• Title/Summary/Keyword: 광대역 입력

Search Result 249, Processing Time 0.024 seconds

Estimation for Input Impedance of Microstrip Patch Antenna corresponding to Cutting Shape (마이크로스트립 패치 절단 모양에 따른 입력 임피던스 평가)

  • Kim, Tae Yong;Lee, Jong-Ig
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2015.05a
    • /
    • pp.480-481
    • /
    • 2015
  • General microstrip patch antenna has small bandwidth. If corner of a patch antenna is properly cutted to be triangular shape, then input impedance of patch antenna should be varied. Using this characteristic wideband patch antenna can be implemented. In this paper, wideband microstrip patch antenna operating in 2.4GHz ISM band is investigated through tracking variation of input impedance corresponding to cutting shape of patch antenna.

  • PDF

10.525 GHz Band Broadband Inset-fed Microstrip Patch Antenna (10.525 GHz 대역 광대역 인셋-급전 마이크로스트립 패치 안테나)

  • Junho Yeo;Jong-Ig Lee
    • Journal of Advanced Navigation Technology
    • /
    • v.28 no.1
    • /
    • pp.136-141
    • /
    • 2024
  • In this paper, a broadband inset-fed microstrip patch antenna operating at 10.525 GHz band was proposed. The proposed broadband inset-fed microstrip patch antenna consists of three narrow rectangular patches. At the center of the center patch, two symmetrical side patches were connected by a strip conductor and were arranged with their centers shifted in a perpendicular direction with respect to the center patch. For performance comparison, a conventional inset-fed square microstrip patch antenna was designed. Experiment results show that the frequency band of the measured input reflection coefficient with a voltage standing wave ratio less than 2 for the broadband inset-fed microstrip patch antenna was 10.036-11.051 GHz (9.63%), whereas that for the conventional inset-fed rectangular microstrip patch antenna was 10.306-10.772 GHz (4.42%). Therefore, the input reflection coefficient frequency bandwidth of the fabricated broadband inset-fed microstrip patch antenna was increased by 2.18 times, compared to the conventional inset-fed square microstrip patch antenna.

Design of Wideband Speech Coder Using the G.723-1,G.729 Combined with MLT (G.723.1,G.729 부호화기와 MLT 방법을 이용한 광대역 음성 부호화기 설계)

  • 김정중;김종학;이인성
    • Proceedings of the IEEK Conference
    • /
    • 2001.09a
    • /
    • pp.939-942
    • /
    • 2001
  • 본 논문에서는 ITU-T G.723.1, G.729 부호화기와 MLT(Modulated Lapped Transform) 방법을 이용한 광대역 음성 부호화방법을 제안한다. 제안된 광대역 음성부호화 방법은 16 kHz로 샘플링된 입력신호를 QMF(Quadrature Mirror Filter)사용하여 저대역과 고대역으로 나누며, 각 대역은 8 kHz의 샘플링을 갖는 협대역 음성 신호로 변환된다. 고대역은 MLT변환 후 벡터 양자화하며 또한 MLT를 사용한 ATC(Adaptive Transform Coding)방법을 적용하여 표현하며 저대역은 G.723.1과 G.729 부호화기를 사용한다. 설계된 광대역 음성부호화기의 성능을 평가하기 위하여 MOS (Mean Opinion score)실험을 수행하였다. MOS 실험을 통해 16 kbps G.729-MLT VQ방식이 G.722 56kbps 와 비슷한 음질을 나타내었다.

  • PDF

Characterization of Supercontinuum Generation as a function of Pump Wavelength and Intensity in Photonic Crystal Fiber (광자 결정 광섬유에서 펌프광원의 파장과 입력파워에 따른 초 광대역 광원 발생의 특성)

  • Kim, Jong-Doo;Yee, Ki-Ju;Jeon, Min-Yong;Ahn, Seong-Joon;Choi, Yong-Gyu
    • Korean Journal of Optics and Photonics
    • /
    • v.16 no.6
    • /
    • pp.490-493
    • /
    • 2005
  • We have experimentally studied supercontinuum generation in a photonic crystal fiber as a function of pump wavelength and intensity with 100 fs pulsewidth. A supercontinuum over 750 nm spectral width with amplitude variation less than 10 dB has been achieved. It was generated by coupling femtosecond pulses from a mode-locked Ti:Sapphire laser into a 2 m long photonic crystal fiber. Adjusting the parameters of the pump source, it was also possible to control different spectral features of the supercontinuum radiation.

Flourescence characteristics of the Alexandrite Laser (Alexandrite 레이저의 형광특성)

  • 윤태현
    • Proceedings of the Optical Society of Korea Conference
    • /
    • 1990.02a
    • /
    • pp.26-28
    • /
    • 1990
  • Cw arc 램프로 펌핑하는 Alexandrite 레이저의 형광을 optical Spectrum Analyzer를 이용하여 측정하였다. Vibronic 천이에 해당하는 광대역 형광 스펙트럼이 관측되었고, arc 램프 입력에 따른 peak 형광의 세기 및 peak intensity 파장의 입력 power 의존성을 조사하였다. 형광의 세기는 입력 power에 따라 0.16 /kw의 비율로 증가하였고, peak intensity 파장은 입력 power가 5kw 까지는 5 nm/kw 비율로 장파장쪽으로 이동하였다.

  • PDF

Design of the Wideband Power Amplifier for a Frequency Hopping Radio (주파수 도약 무전기용 광대역 전력증폭기 설계)

  • Lee, Min-Soo
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.7 no.2
    • /
    • pp.195-199
    • /
    • 2006
  • A wideband power amplifier for a frequency hopping radio unit is designed. To obtain higher efficiency, it is designed for the Class B mode overdrived. The broadband transformer and feedback circuits are adapted to obtain broadband characteristics. The designed amplifier is simulated using the ADS, which is a CAD software from HPEEsof, Simulation results of the designed amplifier are well suited for the design specifications. The designed amplifier are fabricated. Measured results of the fabricated amplifier well agreed with the simulation results and are in good agreement with the predicted performance.

  • PDF

16kbps Windeband Sideband Speech Codec (16kbps 광대역 음성 압축기 개발)

  • 박호종;송재종
    • The Journal of the Acoustical Society of Korea
    • /
    • v.21 no.1
    • /
    • pp.5-10
    • /
    • 2002
  • This paper proposes new 16 kbps wideband speech codec with bandwidth of 7 kHz. The proposed codec decomposes the input speech signal into low-band and high-band signals using QMF (Quadrature Mirror Filter), then AMR (Adaptive Multi Rate) speech codec processes the low-band signal and new transform-domain codec based on G.722.1 wideband cosec compresses the high-band signal. The proposed codec allocates different number of bits to each band in an adaptive way according to the property of input signal, which provides better performance than the codec with the fixed bit allocation scheme. In addition, the proposed cosec processes high-band signal using wavelet transform for better performance. The performance of proposed codec is measured in a subjective method. and the simulations with various speech data show that the proposed coders has better performance than G.722 48 kbps SB-ADPCM.

Multi Rate Wideband Speech Coder with the AMR Speech Coder and MLT-VQ (AMR부호화기와 MLT-VQ방법을 이용한 다전송률 광대역 음성부호화기)

  • 김은주;이인성
    • Proceedings of the IEEK Conference
    • /
    • 2001.09a
    • /
    • pp.809-812
    • /
    • 2001
  • 본 논문에서는 AMR(Adaptive Multi-Rate)과 MLT (Modulated Lapped Transform) 벡터 양자화 방법을 이용하여 광대역 음성부호화기를 설계하였다. 제안한 음성부호화 알고리즘은 split-band 구조를 가지고 있으며 16kHz로 샘플링 된 신호를 입력받아 QMF 필터에 의해 두 개의 대역으로 나누어, 각각 8kHz 샘플링 신호로 변환시킨 후 저대역(0Hz-3400Hz)의 신호와 고대역(3400Hz -7000Hz)의 신호로 나누어 각각 부호화한다. 나누어진 두 개의 협대역 음성신호는 AMR(Adaptive Multi-Rate)부호화기와 MLT (Modulated Lapped Transform)벡터 양자화 방법을 사용하여 각각 부호화되어 전송된다. 수신단에서는 각 대역을 AMR과 IMLT(Inverse MLT) 벡터 양자화 방법으로 역부호화하여 음성신호를 합성한다. 제안한 음성부호화기는 20.2kbps에서 12.15kbps까지의 다전송률로 동작된다. 설계된 광대역 음성부호화기는 MOS시험 결과로부터 G.722의 56 kbps 음성이 설계된 코더의 20.2 kbps와 비슷한 음질을 갖음을 확인할 수 있었다.

  • PDF

Design of Multi Rate Wideband Speech Coder Using the AMR(Adaptive Multi-Rate) Coder (AMR 부호화기와 결합된 다전송률 광대역 음성부호화기 설계)

  • 김은주;이호창;이인성
    • Proceedings of the IEEK Conference
    • /
    • 2000.09a
    • /
    • pp.755-758
    • /
    • 2000
  • 본 논문에서는 AMR(Adaptive Multi-Rate)를 이용하여 광대역 음성부호화기를 설계하였다. 16kHz로 샘플링 된 입력 신호를 QMF 필터에 의해 두 개의 대역으로 나누어, 각각 decimation하여 두 개의 8kHz 샘플링 신호로 변환시킨 후 저대역(0Hz-3400Hz)의 신호와 고대역(3400Hz -7000Hz)의 신호로 나누어 각각 부호화한다. 나누어진 두 개의 협대역 음성신호는 AMR(Adaptive Multi-Rate)과 ATC(Adaptive Transform Coding)을 사용하여 각각 부호화되어 전송된다. 두 대역으로부터 부호화된 정보는 20.2kbps에서 12.75kbps까지의 전송률을 갖고, 수신단에서는 각 대역을 AMR과ATC방법으로 역부호화하여 음성신호를 합성한다. 설계된 광대역 음성부호화기의 성능을 평가하기 위해 ITU-T의 표준안인 G.722를 포함하여 MOS 시험을 하였다.

  • PDF

Design of Multi Rate Wideband Speech Coder Using the AMR(Adaptive Multi-Rate) Coder (AMR 부호화기와 결합된 다전송률 광대역 음성부호화기 설계)

  • 김은주;이인성
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.26 no.5B
    • /
    • pp.632-638
    • /
    • 2001
  • 본 논문에서는 AMR(Adaptive Multi-Rate)를 이용하여 광대역 음성부호화기를 설계하였다. 16kHz로 샘플링된 입력 신호를 QMF 필터에 의해 두 개의 대역으로 나누어, 각각 decimation하여 두 개의 8kHz 샘플링 신호로 변환시킨 후 저대역(0Hz-3400Hz)의 신호와 고대역(3400Hz∼7000Hz)의 신호로 나누어 각각 부호화한다. 나누어진 두 개의 협대역 음성신호는 AMR(Adaptive Multi-Rate)과 ATC(Adaptive Transform Coding)을 사용하여 각각 부호화되어 전송된다. 두 대역으로부터 부호화된 정보는 20.2kbps에서 12.75kbps까지의 전송률을 갖고, 수신단에서는 각 대역을 AMR과 ATC 방법으로 역부호화하여 음성신호를 합성한다. 설계된 광대역 음성부호화기의 성능을 평가하기 위해 ITU-T의 표준안인 G.722를 포함하여 MOS 시험을 하였다.

  • PDF