• International Journal of Highway Engineering
• /
• v.13 no.3
• /
• pp.15-20
• /
• 2011

This study was conducted to evaluate the characteristics of installation dimensions of speed control humps based on the theoretical dynamic analyses. The field surveys of speed control humps were performed first to compare their sizes with those suggested in the installation standard. Then, the displacement response spectra under impact loads were obtained using the single degree of freedom models where the vehicle and human were assumed to combine completely. The analysis results showed that the human perception became larger as the width and height of the humps increased, but the extremely higher uncomfortableness should be avoided. In addition, the ratio between the width and height should be considered when the humps are designed and installed because the ratio governs the vertical acceleration magnitude.

• Journal of Korean Society for Geospatial Information Science
• /
• v.21 no.3
• /
• pp.55-62
• /
• 2013

This paper aims to detect Speed Bump by using Omni-directional Camera and to suggest Real-time update scheme of Speed Bump through Vision Based Approach. In order to detect Speed Bump from sequence of camera images, noise should be removed as well as spot estimated as shape and pattern for speed bump should be detected first. Now that speed bump has a regular form of white and yellow area, we extracted speed bump on the road by applying erosion and dilation morphological operations and by using the HSV color model. By collecting huge panoramic images from the camera, we are able to detect the target object and to calculate the distance through GPS log data. Last but not least, we evaluated accuracy of obtained result and detection algorithm by implementing SLAMS (Simultaneous Localization and Mapping system).

• Journal of Korean Society of Transportation
• /
• v.35 no.4
• /
• pp.261-277
• /
• 2017

This study defines influencing sections as the part of the road section where passing vehicles are traveling with the lower speed compared to speed limit due to speed humps. The influencing section was divided into 3 parts; influencing section before the speed hump, interval section, and influencing section after the speed hump. This analysis focused on the changes of each part depending on installation types, vehicle types, and daytime or nighttime. For the interval section, especially, the ratio of distance traveled with lower speed than speed limit to interval section is defined as effective influencing section ratio to be analyzed. Vehicle speed profiles were collected with a speed gun to extract influencing section lengths. The survival analysis was applied and estimated survival functions are compared with each other by several statistical tests. As a consequence, the average length of influencing section on the 50m sequential speed humps was 75.3% longer during the deceleration than that of isolated speed hump, and 18.9% during the acceleration. The effective influencing section ratio for the 30m and 50m sequential speed humps had a small difference of 81.0% and 76.0% while the absolute values of the section that passing speed were less than the speed limit were longer on 50m sequential speed humps, each being 24.3m and 38.0m. Using the log rank test, it was evident that sequential speed humps were more effective to increase the length of influencing sections compared to the isolated speed hump. Vehicle type was the strong factor for influencing section length on the isolated speed hump, but daytime or nighttime was not the effective one. This research result can be used for improving the efficiency selecting the installation point of speed humps for road safety and estimating the standard of the distance between sequential speed humps.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.6
• /
• pp.1075-1082
• /
• 2016

In order to calculate the optimum installation interval between a speed hump and hump type crosswalk that are installed continuously in succession, this study examined the speed of a vehicle that passes different intervals between speed humps and hump type crosswalks from the approach section of a roundabout having a maximum speed limit of 30km/h; analyzed the effects of speed humps and hump type crosswalks installed continuously in succession on vehicle driving speed; and simulated the optimum installation height of hump type crosswalk. As a result, the following conclusion was drawn. First, it was found that the optimum interval between a speed hump and hump type crosswalk, which are the representative traffic calming techniques for reducing vehicle speed, to control vehicle speed under 30km/h is 30m. Second, as a result of comparing the deceleration of a vehicle that pass hump type crosswalks, it was found that if the installation interval is 65 m and above, a speed hump and hump type crosswalk had no effect. Therefore, it is desirable that the maximum installation interval between a speed hump and hump type crosswalk for controlling vehicle speed within a fixed road section should not exceed 65m. Third, the analysis showed that the optimum installation height of hump type crosswalk is 6-8cm in case vehicle speed at the approach section is 20km/h or lower, 8-10cm in case of 30km/h, and 10cm in case of 30km/h or higher, respectively. Fourth, even at a road section on which a speed hump and hump type crosswalk are installed, speed reduction effects may sometimes be insignificant due to a driver's studying effect, traffic conditions and so on. Thus, it is judged that speed reduction effects will be greater if several traffic calming techniques such as speed hump, chicane, and choker are applied at the same time. Therefore, in case of applying traffic calming techniques for the purpose of reducing vehicle speed in order to promote pedestrian safety, the composite application of several techniques should be considered.

• Journal of Digital Convergence
• /
• v.14 no.5
• /
• pp.325-331
• /
• 2016

In driving at evening or night, we are not able to recognize the speed bump and so stop suddenly. It could result in accidents. And also, we have a restriction of street light installation in farm road because it could be harmful to the crops and driver could not recognize the walking people. It needs to develop the speed bump with light and streetlight to be non harmful to the crops. So, we develop both the speed bump and streetlight with LED which could be non harmful to the crops and be increased recognition of walking people in farm road. For LED lighting power, we use the solar cells, and piezoelectric elements. It has automatic on/off according to power saving rates without illumination sensor. Minimization of circuit elements and design of minimum resisters and low power LED was used for power saving in assuring 3-days.

• Proceedings of the KOR-KST Conference
• /
• 1999.10a
• /
• pp.129-134
• /
• 1999

• Composites Research
• /
• v.35 no.4
• /
• pp.277-282
• /
• 2022

In this study, a smart material applicable to speed bumps was developed using low-cost starch and waterbased suspensions, and their properties were investigated. Viscosity and shear stress according to the shear rate was measured by a rheometer to observe shear thickening behavior according to starch concentration. The shear thickening phenomenon and applicability to speed bumps were identified macroscopically via drop weight test and bike driving test, measuring the vibration after impact with a driving speed of 5-25 km/h. As a result of the viscosity measurement, shear thickening occurred after the shear thinning region at the beginning, and the critical strain causing the shear thickening phenomenon decreased as the concentration of starch increased. Also, the viscosity and shear stress increased significantly with the increase of the starch concentration. As a result of the drop weight test and the bike driving test, the suspension was changed to a solid-like state in a short time, and the impact energy was absorbed in the fluid. The shear thickening phenomenon easily occurred as the concentration of the fluid and the applied impact (velocity) increased. Therefore, it can be proposed the development of a smart speed bump material that operates in the range of 5-25 km/h with a Non-Newtonian fluid based on water and starch.

• International Journal of Highway Engineering
• /
• v.14 no.4
• /
• pp.103-111
• /
• 2012

PURPOSES : Effective speed management is necessary for preventing traffic crashes on the road. Speed hump is known as an effective tool for managing speed. Unlike existing studies which are mainly focused on humps for vehicles, this study proposed a novel method to determine design parameters for bicycle speed humps based on a multi-criteria decision making process. METHODS : Three objectives including the effectiveness of speed reduction, bicycle safety, and user's comfortability were incorporated into the proposed evaluation framework for determining design parameters. A multi-criteria value function was also derived and utilized as a part of the proposed method. RESULTS : Extensive simulations and statistical tests show that an integrated bike-box way is identified as the best in terms of operational efficiency and safety. CONCLUSIONS : It is expected that the outcomes of this study can be a valuable precursor for developing design guidelines for bicycle road and facility.

• Journal of Korean Society of Transportation
• /
• v.14 no.4
• /
• pp.77-90
• /
• 1996

Recently existing the road traffic low is requlated by hump standard, which is established throuth the actual england TRRL(Transpodt and Road Research Laboratory) experiment. The determined standard has been utilized, however, wihtout the test on of our street and its drivers driving characteristics. Even with the utilization, the appropriate before and after management, is not constituted. In Spite of minimum speed limit, in many case, the utilization itself is questionalble rather than the purpose of restraining speed limit or reducing vehicle confacts. Along with hump consideration, social attention is focused due to series of personal law suit(traffic accident) field against the negligence of local organization management. Therefore counter measure of safe transportation facility is urgently required. With consideration of above background, the purpose of this research is to develop the hump that is appropriate with our transportation environment. This can be achieved thr ugh analysis of hump effectiveness, examination of drivers awamess, facilitation/management problems, and various problems in verticle acceleration.

• Journal of the Korea Convergence Society
• /
• v.8 no.11
• /
• pp.177-182
• /
• 2017

The purpose of the study is to investigate the intravenous access of paramedics in ambulance. The study consisted of confidence change in pre and post intravenous access by driving condition and speed of the vehicle. The research subjects were 30 119 paramedics (20 level 1 emergency medical technicians, 10 nurses), and 6 ambulance driving conditions were established in order to measure the number of attempts at intravenous access. The data was collected for 9 days from May 18 through May 27, 2017. The results show no disparities in number of attempts in terms of stop conditions and flat section driving conditions(p=.161) although there were significant disparities in unpaved road(p=.003), speed bump(p=.005), curve(p=.022), and slope(p=.003) section driving conditions. Confidence appeared to significantly rise(p=.000) after the experiment. In conclusion, it is recommended that swift intravenous access inside an ambulance while driving is attempted when the vehicle has come to a stop or a flat section and paramedics should maintain their confidence in intravenous access through continued training.