• Title/Summary/Keyword: 관측기설계

Search Result 376, Processing Time 0.03 seconds

Observer Design for H- Fault Detection of Large Scale T-S Fuzzy Systems (대규모 T-S 퍼지 시스템의 H- 고장검출을 위한 관측기 설계)

  • Jee, Sung-Chul;Lee, Ho-Jae;Joo, Young-Hoon;Kim, Do-Wan
    • Journal of the Korean Institute of Intelligent Systems
    • /
    • v.20 no.1
    • /
    • pp.15-20
    • /
    • 2010
  • In this paper, we discuss a decentralized observer design problem for the fault detection in the large-scale continuous-time T-S (Takagi-Sugeno) fuzzy system. Since the fault detection residual is desired to be as sensitive as possible, on the fault, we use $\mathfrak{H}_-$ index performance criterion. Sufficient conditions for the existence of such a observer is presented in terms of linear matrix inequalities. Simulation results show the effectiveness of the proposed method.

Lyapunov Based Stability Analysis and Design of A Robust High-Gain Observer (강인한 고이득 관측기 설계 및 안정성 해석)

  • Yu, Sung-Hoon;Hyun, Chang-Ho
    • Journal of the Institute of Electronics Engineers of Korea SC
    • /
    • v.47 no.2
    • /
    • pp.8-15
    • /
    • 2010
  • This paper proposes a robust high-gain observer design scheme for nonlinear systems and its stability is analyzed based on Lyapunov theory. It is assumed that their states are unmeasurable. The proposed high-gain observer has the integrator of the estimation error in dynamics. It improves the performance of high-gain observers and makes the proposed observer robust to noisy measurements, uncertainties and peaking phenomenon as well. Its stability is analyzed by the Lyapunov approach. In order to verify the effectiveness of the proposed scheme, it is applied to output feedback controllers and some comparative simulation result with the existed observer based output feedback controllers and state feedback controllers is given.

A Nonlinear Observer Design for Estimating State-of-Charge of Lithium Polymer Battery (리튬폴리머 배터리 잔존충전용량 추정을 위한 비선형 관측기 설계)

  • Yoo, Seog-Hwan
    • Journal of the Korean Institute of Intelligent Systems
    • /
    • v.22 no.3
    • /
    • pp.300-304
    • /
    • 2012
  • This paper presents a nonlinear observer design method for SOC(state-of-charge) estimation of Lithium polymer battery cell. The dynamic equation of the battery cell is modeled as a simple RC electrical circuit with a nonlinear voltage source and the parameters are obtained via nonlinear optimization. Using the sum of squares decomposition, the observer gain is designed such that the error dynamics is asymptotically stable and the decay rate is below the prescribed value. In order to illustrate the performance of the observer, a computer simulation is performed using the experimental data with the UDDS(urban dynamometer driving schedule) current profile.

Design of Disturbance Observer Using a Second-Order Plus Dead Time Modeling Technique (시간 지연을 갖는 2차 시스템 근사를 이용한 외란 관측기 설계)

  • Jeong, Goo-Jong;Son, Young-Ik;Jeong, Yu-Seok
    • Proceedings of the KIEE Conference
    • /
    • 2008.07a
    • /
    • pp.1501-1502
    • /
    • 2008
  • 제어대상 시스템에 시간지연과 외란이 동시에 존재하는 경우, 스미스 예측기와 외란 관측기를 함께 사용하면 시간지연과 외란으로 인한 시스템의 성능저하를 완화할 수 있다. 하지만 시간지연이 유동적인 경우에는 설계된 스미스 예측기와 외란 관측기의 역할을 기대하기 어렵다. 본 논문은 시간지연을 갖는 2차 시스템 모델링 기법에 기반한 PID 제어기를 이용하여 시간 지연의 유동성에 대해 스미스 예측기와 외란 관측기의 강인성을 향상시키는 방법을 제안한다.

  • PDF

The state-of-Health estimation technique using dual sliding mode observer for hybrid electric vehicle lithium battery (듀얼 슬라이딩 모드 관측기를 사용한 하이브리드 자동차용 리튬 배터리의 수명 예측 기법)

  • Kim, Il-Song;Lhee, Chin-Gook
    • Proceedings of the KIEE Conference
    • /
    • 2007.10a
    • /
    • pp.137-138
    • /
    • 2007
  • 하이브리드 자동차용 리듐 배터리의 수명을 예측하기 위한 듀얼 슬라이딩 모드 관측기를 설계하는 방법에 대해서 논의한다. 단순화된 R-C 모델을 사용하여 리듐 배터리를 전기적으로 모델링하고, 듀얼 슬라이딩 모드 관측기를 설계하는 방법에 대해서 순차적으로 서술한다. 제안된 시스템의 구조는 단순하고 구현이 쉬운 장점이 있으며, 외란에 대해서 강인하다는 특징도 가지고 있다. Lyapunov 조건에 의한 관측기의 수렴성이 증명되고 시스템의 성능은 UDDS(Urban dynamometer driving schedule) 시험에 의해서 입증되었다. 제안된 시스템은 실제 주행 상황에서도 짧은 계산시간과 뛰어난 추적 성능을 보여주었다.

  • PDF

Fuzzy Observer Design for Mobile Robot (이동로봇을 위한 퍼지관측기 설계)

  • Kim, Jin-Hwan;Kim, Sang-Uk;Lee, Young-Gun;Kim, Bo-Youl;Kim, Young-Bong
    • Proceedings of the KIEE Conference
    • /
    • 2003.07e
    • /
    • pp.103-105
    • /
    • 2003
  • 본 논문에서는 이동로봇의 마찰력 보상을 위해 퍼지 외란 관측자를 설계한다. 이동로봇은 주행 바닥면에 따라 주행 특성이 달라질 수 있다. 주행 중 발생하는 마찰력은 비선형적인 특성을 가지므로 이에 검출할 수 있는 퍼지 관측기를 설계하도록 한다. 설계된 퍼지 관측기를 적용함으로써 주행 바닥 면의 상태에 따라 발생하는 마찰력의 영향을 최소화시킴으로써 주행 특성을 효과적으로 개선시킬 수 있다.

  • PDF

RCGA-Based States Observer Design of Container Crane concerned with Design Specification (설계사양을 고려한 컨테이너 크레인의 RCGA기반 상태 관측기 설계)

  • Lee, Soo-Lyong;Ahn, Jong-Kap;Lee, Yun-Hyung;Son, Jeong-Ki;So, Myung-Ok
    • Journal of Navigation and Port Research
    • /
    • v.32 no.10
    • /
    • pp.851-856
    • /
    • 2008
  • Construction of large-scale container ports with the productivity improvements in container cranes shortened time of staying port to increase the level of service it harbors efforts accelerated. About container crane system exerted on the input, which is designed to look good performance considering the states feedback control system. The states observer designed of container cranes state variables that are expected to measurement noise or particular measurement signal. In the status of existing research, the feedback gain matrix and the state observer gain matrix are searched by being separated solving. But the feedback gain matrix and the state observer gain matrix are searched by RCGAs at once that be used robust search method in this paper.

Design of Nonlinear Unknown Input Observer by SDRE Method and Fault Detection of Reaction Wheels (SDRE 기법을 이용한 비선형 미지입력 관측기 설계와 반작용 휠의 고장 검출)

  • Yoon, Hyungjoo;Jin, Jaehyun
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.41 no.4
    • /
    • pp.284-290
    • /
    • 2013
  • The authors propose a nonlinear unknown input observer to estimate the angular speed of a satellite and to detect faults of reaction wheels. Input values are necessary to estimate the angular speed. Therefore, estimation errors are inevitable if faults occur in actuators or reaction wheels. Unknown input observers are useful to estimate the states of a system without being affected by unknown faults. The authors have designed a nonlinear unknown input observer by using the SDRE method and verified the proposed observer via numerical simulations. In spite of various and simultaneous faults, we have estimated the states and detected faults exactly by the proposed nonlinear unknown input observer.

Observer-Based Output Feedback Stochastic Stabilization for T-S Fuzzy Systems with Input Delay (입력지연을 갖는 T-S 퍼지 시스템의 관측기기반 출력궤환 확률적 안정화)

  • Lee, Sang In;Park, Jin Bae;Joo, Young Hoon
    • Journal of the Korean Institute of Intelligent Systems
    • /
    • v.14 no.3
    • /
    • pp.298-303
    • /
    • 2004
  • This paper deals with a stochastic stabilization of observer-based output-feedback control Takagi-Sugeno (T-S) fuzzy system with Markovian input delay. The finite Markovian process is adopted to model the input delay of the overall control system. It is assumed that the zero and hold devices are used for control input. The continuous-time T-S fuzzy system with the Markovian input delay is discretized for easy handling delay, accordingly, the discretized T-S fuzzy system is represented by a discrete-time T-S fuzzy system with jumping parameters. The stochastic stabilizability of the jump T-S fuzzy system is derived and formulated in terms of linear matrix inequalities (LMIs). The usefulness of the proposed algorithm is also certificated by simulation of 2 degree of freedom helicopter model.

Design of control system with two degrees of freedom based on the disturbance observer (외란관측기 기반한 2 자유도 제어계의 설계)

  • Ha, Hong-Gon
    • Journal of the Institute of Convergence Signal Processing
    • /
    • v.11 no.1
    • /
    • pp.74-79
    • /
    • 2010
  • Many control techniques have been purposed in order to improve the control performances of the control system. The freedom on control in the control system is decided by the number of the closed-loop transfer function which can adjust independently. The design method of the controller with two degrees of freedom(TDOF) is used extensively for following the desired value and rejecting the disturbance. In this paper, the control system with the disturbance observer(DOB) for rejecting the disturbance is transformed by the control system with TDOF and the rejection of a transient response is easy at the starting time and load variation. The design method of the DOB is proposed in the frequency-domain and the control system with TDOF is constructed by using the DOB which is designed with this method. Through the simulation results, the usefulness of the proposed algorithm is proved.