• Applied Chemistry for Engineering
• /
• v.30 no.3
• /
• pp.384-388
• /
• 2019

In winter season, the snow and ice accretion on the bottom of the high speed railway rolling stock and boogie part has fallen at a high speed from the ballast section (gravel section for the transmission of the rolling stock load received by sleepers and fixing sleepers), causing the gravel to be scattered, thereby damaging the railway rolling stock structures and facilities. In order to solve these problems, the gravel scattering prevention net, manual de-icing, and movable hot air machine were used, but their efficiency was low. For the more efficient de-icing than ever before, an optimum material for de-icing fluid for high speed railway rolling stock was developed by evaluating the ice melting capacity, kinematic viscosity, evaporation of the material used as a chemical de-icing fluid. Four kinds of organic acid salts (sodium formate, sodium acetate, potassium formate and potassium acetate) and two different alcohols (propylene glycol, glycerol) were used as evaluation materials. Potassium formate, potassium acetate, and propylene glycol had similar ice melting capacities in the indoor test, but the propylene glycol showed the best ice melting capacity in spraying the system simulation test. This is because the kinematic viscosity of propylene glycol was 2.989029 St, which is higher than those of other materials therefore, it could stay longer on the ice and de-icing. In addition, potassium formate and potassium acetate were difficult to be used since the crystals precipitated and adversely affected the appearance of the rolling stock. The propylene glycol is the most optimum as an de-icing fluid for the high speed railway rolling stock.

• The Microorganisms and Industry
• /
• v.26 no.1
• /
• pp.2-7
• /
• 2000

Bacterium strain, K-173-10, which was isolated from waste soil of Korean brewing factories, could grow on acetate as the sole carbone source and accumulate a considerable amount of L-glutamic acid (24g/l) in the liguid culture medium. This strain was named by Brevibacterium ammoniagenes sp. by the standard method of taxonomy procedures given in the Manual of Microbiogical Methods.

• Food Science and Preservation
• /
• v.31 no.1
• /
• pp.149-160
• /
• 2024

Dextran is a glucose homo-polysaccharide with a predominantly α-1,6 glycosidic linkage of microbial source and is known to be produced primarily by lactic acid bacteria. However, it can also be obtained through the dextran dextrinase of acetic acid bacteria (Gluconobacter oxydans). The dextrin-based dextran was obtained from rice starch using G. oxydans fermentation of rice hydrolysate, and its properties were studied. Both dextrin- and rice hydrolysate-added media maintained the OD value of 6 after 20 h of incubation with acetic acid bacteria, and the gel permeation chromatography (GPC) analysis of the supernatant after 72 h of incubation confirmed that a polymeric material with DP of 480 and 405, which was different from the composition of the substrate in the medium, was produced. The glucose linkage pattern of the polysaccharide was confirmed using the proton nuclear magnetic resonance (¹H-NMR) and the increased α-1,4:α-1,6 bond ratio from 0.23 and 0.13 to 1:2.37 and 1:4.4, respectively, indicating that the main bonds were converted to α-1,6 bonds. The treatment of dextrin with a rat-derived alpha-glucosidase digestive enzyme resulted in a slow release of glucose, suggesting that rice hydrolysate can be converted to dextran using acetic acid bacteria with glycosyltransferase activity to produce high-value bio-materials with slowly digestible properties.

• Korean Journal of Poultry Science
• /
• v.40 no.1
• /
• pp.17-23
• /
• 2013

This work was carried out to investigate the performance of early laying period of large-type Korean native ducks. One hundred sixty eight ducks were used in this work and divided into A and B strains (6 replications/strain, 14 birds/replication). The days at first egg of A and B strains were the age of 154.5 and 154.7 days, egg weights were 69.1 g and 65.5 g, and body weights were 3,187 g and 3,105 g at the period of laying the first egg, respectively. The days at sexual maturity of A and B strains were the age of 175.8 and 171.5 days, egg weights were 75.2 g and 74.9 g, and body weights were 3,245 g and 3,225 g at the period of laying the first egg, respectively. There were no significant differences on the day of first egg, the day of sexual maturity, egg weight and body weight at first egg and the sexual maturity, average body weight, and daily feed intake between A and B strains (P>0.05). The day of the sexual maturity of B strain was earlier than that of A strain (P<0.05). However, weekly body weight was the highest at the age of 28 weeks (P<0.05), and weekly feed intake increased after 26 weeks old (P<0.05). Egg production (%) of B strain was higher than that of A strain at the age of 22~24 weeks (P<0.05), but there was no significant difference on egg production (%) the other weeks. A number of egg laid of B strain was higher than A strain at 22~24 weeks old (P<0.05). Feed conversion ratio of A and B strains were 10.7 and 6.53 at 24~24 weeks old, respectively, so feed conversion ratio of A strain was higher than that of B strain (P<0.05). Weekly feed conversion ratio wes the highest at 20~22 weeks old, and significantly decreased until 24~24 weeks old, but were lowly maintained from the age of 24 weeks to the age of 30 weeks. These results provided the basic data on the record of early laying period of large-type Korean native ducks.

• Journal of Conservation Science
• /
• v.35 no.6
• /
• pp.681-688
• /
• 2019

In this study, the characteristics of natural and synthetic adhesives used in woodcraft were evaluated. The pattern of deterioration of wood and adhesives according to changes in temperature and humidity were compared. For materials, one type of anlmal glue, three kinds of polyvinyl acetate adhesives, one type of epoxy adhesive and one type of zelkova wood were selected. Characteristics of physical and chemical characteristics, weather resistance and drying speed assessment were carried out. The adhesion characteristic evaluation showed that the adhesion strength of anlmal glue and one type of polyvinyl acetate adhesive were 6.54 N/㎟ and 7.01 N/㎟, pH meter of anlmal glue and polyvinyl acetate adhesives was pH 7.03 and pH 3.32-3.59 which were range of available as an adhesive. According to the test results of weather resistance, epoxy adhesives had the highest decreasing value in adhesion strength after deterioration. In the reversible test of the adhesive, it was found to be highly reversible in NaOH, a soluble solvent excluding epoxy, but attention is required when using the wood since it may show discoloration during processing.

• Food Science of Animal Resources
• /
• v.30 no.3
• /
• pp.458-465
• /
• 2010

This study evaluated the effect of whey brew cultured by Lactobacillus helveticus ATCC 55163 and Propionibacterium acidipropionici 5020 on bread quality characteristics. Ten and 15% whey brew were added to flour-based bread, after which bread volume, pH, total titratable acidity (TTA), moisture content, water activity, texture, organic acid content, and sensory evaluation were analyzed. The bread volume and TTA of control were the largest among the samples, whereas pH was the lowest. Moisture content did not significantly differ depending on the amount of whey brew added, though water activity was highest in the bread with 10% whey brew. However, hardness was the lowest in bread with 10% whey brew. Propionic acid was not detected while succinic acid, lactic acid, and acetic acid were detected in small amounts in the control compared to the test samples. Succinic acid, acetic acid, and lactic acid content was high in bread with 15% whey brew, with propionic acid present at a very high amount. In terms of sensory evaluation, bread with 10% whey brew had the highest score. As a result, high quality characteristics were associated with the bread with 10% whey brew, whereas long preservation was a characteristic of the bread with 15% whey brew.

• Korean Journal of Food Science and Technology
• /
• v.51 no.2
• /
• pp.97-102
• /
• 2019

Wheat germ, which is rich in nutrients and phytochemicals, is a by-product during the milling process of wheat kernel. In this study, we aimed to increase the amount of bioactive 2,6-dimethoxy-1,4-benzoquinone (2,6-DMBQ) in wheat germ using the cell-wall-degrading enzyme cellulase (Celluclast 1.5L). The amounts of organic acids, free sugars, and 2,6-DMBQ in wheat germ treated with Celluclast 1.5L were evaluated at various reaction times and temperatures. The results of reversed-phase high-performance liquid chromatography of Celluclast 1.5L-treated wheat germ revealed 2,6-DMBQ, four organic acids (tartaric, acetic, lactic, and succinic acids), and three free sugars (sucrose, fructose, and glucose). As reaction time and temperature of the mixture of wheat germ and Celluclast 1.5L increased, the contents of four organic acids, glucose, fructose, and 2,6-DMBQ increased, but that of sucrose decreased. Taken together, these results suggest that Celluclast 1.5L-treated wheat germ containing increased amounts of 2,6-DMBQ serves as a source of functional ingredients in food industry.

• Food Science of Animal Resources
• /
• v.20 no.3
• /
• pp.181-191
• /
• 2000

젖산균의 생장을 위한 질소, 탄소 공급원으로서 corn steep liquor의 이용 가능성을 시험하고 반응 표면 분석(Response surface metho-dology)을 이용하여 젖산균의 최적 생상 배지 조성을 연구하였다. 반응 표면 분석에서 L.fermentum의 생장배지에 첨가되 corn steep liquor와 yeast extract의 농도(p<0.01) 그리고 corn steep liquor와 yeast extract의 교호작용(P<0.05)이 L.ferm-entum의 생장에 큰 영향을 미치는 것으로 나타났으며, 이때 생균수가 최대인 corn steep liquor의 함량은 10.77%, yeast extract는 3.39%.Tween 80은 1.69%으로 예측되었다. 한편, Lc, lactis ssp. lactis 의 생장배지는 corn steep liquor 의 농도(P<0.01) 그리고 corn steep li-quor와 $\beta$-glycerophosphate disodium salt의 교호작용(P<0.05)인 Lc. lactis ssp. lactis의 생장에 큰 영향을 미치는 것으로 나타났으며 이때 생균수가 최대인 corn steep liquor의 함량은 3.5%, $\beta$-glycerophosphate disodium salt는 4.38%로 예측되었다. MRS broth와 예측된 최적 배지에서 L.fermentum의 젖산과 초산의 생성량은 각각 0.166, 0.114과 0.273, 0.081 M이고 M 17glc broth와 최적배지에서 Lc. lacti ssp. lactis의 젖산과 초산의 생성량은 각각 0.089, 0.003과 0.189, 0.003M이었다. 따라서 corn steep liquor는 L. fermentum와 Lc. lactis ssp, lactis 의 생장을 위해 질소 또는 탄소 공급원으로서 배지에 첨가 될 수 있는 우수한 농업 부산물로 판단되었다.

• Korean Journal of Food Science and Technology
• /
• v.8 no.4
• /
• pp.207-211
• /
• 1976

Treated with various methods, body muscle of squid was cross section, stained by Van Gieson staining method, and observed microscopically to study on the state of thin layer of skin separated from meat. Results obtained were summarized as follows : 1. By general hot spring treatment were 1st. 2nd. and 3rd. layers of skin removed from squid muscle but 4th. not. 2. By boiling treatment was tissue of muscle fibre fissured largely toward the muscle fibre. 3. Sodium acetate treatment was superior to sodium nitrate, sodium sulfate and sodium tartrate treatment in the effect that the skin was separated from meat. Especially, concentrate solution of sodium acetate had the most excellent effect in the chemical reagent treatment. 4. By proteolytic enzyme treatment were 1st. 2nd. 3rd. and 4th. layers of skin removed all from squid muscle and the boundary fibre between skin and meat swelled in particular. 5. Two kinds of skin removing method, proteolytic enzyme treatment and sodium acetate treatment, were desirable to the actual processing.

• Journal of Korean Society of Forest Science
• /
• v.35 no.1
• /
• pp.19-23
• /
• 1977

Tropical hard wood produces a number of extracts, especially hot-water extracts. The lignin content in the two kinds of bangkirai and red lauan belonging to genus Shorea, was as high as in temperate zone soft wood, mangrove wood of genus Rhizophara contained it on the same level as temperate zone hard wood and keruing of genus Dipterocarpus was in between the two kinds of bangkirau and red lauan, and keruing wood. The xylose content of saccharose composition in the tree of genus Shorea, was as low as in needle-leaved trees, mangrove wood contained it on the same level as broad-leaved trees and the xylose content in keruing wood was in between the above two kinds of wood. The total retrieving rate of alditol acetate acetificated with sulphuric acid and acetic anhydride, did not reach 100%, even if it was supplemented. There was no difficulty in analyzing alditol immediately after acetification but, when it was left for four or five days, the acetificated alditol acetate was dissolved. The pyridine alditol acetificated with pyridine and acetic anhydride, showed the same result.