluorite, epidote, calcite, scheelite, wolframite, bismuthinite, molybdenite, cassiterite, native bismuth, unidetified Bi- Te-S system mineral, magnetite, and hematite. The greisen was related to residual fluid of medium- to coarse-grained biotite granite, and is classified into planar and vein types. It is composed of quartz, feldspar, muscovite, chlorite, tourmaline, topaz, apatite, beryl, scheelite, wolframite, bismuthinite, molybdenite, cassiterite, native bismuth, unknown uranium mineral, unknown REE mineral, pyrite, magnetite, and chalcopyrite with minor hematite. The hydrothermal stage was related to Cretaceous porphyry, and consist of quartz, pyrite and chalcopyrite. Scheelite shows a zonal texture, and higher MoO) content as 9.17% in central part. Wolframite is WO); 71.20 to 77.37 wt.%, FeO; 9.37 to 18.40 wt.%, MnO; 8.17 to 15.31 wt.% and CaO; 0.01 to 4.82 wt.%. FeO contents of cassiterite are 0.49 to 4.75 wt.%, and show higher contents (4.]7 to 4.75 wt.%) in skarn stage (Stage I). Te and Se contents of native bismuth range from 0.00 to 1.06 wt.% and from 0.00 to 0.57 wt.%, respectively. Unidentified Bi-Te-S system mineral is Bi; 78.62 to 80.75 wt.%, Te; 12.26 to 14.76 wt.%, Cu; 0.00 to 0.42 wt.%, S; 5.68 to 6.84 wt.%, Se; 0.44 to 0.78 wt.%.

• Horticultural Science & Technology
• /
• v.34 no.1
• /
• pp.94-101
• /
• 2016

The purpose of this study was to establish postharvest management techniques including a temperature pre-conditioning protocol for maintaining fruit quality in newly developed early-season Korean pear cultivar 'Hanareum' (Pyrus pyrifolia Nakai). The fruits were treated with three different pre-conditioning temperatures (21, 25, or $29^{\circ}C$) for 4 days according to the harvest time (103 or 110 days after full bloom, DAFB). The percent weight loss was relatively low in the fruits subjected to low pre-conditioning temperature regardless of harvest time. The firmness of the fruits treated with pre-conditioning at $21^{\circ}C$ remained high during 20 days of simulated marketing at $25^{\circ}C$, although all treated fruits showed a general decline of firmness with extended time of simulated marketing. These fruits also showed higher appearance and a lower incidence of mealiness disorder symptoms. During the experimental periods, the production of ethylene was lower in the fruits pre-conditioned at $21^{\circ}C$ in comparison with those of treated at 25 and $29^{\circ}C$. High respiration rates were obvious in the fruits pre-conditioned at high temperature ($29^{\circ}C$), especially in the optimum-harvested fruits, where respiration was approximately two times higher than that of fruits exposed to $21^{\circ}C$ during pre-conditioning. However, the respiration rate was similar during simulated marketing at $25^{\circ}C$ regardless of harvest time. These results demonstrated that temperature pre-conditioning at $21^{\circ}C$ is a simple and effective postharvest technique for summer harvested Korean pear cultivars including 'Hanareum'.

• The KIPS Transactions:PartB
• /
• v.13B no.5 s.108
• /
• pp.561-568
• /
• 2006

WPS(Wearable Personal Station) for next generation PC can define as a core terminal of 'Ubiquitous Computing' that include information processing and network function and overcome spatial limitation in acquisition of new information. As a way to acquire significant dynamic gesture data of user from haptic devices, traditional gesture recognizer based on desktop-PC using wire communication module has several restrictions such as conditionality on space, complexity between transmission mediums(cable elements), limitation of motion and incommodiousness on use. Accordingly, in this paper, in order to overcome these problems, we implement hand gesture recognition system using fuzzy algorithm and neural network for Post PC(the embedded-ubiquitous environment using blue-tooth module and WPS). Also, we propose most efficient and reasonable hand gesture recognition interface for Post PC through evaluation and analysis of performance about each gesture recognition system. The proposed gesture recognition system consists of three modules: 1) gesture input module that processes motion of dynamic hand to input data 2) Relational Database Management System(hereafter, RDBMS) module to segment significant gestures from input data and 3) 2 each different recognition modulo: fuzzy max-min and neural network recognition module to recognize significant gesture of continuous / dynamic gestures. Experimental result shows the average recognition rate of 98.8% in fuzzy min-nin module and 96.7% in neural network recognition module about significantly dynamic gestures.

• Korean Journal of Heritage: History & Science
• /
• v.54 no.4
• /
• pp.36-59
• /
• 2021

This study infers the origin and production period of the , which is in the Onyang folk museum, through analysis and interpretation of the Haeju Palgyeong and exploration of the landscapes and traditions contained in the painting. The first collection of landscapes to Haeju was identified as Haeju Palgyeong by Ku Sa-meng (1531-1604). Yoo Man-ju, writing in 1782, referred to it as Go-palgyeong in 『Heumyeong』 while Haeju Palgyeong was defined as Geum-palgyeong (今八景), which is the Haeju Palgyeong in the earliest period confirmed by literature. is 'Boating on the Nam river (南江泛舟)', 'Lotus viewing at Buyongdang (芙蓉賞蓮)', 'Foot washing at Gwangseokcheon (廣石濯足)', 'Seokbyul at Haeunkyo (泣川送客)', 'Fishing at Haeunjeong (東亭釣魚)' and 'Sea view at Namsan( 南山望海)', and the final two contain a picture that contains 'Viewing the moon at Yeonghaeru (瀛海玩月)' and 'Writing contest and Archery at Baeklimjeong (栢林觀德)' The Suyang Chaemi(首陽採薇), Shingwang-jeoljeol (神光霽雪), and Jiseong falls (池城瀑布) of Gopalgyeong, which were excluded from Haeju Palgyeong, are all landscapes unfolding as a grand site of Suyangsan Mountain. is a result of the reorganization of Seunggyeong centered on Eupchi (邑治), away from the Suyangsan area. It has emerged as a seunggyeong of Haeju. The elaborateness of trying to contain the detailed prizes representing Haeju, such as the specialty sake of Haeju, is revealed. Most of the landscapes depicted in are historic and outstanding spots in Haemok, but the scenes of life related to daily life are properly arranged. In addition, Foot washing (濯足), Fishing(釣魚), Doing laundry (漂母), Lotus viewing (賞蓮), Sending guests (送客), Drinking (飮酒), sea viewing (望海), Moon viewing (玩月), Archery (射藝), Poetry (詩作), Drinking tea (飮茶), and Dancing (歌舞) are of various styles. Compared with the Gopalgyeongs, Haeju Palgyeong did not take into account the distribution of landscapes in the four seasons, and the small-sized view was also broken. When considering the time of the construction of Haeunjeong and the deterioration of Yeonghhoeru, it is believed that was produced in the early- to mid-18th century. is considered to be a painting that contributed to strengthening the sense of intimacy with the local people and promoting the pride of Haeju by showing the representative scenery of Haeju, such as scenic spots and customs, away from the ideal utopia.

• Korean Journal of Remote Sensing
• /
• v.37 no.5_2
• /
• pp.1259-1268
• /
• 2021

The 2nd Geostationary Ocean Color Imager (GOCI-II) is the successor to the Geostationary Ocean Color Imager (GOCI), which employs one near-ultraviolet wavelength (380 nm) and eight visible wavelengths(412, 443, 490, 510, 555, 620, 660, 680 nm) and three near-infrared wavelengths(709, 745, 865 nm) to observe the marine environment in Northeast Asia, including the Korean Peninsula. However, the multispectral radiance image observed at satellite altitude includes both the water-leaving radiance and the atmospheric path radiance. Therefore, the atmospheric correction process to estimate the water-leaving radiance without the path radiance is essential for analyzing the ocean environment. This manuscript describes the GOCI-II standard atmospheric correction algorithm and its initial phase validation. The GOCI-II atmospheric correction method is theoretically based on the previous GOCI atmospheric correction, then partially improved for turbid water with the GOCI-II's two additional bands, i.e., 620 and 709 nm. The match-up showed an acceptable result, with the mean absolute percentage errors are fall within 5% in blue bands. It is supposed that part of the deviation over case-II waters arose from a lack of near-infrared vicarious calibration. We expect the GOCI-II atmospheric correction algorithm to be improved and updated regularly to the GOCI-II data processing system through continuous calibration and validation activities.

• Korean Journal of Heritage: History & Science
• /
• v.46 no.1
• /
• pp.208-227
• /
• 2013

Twenty-seven bronze bowls excavated from the Goryo burial complex at Deobu-gol were examined for their microstructure and chemical composition to characterize the bronze technology practiced by commoners at the time. Results showed that the objects examined can be classified into four groups: 1) objects forged out of Cu-near 22%Sn alloys and then quenched; 2) objects cast from Cu-below 10% Sn alloys containing lead; 3) objects cast from Cu-10%~20% Sn alloys containing lead and then quenched; 4) objects forged out of Cu-10~20% Sn alloys containing lead and then quenched. This study revealed that the fabrication technique as determined by alloy compositions plays an important role in bronze technology. The use of lead was clearly associated with the selection of quenching temperatures, the character of inclusions and the color characteristics of bronze surfaces. It was found that the objects containing lead were quenched at temperatures of $520^{\circ}{\sim}586^{\circ}C$ while those without lead were quenched at the range of $586^{\circ}{\sim}799^{\circ}C$. The presence of selenium in impurity inclusions was detected only in alloys containing lead, suggesting that the raw materials, Cu and Sn, used in making the lead-free alloys for the first group were carefully selected from those smelted using ores without lead contamination. Furthermore, the addition of lead was found to have significant effects on the color characteristics of the surface of bronze alloys when they are subjected to corrosion during interment. In leaded alloys, corrosion turns the surface light green or dark green while in unleaded alloys, corrosion turns the surface dark brown or black. It was found that in fabrication, the wall thickness of the bronze bowls varies depending on the application of quenching; most of the quenched objects have walls 1mm thick or below while those without quenching have walls 1mm thick or above. Fabrication techniques in bronze making usually reflect social environments of a community. It is likely that in the late Goryo period, experiencing lack of skilled bronze workers, the increased demand for bronze was met in two ways; by the use of chief lead instead of expensive tin and by the use of casting suitable for mass production. The above results show that the Goryo bronze workers tried to overcome such a resource-limited environment through technological innovations as apparent in the use of varying fabrication techniques for different alloys. Recently, numerous bronze objects are excavated and available for investigation. This study shows that with the use of proper analytical techniques they can serve as a valuable source of information required for the characterization of the associated technology as well as the social environment leading to the establishment of such technology.

• Journal of the Korean Orthopaedic Association
• /
• v.56 no.5
• /
• pp.391-397
• /
• 2021

Purpose: Tranexamic acid (TXA) can reduce perioperative blood loss and the frequency of blood transfusions in lower extremity surgery. On the other hand, the effects of TXA on reverse total shoulder arthroplasty (rTSA) remain undetermined. This study evaluated the efficacy of TXA on perioperative blood loss, transfusion requirements, and the change in the hemotologic index. Materials and Methods: This study evaluated patients who underwent rTSA from September 2009 to July 2020. The patients were classified into two groups. The TXA group were administered TXA intravenously and topical TXA during surgery. The non-TXA group was not administered TXA. The quantity of hemovac drainage, which represented the postoperative blood loss, transfusion requirements, and postoperative change in hemoglobin and hematocrit level, were recorded. Results: The TXA and non-TXA groups consisted of 93 and 84 patients, respectively. The preoperative demographics showed no significant differences in age (72.0±7.0 vs. 71.5±5.8, p=0.656), sex (male:female, 28:65 vs. 23:61, p=0.689) and the prevalence of hypertension and diabetes (hypertension:diabetes:both, 36:3:13 vs. 32:3:8, p=0.806) between the two groups. There were significant differences in the requirements of transfusion (0 vs. 9, p=0.001), hemovac drainage at the 1^st (98.8±61.2 ml vs. 162.7±98.8 ml, p<0.001), the 2^nd postoperative day (73.8±48.4 ml vs. 91.5±54.5 ml, p=0.024), hemoglobin level at the 1^st (11.7±1.2 g/dl vs. 11.2±1.4 g/dl, p=0.048), 3^rd (10.9±1.2 g/dl vs. 10.2±1.2 g/dl, p<0.001), and 6^th (11.2±1.3 g/dl vs. 10.7±1.3 g/dl, p=0.020) postoperative day, and the hematocrit level at the 1^st (35.0%±3.6% vs. 32.5%±3.8%, p=0.001), 3^rd (32.3%±5.0% vs. 29.8%±3.6%, p<0.001), and 6^th (33.5%±3.8% vs. 31.5%±3.7%, p<0.001) postoperative day between the two groups. Conclusion: Intravenous and topical intra-articular TXA can reduce the transfusion requirement and blood loss in rTSA.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.3
• /
• pp.120-129
• /
• 2022

The purpose of this study is to analyze the chemical composition of smalt pigments used in 10 large Buddhist paintings in the Joseon Dynasty using energy dispersive X-ray spectroscopy, and to clarify the material and characteristics by observing morphological characteristics using polarized light microscopy and a scanning electron microscope. Through chemical composition analysis, the smalt of all 10 large Buddhist paintings is judged to be potash glass using SiO₂ as a former and K₂O as a flux. In addition to the components related to cobalt ore used as a colorant, the paintings were found to contain high levels of As₂O₃, BaO, and PbO. The smalt particles did not have specific forms, and were blue in color, with various chromaticity. In some particles, conchoidal fracture, spherical bubbles, and impurities were observed. Through backscattered electron images, it was found that the smalt from paintings produced in the early 18th century AD had a high level of As, but the smalt from paintings produced from the mid-18th century AD onwards exhibited various contrast differences from particle to particle, and there was smalt with high levels of As, Ba, and Pb. Through the above results, the large Buddhist paintings in the Joseon Dynasty are divided into three smalt types. Type A is a type with high As₂O₃, type B is a type with high BaO, and type C is a type with high PbO. Looking at the three types of smalt pigments by the period of production, although some in-between periods were not detected, type A was confirmed to have been used from 1705 to 1808, while type B and type C were shown to have appeared in 1750 and used until 1808. This reveals that only one type of smalt was used until the early 18th century AD, and from the middle of the 18th century AD, several types of smalt were mixed and used in one large Buddhist painting. Studies such as this research are expected to provide insights into the characteristics of the smalt pigments used to produce large Buddhist paintings at the time.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.13 no.1
• /
• pp.103-114
• /
• 2011

The present survey was conducted to investigate effects of weaning age on market weights of steers and calf mortality in Hanwoo. Eight hundred and sixty-two Hanwoo cow-calf operations from all nine provinces were surveyed via personal interviews. The number of farms categorized by herd (heifer plus cow) size were 188, 364, 227 and 83 for <20 heads, 20~49 heads, 50~99 heads and >100 heads, respectively. Approximate 40% of farms surveyed weaned calves at three months of age. The percentages of farms weaning calves over three months of age were 53.5%, 37.5%, 43.7% and 39.0% for <20 heads, 20~49 heads, 50~99 heads and >100 heads, respectively. The herd size did not affect market weights of Hanwoo steers. However weaning age was negatively correlated to carcass weight of Hanwoo steers, showing that as weaning age decreased, carcass weights of Hanwoo steers increased. The average calf mortality was 5.6% and the herd size did not affect calf mortality. But weaning age was shown to be positively correlated to calf mortality and the rate of diarrhea that caused calf death, suggesting that as weaning age decreased, calf mortality and the rate of diarrhea decreased. Overall, the results of present study suggest that a decrease of calf weaning age in Hanwoo can increase the profit of Hanwoo cow-calf operations by increasing carcass weight of Hanwoo steers and by decreasing calf mortality.