• Science of Emotion and Sensibility
• /
• v.20 no.2
• /
• pp.117-126
• /
• 2017

In this study, moisture transport characteristics for the woven and knitted fabrics made of 8 kinds of fiber materials using MMT (moisture management tester) were measured and discussed with the Bireck bt MMT and water evaporating rate (WER) measuring methods, which are vertical moisture transport methods. In addition, the drying property by MMT of the eight kinds of specimens was compared and discussed with the results measured by the vertical drying measurement. MMT experimental result which is horizental moisture transport appeared to be similar to the result of the Bireck method, which is the vertical moisture transport experiment. Absortion time measured from drip method of the fabrics made of the bamboo, linen, and cotton/nylon composite fabrics was short and thus they showed best wicking property, which was attributed to the low contact angle on the fabric surface and high porosity of the fabrics due to the staple yarn structure composed of the hydrophilic staple fibers. In drying property of the fabric specimens by MMT, maximum absorption radius of the dry-zone knit and bamboo woven fabrics were the highest and they showed the best drying property, which was a little different result compared with vertical drying measurement method. Half time of the drying rate in the MMT method was highly correlated with the fabric thickness and saturated moisture absortion rate and their regression coefficients were 0.9 and 0.88, respectively. This means that the knitted and woven fabric design technology for retaining good wicking and drying properties of the fabrics with thin fabric thickness is very important for obtaining high functional wear comfort fabrics. In addition, wicking and drying properties of the fabrics made of different fiber materials and with different yarns and fabric structures showed different results according to the measuring methods.

• Korean journal of applied entomology
• /
• v.39 no.4
• /
• pp.251-258
• /
• 2000

These studies were conducted to investigate the prey consumption and suppression of cotton aphid and green peach aphid by Chrysopa pallens Ramber as a predator. The 3$^{rd}$ instar of C. pallets fed on 29.8, 77.9, 133.6, and 155.7 individuals of apterous Aphis goussypii Glover a day at 17,22, 27, and 32$^{\circ}C$, respectively. A preovipositing female fed on 73.1 individuals, ovipositing female on 86.6 individuals, and adult male on 69.7 individuals of apterous Myzus persicae (Sulzer) a day at the 27$^{\circ}C$. The functional response curve of the larvae and adults of C. pallens to the densities of A. gossypii indicated Helling’s Type II: the consumption of prey by the C. pallens increased with the prey density but the consumption rate decreased. The attack rate of 3rd instar of C. pallens was the highest among the 2nd instar, 3$^{rd}$ instar, adult male and adult female, and handling time was the shortest. The critical ratio of the predator vs. the prey to effectively suppress the population of A. gossypii by releasing C. pallets eggs was 1 : 4 on red pepper and egg plant, and 1 : 3 on cucumber. Release of second larval stave of C. pallens at the ratio of 1 : 30 of the predator vs. the prey controlled satisfactorily A. gossypii on red pepper, and 1 : 20 on cucumber and tomato. The three-times introduction of the eggs of C. pallens was as effective as four applications of insecticides from mid-June to late September.r.

• Journal of the Korean Geotechnical Society
• /
• v.29 no.5
• /
• pp.39-52
• /
• 2013

The shear stress characteristics of landslide materials can be affected by various factors. We examined the shear stress characteristics of two different soils using ring-shear apparatus, in which saturation-consolidation-shearing speed can be easily controlled. This paper presents (i) shear stress-time characteristics, (ii) shear stress depending on normal stress and shear speed and (iii) shear stress as a function of shearing speed. Materials used in this paper were the Nakdong River sand and muds taken from Jinhae coastal area in Korea. Samples were prepared in three types: Sand (upper)-Sand (lower), Clay (upper)-Clay (lower) and Sand (upper)-Clay (lower). The upper and lower indicate the samples placed in upper and lower ring shear boxes, respectively. For given normal stresses (50 and 100 kPa) and shearing speed (0.1 mm/sec), we performed ring shear tests. Then the failure lines were determined in the second test. Last, we determined the shear stress characteristics depending on different shearing speeds, such as 0.01, 0.1, 1, 10, 100 mm/sec. As a result, we found that shear stress characteristics are strongly dependent on above three factors. The shear stress of Sand (upper)-Clay (lower) is smaller than that of Sand (upper)-Sand (lower), but slightly larger than that of Clay (upper)-Clay (lower). The shear stress is also characterized by grain crushing and wetting process at slip surface.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.39-39
• /
• 2007

원자층 증착(Atomic Layer Deposition: ALD) 방법은 반응물질들을 펄스형태로 챔버에 공급하여 기판표면에 반응물질의 표면 포화반응에 의한 화학적 흡착과 탈착을 이용한 박막증착기술이다. ALD법은 기존의 화학적 기상증착(Chemical Vapor Deposition: CVD)과 달리 자기 제한적 반응(self-limiting reaction) 에 의하여 반응가스가 기판 표면에서만 반응하고 가스와 가스 간에는 반응하지 않는다. 따라서 박막의 조성 정밀제어가 쉽고, 파티클 발생이 없으며, 대면적의 박막 증착시 균일성이 우수하고, 박막 두께의 정밀 조절이 용이한 장점이 있다. 이러한 ALD 방식으로 3차원의 반도체 장치 구조물에 산화막 등을 형성하는 공정에서 중요한 요소 중의 하나는 전구체의 충분한 공급이다. 따라서 증기압이 높은 전구체를 선호하는 경향이 있다. 그러나 증기압이 낮은 전구체를 사용할 경우, 공급량이 부족하여 단차 도포성(step coverage)이 떨어지는 문제가 있다. 원자층 증착 공정에서 전구체를 충분히 공급하기 위해전구체 온도를 증가시키거나 전구체의 공급시간을 늘리는 방법을 사용한다. 그러나 전구체 온도를 상승시키는 경우, 전구체의 변질이나 수명을 단축시키는 문제점을 발생시킬 수 있으며. 전구체를 충분히 공급하기 위하여 전구체의 공급시간을 늘이는 방법을 사용하면, 원하는 박막을 형성하기 위하여 소요되는 공정시간과 전구체 사용량이 증가된다. 본 논문에서는 이러한 문제점을 해결하기 위해 반응기 안에서 전구체 노출 시간을 조절하는 새로운 ALD 공정을 소개한다. 특히 이러한 기술을 적용하면 나노튜브를 성장시키는데 매우 유리하다. 본 연구에서 전구체 노출 시간을 조절하기 위하여 사용된 ALD 장비는 Lucida-D200-PL (NCD Technology사)이며 (TEMA)Zr와 H2O를 사용하여 ZrO2 나노튜브를 폴리카보네이트 위에 성장시켰다. 전구체의 노출 시간은 반응기의 Stop 밸브를 이용하여 조절하였으며, SEM, TEM 등을 이용하여 나노튜브의 균일성과 단차피복성 등의 특성을 관찰하였다. 그 결과 전구체 노출시간을 조절함으로써 높은 종횡비를 갖는 나노튜브를 성장 시킬 수 있음을 확인하였다. 또한 낮은 증기압을 가지는 전구체를 이용하여도 우수한 특성의 나노튜브를 균일하게 성장시킬 수 있었다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.103-103
• /
• 2000

강한 결정 방향 의존성과 낮은 항정계를 갖는 Bi4Ti3O12 강유전체 박막은 NDRO형 비휘발성 강유전체 메모리 분야에서 매우 유망한 재료이다. 이를 위해서는 실리콘 기판과의 계면조절과 실리콘 기판성에서 고품질의 강유전성 박막을 성장시키는 기술이 필수적이다. MOCVD에 의한 Bi4Ti3O12 의 증착에서는 Bi 성분의 강한 휘발 특성과 낮은 반응성으로 인하여 조성과 두께 등의 조절이 매우 어렵다. 따라서 화학기상증착의 기구를 이해하고 제어하는 기술이 양질의 박막을 얻는데 필수적이다. 본 연구에서는 유기금속 원료 TPB, TIP 과 산소를 이용하여 실리콘 기판위에 Bi4Ti3O12 강유전체 박막을 증착할 때, 증착 변수의 변화에 따른 박막의 증착 거동과 구조적, 전기적 특성을 연계하여 분석하였다. 특히 기판부착력이 낮고 휘발성이 강한 Bi의 특성으로 인한 문제를 개선하기 위하여 TIP원료를 주기적으로 공급, 중단을 반복하는 펄스주입법을 고안하여 그 효과를 살펴보았다. 실리콘 기판위에서 TiO2의 증착속도는 실험온도 영역에서 온도에 따라 변화하지 않는 전형적인 물질 전달에 의해 지배되는 양상을 나타내었다. 반면 Bi2O3 경우에는 50$0^{\circ}C$ 이상에서 급격하게 증착속도가 감소하는 특이한 경향을 나타내었으며 이는 Bi2O3의 높은 휘발성 때문일 것이다. Bi4Ti3O12 박막은 온도증가에 따라 증착속도가 증가한 후 $600^{\circ}C$ 이상에서 포화되는 경향을 보였다. 이로부터 실리콘 기판위에서의 Bi4Ti3O12 박막의 증착 모델을 제시하였다. Bi2O3에 비해 상대적으로 표면 부착력이 월등히 큰 TiO2가 우선적으로 실리콘 펴면에 형성된 후 TPB 유기금속 원료가 이 TiO2와 반응하는 과정으로 Bi4Ti3O12 박막이 증착된다. $600^{\circ}C$이상에서는 증착 변수들을 바꾸어도 물성이 변하지 않는 자기조절기능이 있음을 알 수 있었는데 이는 고온에서의 Bi2O3의 강한 휘발성 때문일 것이다. 실리콘 기판에서 층상 페로브스카이트 상은 58$0^{\circ}C$ 이상에서 형성되며, 매우 좁은 온도 변화에도 결정구조, 박막현상 및 성분이 크게 바뀌는 온도에 민감한 증착거동이 관찰되었다. 증착 모델에서 예견되는 Bi의 불리함을 개선하기 위해 펄스주입법을 실시한 경우 Bi의 성분량이 증가되었고 결정성이 향상되었다. 이로부터 펄스주입법이 박막내에 부족하기 쉬운 Bi를 보충하여 박막의 특성을 개선함을 확인하였다. Bi4Ti3O12 박막의 증착온도에 따른 누설전류 특성 측정 결과 증착온도가 감소할수록 누설전류가 감소함을 알 수 있었고 펄스주입법이 연속주입법보다 더 낮은 누설전류를 보임을 알았다. 펄스주입법의 경우 -2.5V 인가 시의 누설전류는 7.4$\times$10-8A/cm2에서 1.3$\times$10+7A/cm2의 매우 우수한 값을 가졌다. 연속 주입법에 의해 증착된 박막은 C-V 측정 결과 강유전성 이력이 나타나지 않았으나, $600^{\circ}C$ 이상에서 펄스주입법에 의해 증착된 박박은 강유전성 이력을 나타내었다.

• Journal of the Korean Magnetics Society
• /
• v.18 no.4
• /
• pp.136-141
• /
• 2008

In this study, the magnetic(static and high-frequency) and microwave absorbing properties have been investigated in Ru-Co substituted M-hexaferrites($BaFe_{12-2x}Ru_xCo_xO_{19}$). The powders and sintered specimens were prepared by conventional ceramic processing technique. With the calcined powders, the composite specimens were prepared using the silicone rubber as a matrix material. The substitution ratio of Ru-Co to obtain in-plane magnetic anisotropy, thus having the minimum coercivity, is much smaller (about x=0.3) than the previously reported Ti-Co substituted specimen. Owing to this low substitution, the specimen has a large value of saturation magnetization($M_s$=65 emu/g). Ferromagnetic resonance behavior and microwave absorbing frequency band is strongly influnced by the coercvity which can be controlled by Ru-Co substitution ratio. It is found that the M-hexaferrites with planar magnetic anisotropy by doping Ru-Co in both sintered and composite form have superior microwave absorbing properties in GHz frequency range.

• Korean Journal of Environmental Agriculture
• /
• v.29 no.1
• /
• pp.27-32
• /
• 2010

This study was conducted to reclassify Anryong series based on the second edition of Soil Taxonomy and to discuss the formation of Anryong series distributed on the mountain foot slope. Morphological properties of typifying pedon of Anryong series were investigated and physico-chemical properties were analyzed according to Soil survey laboratory methods manual. The typifying pedon of Anryong series has brown (7.5YR 4/4) loam Ap horizon (0-22 cm), strong brown (7.5YR 4/6) cobbly clay loam BAt horizon (22-35 cm), strong brown (7.5YR 4/6) cobbly clay loam Bt1 horizon (35-55 cm), reddish brown (5YR 5/4) cobbly clay loam Bt2 horizon (55-82 cm), and brown (7.5YR 5/4) cobbly clay loam Bt3 horizon (82-120 cm). The typifying pedon has an argillic horizon from a depth of 22 to 120 cm and a base saturation (sum of cations) of less than 35% at 125 cm below the upper boundary of the argillic horizon. It can be classified as Ultisol, not as Alfisol. It has udic soil moisture regime, and can be classified as Udult. Also that meets the requirements of Typic Hapludults. It has 18-35% clay at the particle-size control section, and have mesic soil temperature regime. Therefore Anryong series can be classified as fine loamy, mesic family of Typic Hapludults, not as fine loamy, mesic family of Ultic Hapludalfs. Anryong series occur on mountain foot slope positions in colluvial materials derived from acid and intermediate crystalline rocks. They are developed as Ultisols with clay mineral weathering, translocation of clays to accumulate in an argillic horizon, and leaching of base-forming cations from the profile for relatively long periods under humid and temperate climates in Korea.

• Journal of Bio-Environment Control
• /
• v.18 no.3
• /
• pp.238-243
• /
• 2009

To investigate the characteristics of moisture content (MC), moisture distribution and starting point of drainage in a rockwool slab culture, time domain reflectometry (TDR) sensors were used in a drip irrigation system. MC values ($0{\sim}100%$) measured by TDR sensors in a slab were compared to those by loadcells. Seventy two seedlings of paprika (Capsicum annuum L.) were cultured for $5{\sim}6$ months in a green-house and the starting point of irrigation was determined by the average value of three TDR sensors which were inserted diagonally across the slabs under the plants. MCs as a standard for starting point of irrigation by TDR were determined with 40%, 50%, and 60%. Distribution of MCs in a slab measured with five TDR sensors equally spaced from two irrigation points were not much different when the MC in the slab increased from zero to saturation point. The saturated MCs in the slab were presented at $58{\sim}65%$ and the drain was started when the MC became around $50{\sim}55%$. At the saturated MC in the slab, TDR sensors presented 100% but the values from the loadcell showed 90% at the same time. However, measurement errors between two methods for MC remarkably decreased with a decrease in the MC in a slab. Especially when the MC was maintaining below 60%, the errors between TDR and loadcell methods for measuring MC in the rock-wool slab were less than 5%. There were no significant differences in number of fruits and fresh and dry weights of fruits when they were cultured under the different MC conditions with three irrigation regimes (40%, 50%, and 60%). These results indicated that the MC control by TDR sensors in a rock-wool based paprika culture can be suggested as a method to determine the starting point of irrigation for a soilless culture system.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.3 no.1 s.4
• /
• pp.85-96
• /
• 2004

The study begin with a basic concept, if the occupancy length of vehicle detector is directly proportional to the delay of vehicle. That is, it analogize vehicle's delay of a occupancy time. The results of a study was far superior in the estimation of a queue length. It is a very good points the operator is not necessary to optimize s1, s2, Thdoc. Thdoc(critical congestion degree) replaced 0.7 with 0.2 - 0.3. But, if vehicles have been experience in delay was not occupy vehicle detector, the study is in existence some problems. In conclusion, it is necessary that stretch queue detector or install paired queue detector. Also I want to be made steady progress a following study relation to this study, because it is required traffic signal control on congestion.

• Sleep Medicine and Psychophysiology
• /
• v.22 no.1
• /
• pp.11-19
• /
• 2015

Objectives: Whether daytime sleepiness is proportional to the severity of sleep apnea in obstructive sleep apnea syndrome (OSAS) is controversial. In this study we investigated how insomnia severity affects the association between daytime sleepiness and sleep apnea severity in OSAS. Methods: The present study included 235 male subjects who were diagnosed with OSAS based on clinical history and nocturnal polysomnography. Pearson's correlation analysis was conducted among sleep and mood-related self-reported data, polysomnographic data and demographic data of all subjects. Based on Pittsburgh Sleep Quality Index (PSQI), the subjects were divided into 2 groups; group A (n = 75; $PSQI{\leq}5$) and group B (n = 160; PSQI > 5). Partial correlation analysis was performed between the Epworth Sleepiness Scale (ESS) and other data in both groups. Multiple linear regression analysis was conducted to investigate the factors which affected the ESS in group A. Results: Pearson's correlation analysis showed weak or non-existent correlations between ESS and apnea severity data such as apnea-hypopnea index (AHI) (r = 0.148, p = 0.023), apnea index (AI) (r = 0.137, p = 0.036), hypopnea index (HI) (r = 0.058, p = 0.377), oxygen desaturation index (ODI) (r = 0.149, p = 0.022) and arousal total index (ATI) (r = 0.129, p = 0.048). Positive correlations between ESS and apnea severity data such as AHI ($r_p=0.313$, p = 0.008), AI ($r_p=0.339$, p = 0.004), ODI ($r_p=0.289$, p = 0.015) and ATI ($r_p=0.256$, p = 0.031) were observed only in group A. Multiple regression analysis showed that AI (t = 2.996, p = 0.004) and BAI (t = 2.721, p = 0.008) were associated with ESS in group A. Conclusion: The correlation between daytime sleepiness and sleep apnea severity was shown only in group A. This result suggests that associations between daytime sleepiness in OSAS and sleep apnea severity will become prominent when controlling for insomnia-related variables.