• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.6
• /
• pp.153-172
• /
• 2018

Overloading of Commercial vehicles have been an important area of transportation as one of the main causes of pavement damage, bridge collapse, severe traffic accident, etc. In this study, we analyzed the effects of overweight prevention by analyzing overweight driving patterns and using weight sensors. First, we analyzed relevant literatures of overweight and surveyed the commercial weight sensors. Then we chose the typical type of overweight vehicles based of overweight enforcement data analysis. MEMs inclinometer weight sensor were installed to 10 test vehicles and data was collected by weight sensors and gps in real time. As a result of gross vehicle weight and axle weight analysis, it was found weight sensor could decrease overweight rate. However, since the number of samples of test vehicles is insufficient to represent the whole commercial vehicle, further studies are deemed possible through the extension test.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.429-432
• /
• 2011

과적차량은 도로 및 교량 구조물과 도로 횡단 시설물 등에 손상요인으로 작용하며 기존의 단속 시스템은 축조작 및 인력부족등 많은 문제점을 내포하고 있어서 이에 대한 대처방안이 요구되고 있다. 이에 본 논문에서는 주행중인 과적차량의 지능형 임베디드 단속 시스템 개발을 위하여 유전자 알고리즘 기법을 적용, 도로자체를 저울로 하여 주행중인 차량의 하중 및 주행정보를 분석을 연구하였으며 이를 통하여 효율적인 과적 단속이 이루어 질 수 있다고 판단된다. 또한 USN구성을 위한 임베디드 센서와 함께 Internal/External Network의 무선화 시스템을 통한 사용자 중심의 시스템을 구축하는 것이 최종 목적이므로 향후 WCDMA/HSDPA를 이용한 External Network의 구성과 실제 과적 단속 적용을 위하여 Test Bed를 통한 실험이 실시되어야 할 것이다.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.4
• /
• pp.39-49
• /
• 2022

In this study, data on traffic volume and weight of small trucks were collected from three National Highways to identify the overload status of small trucks excluded from domestic overloaded vehicle enforcement. These data were classified according to the vehicle type, day of the week, and time of day to analyze the overload distributions by the vehicle total weight. From the analysis results by vehicle type, on average, the overload ratios for trucks of 1.5 tons or less, 2.5 tons or less, 3.5 tons or less were 6.2%, 31.7%, and 13.7%, respectively. In addition, for the same vehicle model, there was a difference by collection point, and the smaller the total weight of the small truck, the higher the overload ratio. From the results according to the day of the week, there was no tendency for the overload ratio to appear high on a specific day, but there was a predictable occurrence pattern at each site. In addition, from the results by the time of day, the overload ratio was the highest on average after lunch (13:00-15:59) at all sites.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2007.11a
• /
• pp.717-718
• /
• 2007

본 연구는 도로나 교량 등 공공시설물을 파손하고 국민의 안전을 위협하는 과적차량을 단속하기 위한 업무를 지원하는 시스템을 개발하였다. 개발 과정에서 이동식 검문소의 야외 근무환경과 단속반원의 조작능력, 기동성, 휴대성 등을 고려하여 UMPC를 기반으로 한 이동식 과적단속시스템을 개발하였다. 시범적용 결과, 과적적발자료 작성 시 시간절감과 단속실적보고 업무 등에 효과가 있는 것으로 파악되었다.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.6
• /
• pp.76-95
• /
• 2019

An on-board truck scale is an essential technical solution for preventing overload, which makes the driver aware of the commercial vehicle weight. This study analyzed the effects of the driving pattern and transportation efficiency by the IoT Platform service for an on-board truck scale. A comparison of before and after installation using the long-term monitored data confirmed the reduction effects both of the overload ratio and overweight value, and their effects on increasing the transportation efficiency. In addition, the analysis result of the driving route showed that the installation of an on-board truck scale could be a more effective way of preventing overload than increasing the weighing checkpoints.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.6
• /
• pp.74-87
• /
• 2020

Overloaded trucks are the main source that threatens road safety and directly affects the reduction of pavement life. The On-board truck scale is the only equipment that could prevent overloading by measuring and adjusting the loading weight before driving. Legislation is needed to encourage its installation so that the driver can prevent overloading. In this study, an on-board truck scale system was installed on 30 dump trucks for transporting construction waste, such as soil and aggregates, which are major loads of 36.55% for overloading, and the trucks were monitored remotely. The overload prevention effect was analyzed by comparing driving data for 1 month before distribution of the weight display app that can recognize the weight to the driver and 1 month after distribution. After installation, overloading could be 6.1% reduced, and the transportation efficiency could be increased by checking the weight provided from the On-board truck scale system.

• 한국ITS학회:학술대회논문집
• /
• 2010.05a
• /
• pp.151-156
• /
• 2010

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.2 no.1
• /
• pp.81-88
• /
• 1998

과적차량의 통행에 의한 교량구조물의 손상도를 평가하는 방법의 개발이 매우 활발하다. 본 연구에서는 과거 15년동안 통행한 교통데이타를 분석하고, 이 데이타를 근거로 교량의 손상도를 분석한다. 차량의 분류는 4종으로 대표하여 차량하중을 분석하였으며 해석시에는 이를 대표하는 2종을 사용하였다. 3차원해석을 통하여 구한 영향면을 이용하여 부재력을 계산하고 이를 이용하여 등가응력범위를 구한다. 이 결과는 모형실험을 통하여 구한 피로결과와 비교하였다. 분석결과 설계하중을 초과하는 과적차량이 교량에 미치는 손상정도는 적은 통행빈도에도 불구하고 매우 큼을 알 수 있고, 이러한 실제교통량의 분석을 통한 교량의 손상평가방법은 과적차량에 의한 교량손상정도를 유용하게 평가할 수 있다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.21 no.3
• /
• pp.225-232
• /
• 2008

Overload vehicles operate damage to road, bridge, and then increasing in maintenance and repair cost because structures are reduced durability. The existing regulation systems have many problems and need coping measure. Therefore, this paper organized Ubiquitous sensor network system for development of intelligent auto overload vehicle regulation system about high speed vehicles, also axial load WIM sensor was selected by indoor experiment through wireless protocol. And we examined possibility U-load auto overload vehicle regulation system through experiment of the transmission and reception distance. If this system will apply to road and bridge, might be effective for economy and convenience through establishment of U-IT system. And high speed vehicle that was amalgamate IT technology and existing overload regulation problems, also tested wireless sensor for USN organization. This experiment aim to organize system interface for user through perfection man-less, wireless system of Internal/External Network from high speed WIN sensor with USN organization. Accordingly, it is necessary experimentation through Test Bed for constitution External network and application of actually regulations using WCDMA/HSDPA.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.2
• /
• pp.63-73
• /
• 2016

On January 16 to May 31, 2012, Korea Expressway Corporation was carried out an pilot overweight enforcement using high-speed weigh-in-motion at Gyeongbu expressway 195.0k (Gimcheon) and Jungbunaeryuk expressway 119.5k (Seonsan). In this study, it is attempted to analyze the practical effect of high-speed weigh-in-motion by comparing the average total weight and traffic volume of eight weeks before and after the these overweight enforcement, respectively. The main results are as follows: First, the result of analysis of the change in average total weight and traffic volume, it was found that it did not differ after as in previous traffic volume, and the total weight is reduced. This means that the total weight is not reduced by decreasing freight traffic, but by decreasing the total weight. Therefore, it can be seen that there is an effect of pilot overweight enforcement using high-speed weigh-in-motion. Second, the average total weight and total weekly traffic volume decreased rapidly starting from the start of the overweight enforcement, but there was showing a tendency to increase gradually again.