• The Korean Journal of Franchise Management
• /
• v.2 no.1
• /
• pp.173-199
• /
• 2011

A franchisee has to depend on the overall system, such as knowhow and management support, from a franchisor in the franchise system and the two parties do not start with the same position in economic or information power because the franchisor controls or supports through selling or management styles. For this, unfair trades the franchisor's over controlling and limiting the franchisee might occur and other side effects by the people who give the franchisee scam trades has negatively influenced on the development of franchise industry and national economy. So, the purpose of this study is preventing unfair trade for the franchisee from understanding the causes and problems of dispute between the franchisor and the franchisee focused on the dispute cases submitted the Korea Fair Trade Mediation Agency and seeking ways to secure the transparency of recruitment process and justice of franchise management process. The results of the case analysis are followed; first, affiliation contracts should run on the franchisor's exact public information statement and the surely understanding of the franchisee. Secondly, the franchisor needs to use their past experiences and investigated data for recruiting franchisees. Thirdly, in the case of making a contract with the franchisee, the franchisor has to make sure the business area by checking it with franchisee in person. Fourthly, the contracts are important in affiliation contracts, so enacting the possibility of disputes makes the disputes decreased. Fifthly, lots of investigation and interests are needed for protecting rights and interests between the franchisor and franchisee and preventing the disputes by catching the cause and more practical solutions of the disputes from the government.

• Journal of Korean Academy of Dental Administration
• /
• v.5 no.1
• /
• pp.22-30
• /
• 2017

Objective: The purpose is to study the factors to impact on the satisfaction of field practice among dental hygiene students and to provide the basic data for the quality improvement of the field practices for dental hygiene students. Methods: A self-reported questionnaires were filled out by 108 dental hygiene students in C city. Questionnaires were composed with the general characteristics, satisfaction to major, and satisfaction to field clinical practice. The data was analyzed by chi-square statistics using SPSS 20.0 program. Results: The higher satisfaction to communication with professor or seniors in department was associated with the higher satisfaction to field clinical practice (p<0.05). The higher satisfaction to field clinical practice hours per week was associated with the higher satisfaction to field clinical practice (p<0.05). The higher interest to major subjects and the satisfaction to the laboratory environment were associated with the higher satisfaction to field clinical practice (p<0.05). Conclusions: The higher satisfaction to major was associated with the higher satisfaction to field clinical practice. Therefore, the systematic curriculum development is needed to improve the satisfaction with major and clinical practice.

• Journal of Space Technology and Applications
• /
• v.3 no.2
• /
• pp.118-143
• /
• 2023

Space is becoming more commercialized. Despite of its delayed start-up, space activities in Korea are attracting more nation-wide supports from both investors and government. May 25, 2023, KSLV II, also called Nuri, successfully transported, and inserted seven satellites to a sun-synchronous orbit of 550 km altitude. However, Starlink has over 4,000 satellites around this altitude for its commercial activities. Hence, it is necessary for us to constantly monitor the collision risks of these satellites against resident space objects including Starlink. Here we report a quantitative research output regarding the conjunctions, particularly between the Nuri satellites and Starlink. Our calculation shows that, on average, three times everyday, the Nuri satellites encounter Starlink within 1 km distance with the probability of collision higher than 1.0E-5. A comparative study with KOMPSAT-5, also called Arirang-5, shows that its distance of closest approach distribution significantly differs from those of Nuri satellites. We also report a quantitative analysis of collision-avoiding maneuver cost of Starlink satellites and a strategy for Korea, being a delayed starter, to speed up to position itself in the space leading countries. We used the AstroOne program for analyses and compared its output with that of Socrates Plus of Celestrak. The two line element data was used for computation.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.33 no.2
• /
• pp.83-90
• /
• 2023

The β-Ga₂O₃ has the most thermodynamically stable phase, a wide band gap of 4.8~4.9 eV and a high dielectric breakdown voltage of 8MV/cm. Due to such excellent electrical characteristics, this material as a power device material has been attracted much attention. Furthermore, the β-Ga₂O₃ has easy liquid phase growth method unlike materials such as SiC and GaN. However, since the grown pure β-Ga₂O₃ single crystal requires the intentionally controlled doping due to a low conductivity to be applied to a power device, the research on doping in β-Ga₂O₃ single crystal is definitely important. In this study, various source powders of un-doped, Sn 0.05 mol%, Sn 0.1 mol%, Sn 1.5 mol%, Sn 2 mol%, Sn 3 mol%-doped Ga₂O₃ were prepared by adding different mole ratios of SnO₂ powder to Ga₂O₃ powder, and β-Ga₂O₃ single crystals were grown by using an edge-defined Film-fed Growth (EFG) method. The crystal direction, crystal quality, optical, and electrical properties of the grown β-Ga₂O₃ single crystal were analyzed according to the Sn dopant content, and the property variation of β-Ga₂O₃ single crystal according to the Sn doping were extensively investigated.

• Journal of Food Hygiene and Safety
• /
• v.38 no.1
• /
• pp.1-11
• /
• 2023

Skin sanitizers are effective in killing or removing pathogenic microbial contaminants from the skin of food handlers, and the progressive growth of consumer interest in personal hygiene tends to drive product diversification. This review covers the advances in the application of efficacy tests for hand sanitizers to suggest future perspectives to establish an assessment system that is optimized to each product type (gel, liquid, and wipes). Previous research on the in vivo simulative test of actual consumer use has adopted diverse experimental conditions regardless of the product type. This highlights the importance of establishing optimal test protocols specialized for the compositional characteristics of sanitizers through the comparative analysis of test methods. Although the operational conditions of the mechanical actions associated with wiping can affect the efficacy of the removal and/or the inactivation of target microorganisms from the skin's surface, currently there is a lack of standardized use patterns for the exposure of hand sanitizing wipes to skin. Thus, major determinants affecting the results from each step of the overall assessment procedures [pre-treatment - exposure of sanitizers - microbial recovery] should be identified to modify current protocols and develop novel test methods. The ex vivo test, designed to overcome the limited reproducibility of in vivo human trials, is also expected to replicate the environment for the contact of sanitizers targeting skin microorganisms. Recent progress in the area of skin microbiome research revealed distinct microbial characteristics and distribution patterns after the application of sanitizers on hands to establish the test methods with the perspectives on the antimicrobial effects at the community level. The future perspectives presented in this study on the improvement of efficacy test methods for hand sanitizers can also contribute to public health and food safety through the commercialization of effective sanitizer products.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.3A
• /
• pp.201-209
• /
• 2010

Generally, PSC girder bridge uses total gross cross section to resist applied loads unlike reinforced concrete member. Also, it is used as short and middle span (less than 30 m) bridges due to advantages such as ease of design and construction, reduction of cost, and convenience of maintenance. But, due to recent increased public interests for environmental friendly and appearance appealing bridges all over the world, the demands for longer span bridges have been continuously increasing. This trend is shown not only in ordinary long span bridge types such as cable supported bridges but also in PSC girder bridges. In order to meet the increasing demands for new type of long span bridges, PSC hollow box girder with H-type steel as compression reinforcements is developed for bridge with a single span of more than 50 m. The developed PSC girder applies compressive prestressing at H-type compression reinforcements using unbonded PS tendon. The purpose of compressive prestressing is to recover plastic displacement of PSC girder after long term service by releasing the prestressing. The static test composed of 4 different stages in 3-point bending test is performed to verify safety of the bridge. First stage loading is applied until tensile cracks form. Then in second stage, the load is removed and the girder is unloaded. In third stage, after removal of loading, recovery of remaining plastic deformation is verified as the compressive prestressing is removed at H-type reinforcements. Then, in fourth stage, loading is continued until the girder fails. The experimental results showed that the first crack occurs at 1,615 kN with a corresponding displacement of 187.0 mm. The introduction of the additional compressive stress in the lower part of the girder from the removal of unbonded compressive prestressing of the H-type steel showed a capacity improvement of about 60% (7.7 mm) recovery of the residual deformation (18.7 mm) that occurred from load increase. By using prestressed H-type steel as compression reinforcements in the upper part of cross section, repair and rehabilitation of PSC girders are relatively easy, and the cost of maintenance is expected to decrease.

• Korean Journal of Environment and Ecology
• /
• v.37 no.2
• /
• pp.151-162
• /
• 2023

This study investigated the characteristics of fish communities and inhabiting status of the endangered species, Rhodeus pseudosericeus, in the Geumdang Stream in Korea from March to October 2021. A total of 1,698 fish in 5 families and 25 species were collected from 7 survey stations during the survey period. The dominant species was Zacco platypus (relative abundance, 46.5%), and the subdominant species was Squalidus gracilis majimae (16.7%), followed by Rhynchocypris oxycephalus (12.0%), Z. koreanus (5.7%), Pungtungia herzi (3.2%), R. pseudosericeus (2.0%), R. notatus (1.9%), and Acheilognathus rhombeus (1.8%). Nine Korean endemic species (36.0%) were collected, including R. pseudosericeus, R. uyekii, Sarcocheilichthys variegatus wakiyae, Microphysogobio yaluensis, S. gracilis majimae, Z. koreanus, Cobitis nalbanti, Iksookimia koreensis, and Odontobutis interrupta. An exotic species, Micropterus salmoides, designated as an invasive alien species (IAS), was collected downstream. The investigation of the habitat patterns of the endangered species (class II), Rhodeus pseudosericeus, showed a habitat range of about 6 to 7 km in the middle of Geumdang Stream (RP-1 to RP-4), and this species inhabited the edge with water depths of 0.3 through 1.0 m with slow water flow and many aquatic plants. According to the community analysis results, the overall dominance and evenness indexes were low, while diversity and richness indexes were high, and the cluster structure was largely divided into upstream and middle-downstream areas. The river health (fish assessment index) evaluated using fish was assessed as good (3 stations), normal (3 stations), and bad (1 station), and water quality was evaluated as good both upstream and downstream. Compared to previous studies, the number of species was relatively similar, and among the species that appeared in the past, 13 species did not appear in this survey, while 6 species appeared for the first time in this survey. Disturbance factors included river construction, many weirs, and the appearance of the ecosystem-disturbing species, M. salmoides. Since Geumdang Strem has high conservation value because it is home to many species in the Acheilognathinae subfamily, including the endangered species R. pseudosericeus, continuous attention and systematic conservation measures are required.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.6C
• /
• pp.395-406
• /
• 2006

Drilled shafts are a common foundation solution for large concentrated loads. Such piles are generally constructed by drilling through softer soils into rock and the section of the shaft which is drilled through rock contributes most of the load bearing capacity. Drilled shafts derive their bearing capacity from both shaft and base resistance components. The length and diameter of the rock socket must be sufficient to carry the loads imposed on the pile safely without excessive settlements. The base resistance component can contribute significantly to the ultimate capacity of the pile. However, the shaft resistance is typically mobilized at considerably smaller pile movements than that of the base. In addition, the base response can be adversely affected by any debris that is left in the bottom of the socket. The reliability of base response therefore depends on the use of a construction and inspection technique which leaves the socket free of debris. This may be difficult and costly to achieve, particularly in deep sockets, which are often drilled under water or drilling slurry. As a consequence of these factors, shaft resistance generally dominates pile performance at working loads. The efforts to improve the prediction of drilled shaft performance are therefore primarily concerned with the complex mechanisms of shaft resistance development. The shaft resistance only is concerned in this study. The nature of the interface between the concrete pile shaft and the surrounding rock is critically important to the performance of the pile, and is heavily influenced by the construction practices. In this study, the influences of asperity characteristics such as the heights and angles, the strength characteristics and elastic constants of surrounding rock masses and the depth and length of rock socket, et. al. on the shaft resistance of drilled shafts are investigated from elasto-plastic analyses( FLAC). Through the parametric studies, among the parameters, the vertical stress on the top layer of socket, the height of asperity and cohesion and poison's ratio of rock masses are major influence factors on the unit peak shaft resistance.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.3A
• /
• pp.297-307
• /
• 2010

Recently, maintenance engineering and technology for civil and building structures have begun to draw big attention and actually the number of structures that need to be evaluate on structural safety due to deterioration and performance degradation of structures are rapidly increasing. When stiffness is decreased because of deterioration of structures and member cracks, dynamic characteristics of structures would be changed. And it is important that the damaged areas and extent of the damage are correctly evaluated by analyzing dynamic characteristics from the actual behavior of a structure. In general, typical measurement instruments used for structure monitoring are dynamic instruments. Existing dynamic instruments are not easy to obtain reliable data when the cable connecting measurement sensors and device is long, and have uneconomical for 1 to 1 connection process between each sensor and instrument. Therefore, a method without attaching sensors to measure vibration at a long range is required. The representative applicable non-contact methods to measure the vibration of structures are laser doppler effect, a method using GPS, and image processing technique. The method using laser doppler effect shows relatively high accuracy but uneconomical while the method using GPS requires expensive equipment, and has its signal's own error and limited speed of sampling rate. But the method using image signal is simple and economical, and is proper to get vibration of inaccessible structures and dynamic characteristics. Image signals of camera instead of sensors had been recently used by many researchers. But the existing method, which records a point of a target attached on a structure and then measures vibration using image processing technique, could have relatively the limited objects of measurement. Therefore, this study conducted shaking table test and field load test to verify the validity of the method that can measure multi-point displacement responses of structures using image processing technique.

• Journal of Ethics
• /
• no.77
• /
• pp.73-112
• /
• 2010

This study aims to explore the character and problem of multicultural society in Korea in terms of the concept of moral panics. Its major issues are dealt with as follows: Firstly, this essay will apply two concepts of culture in multiculturalism - the pattern of meaning and a study of perfection- to three degrees of multicultural members: by individual, by groups and by a society as a whole. In this approach, moral panics of multicultural society in Korea have been manipulated by the secondary definitions like Korean government and media. In this study, however, the resource of the panics would be seen as nationalism in Korean history. To remove it in this essay, the conception of the pattern of meaning, which makes members understand others outer their norms, should be harmonized with that of a study of perfection by which they have identities. Secondly, the main subject of multiculturalism in Korea should at least be majority (groups)-Korean, not minority (groups)-foreigners. A stereotype of foreigners by majority is an image distorted by nationalities and races. People, for example, with the white skin from advanced countries are recognized as superior, while those born in the countries of Southeast Asia are, consciously or unconsciously, discriminated and have low positions due to socio-economic stratification in Korea. In this sense, a study of multicultural society in Korea should go forward to the inner direction to majority, because it is one of the real moral panics in Korea. In conclusion, it is important that there must be a study of identity which we can have of others in multicultural studies of Korea. It enables us to meet the conception of diversity. In that Korean government and media have neglected the danger of nationalism, it is also necessary that this study have any foundation of morality in ethics, which can give useful alternatives to the given polices of the secondary definitions.