• Journal of the Korean Institute of Intelligent Systems
• /
• v.23 no.1
• /
• pp.12-17
• /
• 2013

This paper presents a model of bipedal leg mechanism with a compliant foot, and the contact repulsion of the foot for a typical walking pattern and its influence on the knee and hip joints of the leg will be analyzed. This analysis is useful for us to figure out the physical impact of the foot when a walking robot takes a step. Also it can be applied to determine the joint specification of the leg mechanism. As a result, it is shown that the compliance characteristics of a robotic foot can contribute to alleviate the joint torques of the leg affected by the contact repulsion of the foot.

• Journal of Biomedical Engineering Research
• /
• v.22 no.6
• /
• pp.543-550
• /
• 2001

In this study, ground reaction force(GRF) and energy consumption of fixed. single-axis and multi-axis Prosthetic ankle assemblies were investigated to show the biomechanical evaluation for trans-tibial amputees. In the experiments. two male and two female trans-tibial amputees were tested with fixed, sin91e-axis and multi-axis Prosthetic ankle assembly. A three-dimensional gait analysis was carried out to derive the ratio of GRF to weight as the percentage of total stance Phase for nine Points Energy consumption of each Prosthetic ankle assembly was measured while subjects walked at 2km/h. 3km/h and the most comfortable walking speed on the treadmill The results showed that multi-axis ankle was superior to the other two ankle assemblies for the characteristic of forwarding and breaking forces. Fixed ankle was relatively superior to the other two ankle assemblies for gait balancing and movement of the center fur mass Compared to the other ankle assembly. sing1e-axis type showed lower energy consumption over 2.3km/h walking speed .

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.1160-1165
• /
• 2004

The purpose of this study was to calculate three dimensional angular displacements, moments and joint reaction forces of the ankle joint during the waist pulling, and to assess the ankle joint reaction forces according to different perturbation modes and different levels of perturbation magnitude. Ankle joint model was assumed 3-D ball and socket joint which is capable of three rotational movements. We used 6 cameras, force plate and waist pulling system. Two different waist pulling systems were adopted for forward sway with three magnitudes each. From motion data and ground reaction forces, we could calculate 3-D angular displacements, moments and joint reaction forces during the recovery of postural balance control. From the experiment using falling mass perturbation, joint moments were larger than those from the experiment using air cylinder pulling system with milder perturbation. However, JRF were similar nevertheless the difference in joint moment. From this finding, we could conjecture that the human body employs different strategies to protect joints by decreasing joint reaction forces, like using the joint movement of flexion or extension or compensating joint reaction force with surrounding soft tissues. Therefore, biomechanical analysis of human ankle joint presented in this study is considered useful for understanding balance control and ankle injury mechanism.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.2
• /
• pp.424-433
• /
• 2019

The purpose of this study was to investigate the effects of gender difference in injury experience on biomechanical variables of lower extremity during two leg drop landing. 20 male(injury experience=8, non-injury experience=12) and 20 female(injury experience=11, non-Injury Experience=9) in their 20's were selected as subjects. Two-way mixed ANOVA was performed on the biomechanical variables obtained from the two leg drop landing in a 45cm height box and post-test was performed with bonferroni adjustment(p <.05). The results of this study suggest that the group of female who injury experience could induce the reduction of the peak vertical ground reaction force by increasing the valgus and internal rotation of the knee joint and flexion and internal rotation of the hip joint. In the INE(injury non-experienced) female group, the peak knee flexion angle was the smallest, as well as the flexion of the hip joint and the external rotation angle, and the peak vertical ground reaction force was the highest. On the other hand, the INE female group showed high vertical ground reaction force because they did not utilize the knee and hip joints relatively than the IE(injury experienced) female group, this means that it is relatively exposed to the risk of injury. Therefore, it was found that gender difference in injury experience is a factor affecting factors of knee and hip joint movement and peak vertical GRF(ground reaction force).

• Journal of Biomedical Engineering Research
• /
• v.25 no.4
• /
• pp.301-307
• /
• 2004

An inverse dynamic model of lower limbs is presented to calculate joint moments during gait. The model is composed of 4 segments with 3 translational joints and 12 revolute joints. The inverse dynamic method is based on Newton-Euler formalism. Kinematic data are obtained from 3 dimensional trajectories of markers collected by a motion analysis system. External forces applied on the foot are measured synchronously using force plate. The use of developed model makes it possible to calculate joint moments for variation of parameters.

• Journal of Biomedical Engineering Research
• /
• v.24 no.3
• /
• pp.209-215
• /
• 2003

The goal of this study was to investigate the relationship between kinematic and kinetic characteristics of foot joints resisting ground reaction force. Passive elastic joint moment and angular displacement were obtained from the experiment using 3 cameras and force plate. The relationship between joint angle and moment was mathematically modeled by using least square method. The ranges of motion of joints ranged from 5$^{\circ}$ to 7$^{\circ}$ except metatarsophalangeal joint. In the study, we presented simple mathematical models that could relate joint angle and plantar pressure. From this model, we can got the kinematic data of joints which is not available from conventional motion analysis. Furthermore, the model can be used not only for biomechanical model which simulates gait but also for clinical evaluation.

• Physical Therapy Korea
• /
• v.8 no.4
• /
• pp.17-29
• /
• 2001

발목에 대한 유착성 테이핑의 적용은 물리치료 분야와 운동 트레이닝 분야에서의 일반적인 치료 접근 방법이라 할 수 있다. 즉 발목 염좌 같은 손상을 예방하기 위한 방법과 재활의 부가적인 치료 형태로 이용될 수 있는 것이다. 본 연구는 발목의 테이핑과 트레드밀에서의 30분간 보행이 수직 착지 동작 동안 하지의 운동 역학적 요소들에 어떠한 영향을 주는지 알아보기 위해 시행되었다. 14명의 신체 건강한 대상자들 (남:10, 여:4)이 본 연구에 참여하였다. 한발로 서있는 동안 40 cm의 높이로 뛰게 하였다. 가자미근, 전경골근, 안쪽넓은근, 넙다리 두갈래근에 근전도 전극이 부착되었다. 테이핑된 신체 부위로 착지하는 동안 근전도와 힘판(force plate) 자료가 500 Hz의 주파수로 수집되었다. 대상자들의 우세쪽 하지 발목에 테이핑을 하였고, 대상자는 한발로 뛰어 내리는 동작을 반복하였다. 트레드밀에서 30분 동안 발목에 테이핑을 한 채로 보행하였고 이후 한발로 뛰어 내리는 동작을 반복하여 수행하였다. 테이핑을 적용한 상태와 테이핑한 채로 30분 동안 트레드밀에서 걷기 운동을 한 조건에서 수직 지면 반발력의 통계학적으로 유의미한 증가가 있었다. 착지 동안에 네 가지 상황에서의 최대 내측 가속도의 유의한 차이가 있었고, 그 차이는 테이핑 전과 테이핑을 한 채로의 운동 조건에서 유의한 차이가 있었다. 테이핑한 상태에서 가자미근은 접촉되는 착지 순간부터 최대 수직 지면 반발력이 나타나는 동안의 평균 근전도의 수치에 있어서 유의한 감소가 있었다. 반면에 다른 근육들에서는 아무런 변화를 보이지 않았다. 비록 발목 테이핑이 발목 손상의 위험을 줄이는데 효과적이라고 일반적으로 인식되고 있으나 이번 실험의 결과는 30분 동안의 트레드밀에서의 보행 후 테이핑은 발목의 움직임을 제한하는 효과는 있지만 한편으로는 가자미근의 활동을 감소시키는 것을 보여주었다. 따라서 이 연구의 결과는 테이핑을 하면 점프와 착지로 이어지는 동작 중에 발목관절 손상 위험을 증가시킬 가능성이 있음을 보여주었다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.6
• /
• pp.535-540
• /
• 2015

The location of the pivot between the backrest and seat pan of a reclining chair should be identical to the hip joint center to prevent unpleasant user experiences during tilting motion. However, mechanical friction occurs in the pin-in-slot joints that are installed under the seat pan as an alternative to the hinge joint. This reduces the reaction force between the backrest and the occupant's back when reclining and returning to an upright position, which causes the occupant's discomfort. In this study, bearings, rollers, and sliders were suggested as alternatives for the pin component, and the percentage of the reaction force on the backrest was measured while reclining the backrest and subsequently returning it to an upright position. The results show when bearings, rollers, and sliders were used for the pin-in-slot joint, the percentages of the reaction force were $59.7{\pm}10.3$, $47.2{\pm}13.6$, and $30.3{\pm}18.1$, respectively, indicating that the friction of the bearing was the lowest among the three pin components. Because the three alternatives have different manufacturing costs, synthetic judgment requires the consideration of not only mechanical friction but also user experience.

• Journal of the Korean Applied Science and Technology
• /
• v.37 no.3
• /
• pp.509-515
• /
• 2020

The purpose of this study was to analyze the correlation between passive ankle movement range and knee joint kinetic variables during squat movement. In this study, a total of 27 subjects participated in this study, 19 men and 8 women, who had no history of the musculoskeletal system of the lower extremity. To verify the correlation between the ankle joint flexibility and the knee joint kinetic variables during deep squat, it was performed pearson's correlation coefficient and variables showing statistically significant correlation were performed by simple regression analysis at a significant level of α .05. Through this study, the relationship between the peak joint moment and joint reaction force factors that determine ankle joint flexibility and knee joint pressure was confirmed. Therefore, when applying an exercise that can generate a lot of load on the knee joint such as deep squats during strength training, checking the degree of flexibility of the ankle joint among physical characteristics to the individual may reduce the stability of the body and the risk of injury to the knee joint. It is expected to be helpful in setting the intensity of exercise that can be done.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.5 s.170
• /
• pp.197-204
• /
• 2005

In this study, ground reaction force(GRF), absolute symmetry index(ASI) and coefficient of variation(CV) of fixed, single-axis and multi-axis prosthetic ankle assemblies were investigated to show the biomechanical evaluation for above knee amputees. In the experiments, 37 normal male volunteers, two male and two female AK amputees were tested with fixed, single-axis and multi-axis prosthetic ankle assembly. A gait analysis was carried out to derive the ratio of GRF to weight as the percentage of total stance phase for ten points. The results showed that fixed-axis ankle was superior to the other two ankle assemblies for the characteristic of forwarding and breaking forces. Multi-axis ankle was relatively superior to the other two ankle assemblies for gait balancing and movement of the center for mass. single-axis ankle was relatively superior to the other two ankle assemblies for CV and ASI of GRF.