• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.1
• /
• pp.81-88
• /
• 2006

In this paper, we analyze a noncommutativity error that is not able to be compensated with integrating gyro outputs in RLG-based INS. The system can suffer from some motion known as RLG dithering motion, coning motion, ISA motion derived by an AV mount and vehicle real dynamic motion. So these motions are a cause of the noncommutativity error, the system error derived by each motion has to be analyzed. For the analysis, a relation between rotation vector and gyro outputs is introduced and applied to define the coordinate transformation matrix and the angular vector.

• Journal of Space Technology and Applications
• /
• v.3 no.1
• /
• pp.58-71
• /
• 2023

This paper describes a navigation system design for horizontal position estimation using inertial measurement sensors and celestial navigation. In space, stars are widely spread objects in the celestial sphere and have been used mainly to obtain attitude information through star observation. However, it is also possible to obtain information about the horizontal position with the altitude of the star. It is called celestial navigation which is the same principle that former navigators used to locate themselves while sailing on the sea. In particular, in deep space where GPS is not available, it is important to obtain information on the location by making use of stars that are relatively easy to observe. Therefore, we introduce a navigation system that can estimate horizontal position and design two types of systems, loosely coupled and tightly coupled depending on how the measurements are utilized. It is intended to help in the future design of navigation system using celestial navigation by simulation studies that not only verify whether the system correctly estimates horizontal position but also comparing the performance of loosely and tightly coupled methods.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1763_1764
• /
• 2009

관성항법시스템에서는 항법을 수행하기 전 항체의 자세를 구하는 정렬을 수행하여야 한다. 본 논문에서는 추정치 기반의 섭동모델인 Psi각 오차모델을 이용하여 정밀 정렬을 수행하는 알고리즘을 제시하고 모의실험을 통하여 정렬 오차가 예상 결과 범위 내로 추정됨을 확인하였다.

• ICROS
• /
• v.3 no.2
• /
• pp.51-57
• /
• 1997

이 글에서는 다음의 내용을 다루었다. 1. 기본원리 및 구성 2. 자이로 3. 복합 항법장치 4. 발전추세 및 전망

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.5
• /
• pp.83-92
• /
• 2007

In this paper, we present a design and implementation of three dimensional pointing device using Inertial Navigation System(INS) that acquires coordinates and location information without environmental dependancy. The INS measures coordinates based on the data from gyroscope and accelerometer and corrects the measured data from accelerometer using Kalman-Filter. In order to implement the idea of three dimensional pointing device, we choose a three dimensional Space-recognition mouse and use RFIC wireless communication to send a measured data to receiver for printing out the coordinate on display equipment. Based on INS and Kalman-Filter theoretical knowledge, we design and implement a three dimensional pointing device and verified the usability as an input device that can capture a human's move. also, we describe the applicability of this device in ubiquitous computing environment.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.1
• /
• pp.41-48
• /
• 2019

This paper deals with a method of aligning an aircraft fuselage and an inertial navigation sensor using three-dimensional coordinates obtained by an optical method. In order to verify the feasibility, we introduce the method to accurately align the coordinate system of the inertial navigation sensor and the aircraft reference coordinate system. It is verified through simulation that reflects the error level of the measuring device. In addition, optimization method based alignment algorithm is proposed for connection between optical sensor and inertial navigation sensor.

• Journal of Advanced Navigation Technology
• /
• v.23 no.3
• /
• pp.245-250
• /
• 2019

Inertial navigation system has navigation errors because of the error of inertial measurement unit (IMU) and misalignment over time. In order to solve this problem, aided navigation system is performed using global navigation satellite system (GNSS), speedometer, etc. The inertial navigation system equipped with underwater vehicle mainly uses speedometer and performed aided navigation because satellite signals do not pass through underwater. There are DVL, EM-Log, and RPM in the speedometer, and the sensors are applied according to the system environment. This paper describes velocity aided navigation using RPM of inertial navigation system operating in high speed and deep water environment. In addition, we proposes an algorithm to compensate the limit of RPM with straight direction and the current velocity error. There are results of monte-calo simulation to prove performance of the proposed algorithm.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.8
• /
• pp.788-795
• /
• 2011

In this paper, we present the requirements specification to develop the small ring laser gyroscope(RLG) which is applicable to the medium-grade inertial navigation system(INS) widely used as a main navigation system. To this end, first we analyse the performance specifications of RLG which is needed to configure the medium-grade INS and then we present the design results of RLG to meet the performance specifications, based on the overseas technology survey and the theoretical analysis. It is also shown in this paper what technology is required to develop a small RLG.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.144-147
• /
• 2010

본 연구에서는 실내의 활동추적 시스템을 위해 가속도센서와 지자계 센서를 이용하여 외부로부터 독립적인 소형의 관성항법장치를 제안하였다. 기존의 실내 위치추적은 주로 GNSS(global navigation satellite system)의 정보를 가져와 실내 환경에 맞게 초음파와 RSSI(received signal strength indicator)등을 이용하여 구성한 경우가 연구되었으나 이러한 위성항법은 좌표 값이 미리 저장된 고정 노드가 필수적이라는 단점이 있다. 따라서 본 연구에서는 실내 환경과 같이 이동거리가 길지 않으며, 기존 환경 및 외부로부터의 영향에서 자유로운 관성항법을 이용한 실내 활동추적시스템을 제안하였다. 이를 위해 지자계 센서와 3축 가속도 센서를 사용한 신호 계측부와 Zigbee기반의 무선 센서 네트워크를 이용한 무선 전송부를 구성하였으며, 계측된 데이터의 분석으로부터 실내 위치추적의 가능성을 평가하였다.

• ICROS
• /
• v.16 no.1
• /
• pp.51-55
• /
• 2010

제어 및 로봇 응용에서 이동체의 위치, 속도, 그리고 자세 정보를 획득하는 기능은 매우 중요한 여할을 수행한다. 위치, 속도, 그리고 자세 정보는 통틀어 항법정리라 통칭되며 전파센서, 영상센서, 혹은 관성센서 등 다양한 센서들의 조합에 의하여 획득될 수 있다. 항법정보의 획득에 있어서 특히 관성센서는 다양한 센서들의 조합에 있어서 가장 중요한 역할을 수행하는데 이는 관성센서가 다른 센서들과는 달리 주변의 조명 환경, 전파환경, 그리고 고의적인 외란에 강인한 특성을 지니며, 이동체의 빠른 운동을 세밀하게 수치화하여 표현할 수 있기 때문이다. 본 고에서는 이와 같은 장점을 지닌 관성센서의 출력을 정확하게 다루기 위해 명확한 이해가 요구되는 코리올리 효과에 대하여 살펴보고자 한다. 코리홀리 효과는 이동체의 운동을 회전하는 좌표계에서 관측할 경우 발생하는 특이한 현상에 해당되며 관성센서를 다루기 위한 준비 과정에서 많은 입문자들이 어려움을 가지는 부분으로 이해된다.