• Proceedings of the KIPE Conference
• /
• 2018.11a
• /
• pp.92-94
• /
• 2018

본 논문은 SiC MOSFET 디바이스를 사용하는 전력변환장치에서 Rogowski 코일을 이용하여 SiC MOSFET 디바이스에 흐르는 전류를 측정하여, 과전류를 검출하고 게이팅 신호를 차단하는 기법에 관하여 연구한다. SiC MOSFET는 소자의 특성으로 보편적으로 사용되는 과전류 검출 방법인 DeSAT 적용이 어렵기 때문에 Rogowski 코일을 사용하여 스위치 전류를 측정, 과전류를 검출한다. 본 논문에서는 PCB패턴 Rogowski 코일의 설계 방법뿐만 아니라 Rogowski 코일과 적분기의 대역폭에 대해서도 논의한다. 실험은 직류링크 커패시터에 SiC MOSFET 스위치 레그를 병렬로 연결하고, 직류링크 커패시터에 직류전압을 충전 후 스위치 레그를 약 6us정도 단락시켜 SiC MOSFET에 과전류를 발생시킨다. 이 때, 제안한 Rogowski 코일을 이용한 과전류 검출 및 차단 기법의 적용 전후를 비교하여 동작 및 성능(검출 및 차단 소요시간)을 확인한다. 마지막으로 실험 결과를 통해 본 논문에서 제안한 PCB패턴 Rogowski 코일을 이용하여 과전류 검출 및 차단 기법이 검증되었다.

• Restorative Dentistry and Endodontics
• /
• v.30 no.2
• /
• pp.79-85
• /
• 2005

The purpose of this study was to evaluate the obturation efficiency of a non-standardized gutta-percha cone in curved root canals prepared with 0.06 taper nickel-titanium instruments. Sixty simulated curved root canals in clear resin blocks were prepared with crown-down technique using 0.06 taper rotary $ProTaper^{TM}$and ProFile (Dentsply-Maillefer) until apical canal was size 30. Root canals were randomly divided into 4 groups of 15 blocks and obturated with cold-laterally compacted gutta-percha technique by using either a non-standardized size medium gutta-percha cone or an ISO-standardized size 30 one as a master cone. Gutta-percha area ratio were calculated at apical levels of 1, 3 and 5 mm using AutoCAD 2000 after cross-sectioning, and the data were analyzed with one-way and two-way ANOVAs and Duncan's multiple range test. Non-standardized size medium cone groups showed significantly higher gutta-percha area ratio than standardized cone groups at all apical levels (p < 0.01). Non-standardized cone groups used significantly less accessory cones than standardized cone groups (p < 0.01).

• The Korean Journal of Mycology
• /
• v.20 no.1
• /
• pp.72-76
• /
• 1992

The extraction and separation methods of protein-bound polysaccharides from the mycelium and culture broth of Coriolus versicolor (Fr) Quel were investigated. The use of 2% solution of surface active agent Triton X-100, was effective for extraction of the protein-bound polysaccharides from the mycelium. For the separation and partial purification of the protein-bound polysaccharides, the column chromatography using DEAE-Cellulose and DEAE-Sephadex proved to be effective.

• Journal of Satellite, Information and Communications
• /
• v.8 no.3
• /
• pp.15-19
• /
• 2013

Lithium-ion batteries have been used for high density energy storage system due to the features such as low self-discharge rate. And the unit cell battery with the voltage less than 4V is recommended to use the series connections for a high voltage charger. When batteries are charged or discharged with series connection, there may be an explosion or degradation of unit cell battery owing to undistributed internal resistance of cell battery. therefore, the voltages of unit cell batteries should be monitored to prevent an overcharging and a deep discharging. This paper introduces the implementation of CVM (Cell Voltage Monitoring) system that can transmit the 12 channel's information including voltages and temperatures with the 12-bits resolutions and the transmission speed of 192 kbps.

• Tunnel and Underground Space
• /
• v.14 no.5
• /
• pp.318-326
• /
• 2004

In this study, a new direct shear apparatus was developed to investigate the shear characteristics of the rock joints at various conditions. Using the developed apparatus, various experiments on filled rock joints were carried out considering the asperity angle, the normal stress, the type and thickness of filling material and to investigated the basic shear characteristics of filled rock joints were analyzed. According to the experiments performed under the constant normal stress condition by varying the asperity angle, the type and thickness of filling material, it was shown that the behavior and strength of filled rock joint could be defined by the type and thickness of the filling material. The dilation angle of the filled joints was found to be smaller than that of unfilled rock joint, and thereby, the effect of roughness was also reduced due to the filling material. And critical thickness ratio varied according to stress level and roughness as well as the type of filing materials.

• Polymer(Korea)
• /
• v.38 no.4
• /
• pp.417-424
• /
• 2014

Reactivity and rheological behavior of highly concentrated polymer bonded explosives (PBX) simulant was studied. As a binder, thermosetting hydroxyl terminated polybutadiene (HTPB) was used. By using bimodal $CaCO_3$ (size ratio 10:1) and sugar particles (size ratio 25:1) as fillers, maximum 75 v% filling was possible during melt mixing. The relative viscosities of bimodal suspension were much lower than those of unimodal one and showed minimum values at 0.25 of fine particle fraction. In curing experiment, as curing temperature increased, the time of initiation and completeness of curing reaction became shortened, the torque kept low, and the change of internal temperature decreased.

• Korean Journal of Food Science and Technology
• /
• v.24 no.1
• /
• pp.82-85
• /
• 1992

Sterols in mayonnaise were determined by the gas liquid chromatographic(GLC) analysis using two different columns, packed column(silicone SE30) and fused silica capillary column(CBPl). Four kinds of sterol(cholesterol, campesterol, stigmasterol and ${\beta}-sitosterol$) were detected in mayonnaise. The method using capillary column proved to be superior in rapidity, reproducerbility and separability for the determination of sterols. The ranges of concentration of egg york in mayonnaise predicted from cholesterol content using packed and capillary columns were $2.69{\sim}7.11%\;and\;2.42{\sim}6.08%$, respectively. Analyzing the composition of campesterol, stigmasterol and (${\beta}-sitosterol$ in mayonnaise, it could be known that soybean oil and cottonseed oil are commonly used for the manufacture of mayonnaise.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.8
• /
• pp.823-829
• /
• 2014

In the present study, simple models were proposed to predict the capillary-driven flow length in a surfactant-added poly(dimethylsiloxane) (PDMS) rectangular microchannel. Owing to the hydrophobic nature of PDMS, it is difficult to transport water in a conventional PDMS microchannel by means of the capillary force alone. To overcome this problem, microchannels with a hydrophilic surface were fabricated using surfactant-added PDMS. By measuring the contact angle change on the surfactant-added PDMS surface, the behavior was investigated to establish a simple model. In order to predict the filling length induced by the capillary force, the Washburn equation was modified in the present study. From the investigation, it was found that the initial rate-of-change of the contact angle affected the filling length. Simple models were developed for three representative cases, and these can be useful tools in designing microfluidic manufacturing techniques including MIcroMolding In Capillaries (MIMIC).

• Tunnel and Underground Space
• /
• v.19 no.2
• /
• pp.107-122
• /
• 2009

Insufficient reinforcement for maximizing payability and benefits in mining cavities causes subsidence problems and it threatens residents' lives and properties. So many reinforcement management methods are developed and now various methods are being applied in the field. Among them, a filling method which sends reinforcement materials in the cavities is used extensively. However, domestic geological condition and coal mining methods are so complicate that make many steep cavities. Because of those problems, it is difficult to apply foreign methods directly, which is valid for horizontal cavities. In this study, the injection volume of quick setting grouting material which is developed for filling cavities in domestic condition and the shape of consolidated bodies are investigated. And a programming method for estimating proper injection amounts of filling materials is proposed. The results are verified by numerical analysis using UDEC.

• Tunnel and Underground Space
• /
• v.27 no.6
• /
• pp.357-365
• /
• 2017

The mine subsidence prevention technology has been promoted based on the field test for design, construction, automation measurement and monitoring optimized for investigation, design and mine-filling efficiency customized in Korean mining environment. Based on the R&D roadmap ('07~'16) of the 1st and 2nd stage, mine reclamation technology development has been focused on developing method of evaluating subsidence stability, development of filling material and optimum filling technology, and development of measuring instrument. In the future, in order to systematic management for the subsidence risk areas, we intend to enhance technological capabilities and strengthen the technological infrastructure for business promotion in parallel with the discovery and introduction of new technology to prevent subsidence in the 4th Industrial Revolution era.