• Journal of the Mineralogical Society of Korea
• /
• v.19 no.2 s.48
• /
• pp.63-69
• /
• 2006

When rocks are exposed to the near surface environment, they are broken down due to several factors such as physical and chemical weathering during the geologic time. The feldspar and mica, which are the main rock-forming minerals, are easily broken down relative to other minerals. In order to reproduce some weathered minerals similar to the ones exist in natural weathered granite, there was an experimental interaction between fresh minerals and acidic solution. In low pH condition, biotite initially dissolved and its surface structure broke down, whereas plagioclase dissolved and had a needle-shaped dissolved morphology with some precipitates composed of Al element. The minerals were deeply dissolved in a strong acid condition, showing the prominent dissolved structure. Some etch pits and dissolved textures developed on the natural mineral surfaces are similarly found in our experiment, suggesting the development of mineral dissolution and weathering texture by the influence of the mineral's intrinsic nature.

• Economic and Environmental Geology
• /
• v.45 no.2
• /
• pp.205-215
• /
• 2012

Metal ions, toxic or potentially toxic to biota and human beings, can be immobilized by sorption onto the mineral surfaces in soils and sediments. This article briefly explains theories regarding the chemical properties of mineral surfaces to sorb metal ions and processes of extended X-ray absorption fine structure (EXAFS) analysis for sorption study, and reviews atomic-scale findings on metal sorption on mineral surfaces. The theoretical understanding on the chemistry of mineral surfaces and metal sorption is fundamental to the proper analysis of the atomic-scale spectroscopy to determine the sorption phases. Atomic-scale findings on metal sorption phases discussed here include co-precipitation, ternary complexation, aging effects, and desorption possibilities, as well as outer-sphere complexation, inner-sphere complexation, and surface precipitation.

• Economic and Environmental Geology
• /
• v.44 no.2
• /
• pp.123-133
• /
• 2011

The lab scale experiments to investigate the geochemical reaction among supercritical $CO_2$-mineral-brine which occurs at $CO_2$ sequestration sites were performed. High pressurized cell system (l00 bar and $50^{\circ}C$) was designed to create supercritical $CO_2$ in the cell, simulating the sub-surface $CO_2$ storage site. From the high pressurized cell experiment, the surface changes of Ca-feldspar, amphibole (tremolite) and olivine, resulted from the supercritical $CO_2$-mineral-brine reaction, were observed and the dissolution of minerals into the brine was also investigated. The mineral slabs were polished and three locations on the surface were randomly selected for the image analysis of SPM and the surface roughness value (SRV) of those locations were calculated to quantify the change of mineral surface for 30 days. At a certain time interval, SPM images and SRVs of the same mineral surface were acquired. The secondary minerals precipitated on the mineral surfaces were also analyzed on SEM/EDS after the experiment. From the experiments, the average SRV of Ca-feldspar increased from 2.77 nm to 20.87 nm for 30 days, suggesting that the dissolution of Ca-feldspar occurs in active when the feldspars contact with supercritical $CO_2$ and brine. For the amphibole, the average SRV increased from 2.54 nm to 8.31 nm and for the olivine from 0.77 nm to 11.03 run. For the Ca-feldspar, $Ca^{2+}$, $Na^+$, $Fe^{2+}$, $Si^{4+}$, $K^+$ and $Mg^{2+}$ were dissolved in the highest order and $Si^{4+}$, $Ca^{2+}$, $Fe^{2+}$ and $Mg^{2+}$ for the amphibole. Fe (or Mg) - oxides were precipitated as the secondary minerals on the surfaces of amphibole and olivine after 30 days reaction. Results suggested that $Ca^{2+}$, $Fe^{2+}$ and $Mg^{2+}$ rich minerals would be significantly weathered when it contacts with the supercritical $CO_2$ and brine at $CO_2$ sequestration sites.

• Proceedings of the Mineralogical Society of Korea Conference
• /
• 2002.05a
• /
• pp.77-79
• /
• 2002

• Korean Journal of Soil Science and Fertilizer
• /
• v.17 no.2
• /
• pp.147-154
• /
• 1984

Two Fe-hydrous oxide A,B and one Al-hydroxide minerals were synthesized precipitating Fe $Cl_3$ and $AlCl_3$ with alkali solution(NaOH) at pH 6.0, 12.0 and 4.5 respectively, for precise understanding of physico-chemical and surface charge characteristics of soils in which these minerals are dominant. Identification of these final products, effect of free and amorphous materials on X-ray diffraction analysis, particle size distribution and surface change characterics of these minerals were performed. Fe-hydroxide A and B were identified as great deal of X-ray amorphous material and as goethite with large amount of X-ray amorphous material, respectively. Dehydration by oven at $105^{\circ}C$ of these minerals exhibited akaganeite peaks with low X-ray amorphous hump and pure goethite peaks for Fe-hydroxide A and B, respectively. Both minerals, however, turned into hematite upon firing at $550^{\circ}C$. On the other hand, Al-hydroxide identified as mixture of gibbsite and bayerite of around 7:3 ratio. Application of sodium dithionite and ammonium oxalate solutions for removal of free or amorphous Fe and Al from these minerals revealed that only peak intensities of Al-hydroxide system were enhanced upon Al-extraction by oxalate solution even though dithionite solution was much powerful to extract Fe from Fe-hydrous oxide systems. Original(wet) Fe-hydrous oxide A has the highest specific surface and surface charge development(negative and positive), and the greatest amount of less than $2{\mu}m$ sized particles. Specific surface and clay sized particles(less than $2{\mu}m$) of Fe-hydrous oxide A, however, were drastically reduced upon dehydration($P_2O_5$ and oven drying) compare to the rest minerals. The Z.P.C. of these synthetic minerals were 8.0-8.5, 7.5-8.0 and 5.5-6.0 for Fe-hydrous oxide A, B and Al-hydroxide, respectively.

• Proceedings of the Mineralogical Society of Korea Conference
• /
• 2001.06a
• /
• pp.44-44
• /
• 2001

구리(II)의 전자상자성공명 흉수선의 모양과 선 폭에 대한 해석을 통해 석영-물 계면에서의 구리(II) 및 흡착수와 석영 표면과의 상호 작용에 대해 연구하였다. 두 가지 흡수선이 중첩하여 흡수선을 구성하며 따라서 석영 표면에 적어도 두 종류의 구리(II)가 존재함을 알 수 있었다. 하나는 g=2.18에 중심을 둔 초미세 갈라짐이 분해되지 않는 등방성 단일 흡수선을 보여 주는 구리(II) 이온이다. 이는 수용액 중에서와 유사한 빠른 자유 회전 운동이 가능한 상태로 표면에 매우 약하게 결합된 구리 이온(Cu($H_2O$)$_{6}$$^{2+}$)인 것으로 해석된다. 다른 하나는 축 대칭 흡수선 $g_{∥}$=2.40, $g_{⊥}$=2.08)을 가지는 구리(II)로서 이는 표면에 강하게 결합된 것으로 해석된다. 본 결과는 흡착 현상에 대한 열역학적 접근법인 표면 착물화 모델들이 제시하는 광물 표면에서의 금속 이온 흡착 모델이 거시적 관점에서 흡착 현상을 잘 모사할지라도 분자 수준의 미시적 관점에서 흡착 메커니즘을 규명하기 위해서는 독립적인 분광학적 정보가 제시되어야함을 보여 준다.다.

• Journal of the Mineralogical Society of Korea
• /
• v.15 no.3
• /
• pp.195-204
• /
• 2002

Mineralogy and the exposed surface area are two of the most important factors controlling dissolution and weathering rates of soils. The mixture of inorganic and organic materials of various size distributions and structures that constitute soils makes the calculation of weathering rates difficult. The surface area of soil minerals plays an important role in most of programs for calculating the weathering rates and critical loads. The Brunauer-Emmett-Teller (BET) measurement is recommended for the measurement of specific surface area. However, BET values measured without organic matter removal are in fact those far all the N2-adsorbed surface areas, including the surfaces covered and aggregated with organisms. Surfaces occupied by organisms are assumed to be more reactive to weathering by organic activities. Therefore, the BET surface area difference before and after organic removal depicts the area occupied by organisms. The present study shows that the BET values after organic matter removal using $H_2$O$_2$ are larger than those without removal by 1.68~4.87 $m^2$/g. This implies that BET measurement without organic removal excludes the reactive area occupied by organisms and that the area occupied by organisms in soils is much larger than expected. It is suggested that specific surface area measurement for calculating weathering rates of mineral soils should be made before and after organic matter removal. The results of a column experiment are presented to demonstrate the potential retarding influence that this organic matter may have on mineral dissolution and weathering.

• Journal of the Mineralogical Society of Korea
• /
• v.18 no.2
• /
• pp.127-134
• /
• 2005

Although the bulk composition of materials is one of the major considerations in extractive metallurgy and environmental science, surface composition and topography control surface reactivity, and consequently play a major role in determining metallurgical phenomena and pollution by heavy metals and organics. An understanding of interaction mechanisms of different chemical species at the mineral surface in an aqueous media is very important in natural environment and metallurgical processing. X-ray photoelectron spectroscopy (XPS) has been used as an ex-situ analytical technique, but the material to be analyzed can be any size from $100\;{\mu}m$ up to about 1 cm. It can also measure mixed solids powders, but it is impossible to ascertain the original source of resulting x-ray signals where they were emitted from, since it radiates and scans the macro sample surface area. The study demonstrated the ability of TOF-SIMS to detect individual organic species on the surfaces of mineral particles from plant samples and showed that the TOF-SIMS techniques provides an excellent tool for establishing the surface compositions of mineral grains and relative concentrations of chemicals on mineral species.

• Journal of the Mineralogical Society of Korea
• /
• v.17 no.2
• /
• pp.115-121
• /
• 2004

The surface microtopography of pyrophyllite collected from the Gussi deposit, Korea was observed by mean of transmission electron microscopy (TEM) with the gold decoration technique. As results, closed step patterns with malformed circular islands were characteristically observed on the (001) surface of pyrophyllite, contrasting with spiral step patterns common in illite and kaolinite. Gussi pyrophyllite was likely crystallized from hydrothermal solution of higher temperature and/or higher supersaturation than those of other clay minerals. Comparing with micro-topographies of pyrophyllite from the Shokozan and the Uku deposits, southwest Japan, growth mechanism of Gussi pyrophyllite is almost equivalent to those from the Shokozan and the Uku deposits.

• Korean Journal of Mineralogy and Petrology
• /
• v.33 no.4
• /
• pp.463-475
• /
• 2020

Presence of microplastics in soil and groundwater has recently been reported and environmental concerns are raised as to the plastic pollution. In the subsurface environment, clay minerals and metal oxide minerals are commonly found as finely dispersed states. Because the minerals have high sorption capacities for diverse pollutants, interactions with mineral surface play an important role in the transport of microplastics in groundwater. Accordingly, environmental mineralogy investigating the interactions between microplastics and mineral surfaces is the essential research area to understand the fate and transport of microplastics in the subsurface environment. The microplastic-mineral surface research requires molecular- to nano-scale analyses to be able to probe the relatively weak interactions between them. The current report introduces a nano-scale analysis tool called quartz crystal microbalance (QCM) that can measure the sorbed/desorbed mass of nanoplastics on mineral surfaces at the level of a few nanograms (~10-9 g). This report briefly reviews the main principles in the QCM measurement and discusses applications of QCM to the environmental mineralogy research.