• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.11
• /
• pp.2694-2703
• /
• 1993

In the vibration analysis of Timoshenko beams by the finite element method, it is necessary to use a large number of elements or higher-order elements in modeling thin beams. This is because the overestimated stiffness matrix due to the shear locking phenomenon when lower-order displacement-based elements are used yields poor eigensolutions. As a result, the total number of degrees of freedom becomes critical in view of computational efficiency. In this paper, the curvature-based formulation is applied to the vibration problem. It is shown that the curvaturebased beam elements are free of shear locking and very efficient in the vibration analysis.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.2 no.2
• /
• pp.92-98
• /
• 1999

Dynamic behavior of missile which is fired in canister is analyzed by flexible multibody dynamics. The bending elasticity of missile is very important in case that missile is fired in the inclined launcher. In this paper, the force element model for the missile launching stage and the finite element model of missile are developed. The FEA model of missile is condensed into five lumped mass element model and the consistence between FE model and lumped mass model of missile is verified by modal analysis. As a result of analysis, sabot reaction force and pitch rate of missile for the variation of gap size and force element are obtained.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.10a
• /
• pp.757-759
• /
• 2004

C＃ 언어로 작성된 프로그램을 정적으로 분할할 때 기존의 객체 지향 프로그램에 이용하던 방법을 일반적으로 적용할 수 있다. 그러나 기존의 두 경로 그래프 도달 가능성 분할 알고리즘을 적용하였을 때 프로시져들 간의 전지적인 종속 관계를 표현하는 요약 간선만을 이용하면 두 번째 경로에서 역추적 할 때 모호성이 발생한다. 이러한 모호성 C＃의 이벤트, 델리게이트(delegate)들과 메소드의 다형적 호출 관계에서 발생될 수 있다. 본 논문은 호출된 프로시져의 호출하는 문맥을 설명하기 위하여 호출 지점에서 요약간선 및 경로 간선을 이용하여 C＃에서 다형적 호출에 대한 시스템 종속성 그래프(system dependence graph)에 대한 새로운 표현을 제안한다. 이 방법은 다형적 호출에서 발생하는 모호성을 해결할 수 있다.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.11
• /
• pp.1571-1577
• /
• 2015

A new mixed mode control of constant power and constant current for resistance spot welding inverter is proposed to improve the weld quality. The conventional control scheme adopts constant current or constant power control mode, however, it is not easy to guarantee the high weld quality because of the nonlinear resistance characteristics of the welding point. The proposed method utilizes the nonlinear characteristics by measuring the dynamic resistance in real time. Therefore, it is possible for the welder to be controlled adaptively depending on the welding state. Experimental results show that the proposed control scheme improves the weld quality by 6.8 times compared with the conventional constant current mode control.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.167-168
• /
• 2007

Design Rule이 작아짐에 따라 Transistor performance 향상을 위한 여러 방안중 SEG 공정이 적용되고 있으며 이에 따른 Transistor 특성 연구 결과이다. SEG공정 적용시 SEG Profile에 따라 Transistor의 Short Channel Effect 열화가 발생하였고 그 원인은 Sidewall Facet발생으로 추정되며 이를 개선시 Tr 특성이 개선됨을 확인하였다.

• Journal of the Korean Vacuum Society
• /
• v.8 no.3A
• /
• pp.218-223
• /
• 1999

We investigated the interfacial reactions between the $Y_2O_3$ film deposited by ICB processing and p-type (100) Si substrates upon annealing treatments in $O_2$ and Ar gas ambients. we also investigated the evolution of surface morphology of ICB deposited $Y_2O_3$ films upon annealing treatments. We observed that the root-mean-square(RMS) value of surface roughness measured by AFM increased with annealing time at $800^{\circ}C$ in $O_2$ ambient, while the change of surface roughness was not observed in Ar ambient. We also found the growth of $SiO_2$ layer and the formation of yttium silicate layer. From the capacitance values $(C_{acc})$ measured by C-V measurements, the relative didldctric constant of $Y_2O_3$ film in metal-insulator-semiconductor(MIS) structure was estimated to be about 9.

• Bulletin of the Korean Chemical Society
• /
• v.16 no.10
• /
• pp.972-976
• /
• 1995

A trace amount of 4-biphenylcarboxylate having a pre-twisted biphenyl moiety was attached to a poly(methyl methacrylate) side chain and the fluorescence properties of the chromophore were investigated in various solvents such as ethyl acetate and butyl chloride. At room temperature, the polymer exhibited a distinct red shift of the short wavelength emission (325 nm) and an enhanced emission intensity around 430 nm upon excitation at the absorption red edge. The temperature dependence of the intensity ratio (R) of the 325 nm emission to the 430 nm emission was observed when exciting at the red edge over the temperature range between -20 and 60 ℃. However, the temperature dependence was not observed when exciting at the shorter wavelength. The Arrhenius plot of the R value shows the activation energy of 6.0 kJ/mol which is in good agreement with the energy required for the twist of the biphenyl moiety. Together with the results of red edge excitation effects it was concluded that the pre-twisted geometry of the biphenyl moiety is preserved by the restriction of the polymer chain to facilitate the formation of the twisted intramolecular charge transfer (TICT) state upon excitation.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.279-282
• /
• 2011

The analysis and experimental results for the bellows of gasgenerator liquid oxygen shut-off valve are presented. The analyses are performed using EJMA (Expansion Joint Manufacturing Association) standard and the commercial FE (finite element) analysis program, Abaqus v6.9, at room and cryogenic temperatures. The results include the spring rate, the stress and the fatigue life of the bellows. The effects of the contact and material plasticity on the FE analysis results are also analyzed.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2004.05a
• /
• pp.925-928
• /
• 2004

C# 언어로 작성된 프로그램에서 기존의 객체 지향 프로그램에서 이용하던 정적 분할 방법을 적용한다. 기존의 두 경로 그래프 도달 가능성 분할 알고리즘을 적용하였을 때 프로시져들 간의 전이적인 종속 관계를 표현하는 요약 간선만을 이용하면 두 번째 경로에서 역 추적 할 때 모호성이 발생한다. 이러한 모호성은 C#의 이벤트, 델리게이트(delegate)들과 메소드의 다형적 호출 관계에서 발생될 수 있다. 본 논문은 호출된 프로시져의 호출하는 문맥을 설명하기 위하여 호출 지점에서 요약 간선 및 경로 간선을 이용하여 C#에서 다형적 호출에 대한 시스템 종속성 그래프(system dependence graph)에 대한 새로운 표현을 제안한다. 이 방법은 다형적 호출에서 발생하는 모호성을 해결할 수 있다.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.7 no.5
• /
• pp.129-137
• /
• 2007

It is very urgent to research the proper recycling method of marine dredged soil as construction material for environmental conservation. Couple of developed countries have been lots of related researches on recycling of marine dredged soil for marine environmental conservation. This is highly imperative in our country. A small-scaled model test for underground pipe has been conducted on the use of controlled low strength materials with marine dredged soil. The flexible pipe, which is called PVC, was used. Four different testing materials, such as natural sand, insitu-soil, sand-CLSM with marine dredged soil and insitu-soil CLSM with marine dredged soil, were used. The vertical and lateral displacement of pipe with CLSM is one tenth of common granular materials. Also, the use of CSLM showed lower lateral and vertical pressure than that of common granular materials. The main reason is the effect of cement hardening of CLSM. This could increase of the stiffness of pipe with backfill materials. In this study, the data presented show that marine dredged soil and in-situ soil can be successfully used in CLSM and reduce the deformation and earth pressure on flexible pipe.