• Journal of the Korean Society of Propulsion Engineers
• /
• v.6 no.3
• /
• pp.37-43
• /
• 2002

There have been numerous experimental studies for heat transfer measurement technique. This study investigates optical methods for measuring local heat transfer coefficient using thermochromic liquid crystal. Transient and steady methods have been utilized to measure local heat transfer coefficient on a cylinder with a cross flow. The steady method is based on the heat-coating technique and two transient methods adopt by-pass technique and insertion technique, respectively. Both techniques of transient method employ heating technique in which the flow is heated by using the electric heater and cooling technique which cools the preheated cylinder. Experimental results indicate that each methods have nearly similar results. Detailed discussions have been made for its own advantages and disadvantages.

• Journal of Advanced Marine Engineering and Technology
• /
• v.27 no.5
• /
• pp.581-588
• /
• 2003

Heat transfer characteristics of a pair of longitudinal vortices using a transient liquid crystal technique are studied experimentally. In order to control the strength of longitudinal vortices, angle of attack of the vortex generators is $20^{\circ}$and the length of space from the centerline the vortex generations is 25mm apart. The heat transfer measurements using a transfer coefficients. The following conclusions are obtained from the present experiment. When any vortex generators are not set up in wind tunnel test, heat transfer rate is low respectively. However, with the vortex generators of rectangular winglet, the heat transfer on the local surface can be enhanced.

• Journal of Advanced Marine Engineering and Technology
• /
• v.29 no.1
• /
• pp.68-77
• /
• 2005

A transient liquid crystal technique has become one of the most effective ways in measuring the local heat transfer coefficients on the entire surface. The key Point of this technique is to convert the inlet flow temperature into an exponential temperature profile using a mesh heater. In order to verify the validity of this technique. the heat transfer characteristics on the wall surface by a pair of longitudinal vortices is investigated experimently and numerically. A standard ${\kappa}-{\varepsilon}$ is used for the numerical analysis of turbulent flow field. It is found from experiment and numerical analysis that two peak values exist over the whole domain. as the longitudinal vortices move to the farther downstream. these peak values decrease and the dimensionless averaged Nusselt number with the lapse of time is maintained nearly at constant values. The experiment results obtained from the present experiment in terms of the transient liquid crystal technique are in good agreement with the numerical results. Therefore, the transient liquid crystal technique developed for the measurement of heat transfer coefficient is proved to be a valid method.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.11
• /
• pp.1618-1629
• /
• 2003

The effects of the interaction between flow field and heat transfer caused by the longitudinal vortices are experimentally investigated using a five hole probe and a transient liquid crystal technique. The test facility consists of a wind tunnel with vortex generators protruding from a bottom surface and a mesh heater. In order to control the strength of the longitudinal vortices, the angle of attack of vortex generators used in the present experiment is 20$^{\circ}$, and the spacing between the vortex generators is 25mm. The height and cord length of the vortex generator is 20mm and 50mm, respectively. Three-component mean velocity measurements are made using a f-hole probe system, and the surface temperature distribution is measured by the hue capturing method using a transient liquid crystal technique. The transient liquid crystal technique in measuring heat transfer has become one of the most effective ways in determining the full surface distributions of heat transfer coefficients. The key point of this technique is to convert the inlet flow temperature into an exponential temperature profile using the mesh heater set up in the wind tunnel. The conclusions obtained in the present experiment are as follows: The two maximum heat transfer values exist over the whole domain, and as the longitudinal vortices move to the farther downstream region, these peak values show the decreasing trends. These trends are also observed in the experimental results of other researchers to have used the uniform heat flux method.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.30 no.7 s.250
• /
• pp.656-662
• /
• 2006

The effects of concave hemispherical surface with inclined angle on the local heat transfer from a turbulent round jet impinging were experimentally investigated using transient liquid crystal method. This method suddenly exposes a preheated wall to an impinging jet and then the video system records the response of liquid crystals for the measurement of the surface temperature. The Reynolds numbers were used 11000, 23000 and 50000, nozzle-to-surface distance ratio from 2 to 10 and the surface angles $\alpha=0^{\circ},\;15^{\circ},\;30^{\circ}\;and\;40^{\circ}$. Correlations of the stagnation point Nusselt number according to Reynolds number, jet-to-surface distance ratio and dimensionless surface angle are investigated. In the stagnation point, in term of $Re^n$, n ranges from 0.43 in case of $2{\leq}L/d\leq6$ to 0.45 in case of $6. The maximum Nusselt number occurs in the direction of upstream. The displacement of the maximum Nusselt number from the stagnation point increases with increasing surface angle or decreasing nozzle-to-surface distance. The maximum displacement is about 0.7 times of the jet nozzle diameter.

• Journal of KIISE:Software and Applications
• /
• v.36 no.8
• /
• pp.616-622
• /
• 2009

Thanks to Dynamic Capacitance Control (DCC) technique, response time of an LCD display has greatly improved. However, DCC requires hi-speed memory for the real-time writing/reading of an image of a previous frame, which results in increases in hardware overhead and cost. In this paper, we propose Modified Exponential Golomb (MEG) coding, a low-complex high-speed image compression method, which can remarkably reduce memory requirement for DCC. We also propose a pixel-wise DCC switching technique to prevent a compression error from affecting the quality of a final image on LCD. In our experiment, the degradation in visual quality was not noticeable when we cut the DCC memory size of 1080i HD data by 1/3.

• Proceedings of the Korean Information Science Society Conference
• /
• 2001.10b
• /
• pp.142-144
• /
• 2001

최근 E-Business가 활성화됨에 따라 고객의 특성을 파악해서 고객 개인의 관심에 부합되는 개인화 된 정보나 서비스를 제공할 것이 요구되고 있다. 무선 인터넷을 이용한 서비스가 증가하고 있지만 대부분의 서비스 시스템들은 사용자 개인의 성향은 고려하지 않고 모든 사용자에게 획일적인 서비스를 제공한다. 무선 환경일수록 이러한 무분별한 광고는 오히려 고객의 만족도를 감소시킬 수 있다. 따라서 각각의 고객에게 취향과 관심 분야에 따른 차별화 된 서비스가 필요하다. 기존의 e-mail 시스템들은 모든 사용자들에게 단지 질의한 응답만을 제공하거나 똑같은 광고성 메일을 전달한다. 즉, 개인의 성향은 고려하지 않은 응답 결과를 보여주었다. 이에 본 논문에서는 휴대하기 편리한 이동 단말기의 특성을 이용하여 시,공간적 제약을 극복하고 작은 단말기 액정화면을 통해 정보를 일일이 검색해야 하는 번거로움을 덜어줄 수 있는 XML 기반의 무선단말기용 맞춤 서비스 시스템을 설계하였다. 이를 위해 e-mail 헤더 정보를 이용하여 사용자별로 분류하였고 텍스트마이닝 기법을 적용해 추출된 토픽과 사용자 프로파일 정보를 통해 예측된 사용자의 관심분야에 따른 카테고리를 계산하여 템플릿에 매정함으로써 맞춤 서비스를 제공하는 시스템을 설계한다. 이로 인해 무선에서 제공하는 서비스의 질을 향상시키고 사용자에게 편리함과 흥미를 유발할 수 있다.

• Proceedings of the KIPE Conference
• /
• 2003.07b
• /
• pp.616-620
• /
• 2003

액정 디스플레이의 백라이트에 사용되는 냉음극 방전램프(CCFL: Cold Cathode Fluorescent Lamp) 구동 인버터의 설계함에 있어 압전 변압기(Piezoelectric Transformer)를 사용하였으며, 파라미터 선정 및 최적화를 하여 실험을 통해 검증하였다. 적용한 압전 인버터로는 푸시-풀(Push-pull)과 하프-브리지(Half-bridge) 회로이며, 휘도 제어기법으로는 아날로그(Analog)와 버스트(Burst) 방법을 사용하였다. 푸시-풀 인버터의 경우 아날로그 제어방식으로 제어전압 2.5-4.5V에서 출력전류 1-6mA(최소)로 휘도 0-100$\%$ 특성을 보였다. 입출력 효율로 18.6(최소)-90.3(최대)$\%$를 얻었으며, 버스트 제어방식에서는 듀티비 50-5$\%$에서 1-6mA의 제어 성능을 보였다. 인버터의 입출력 효율은 13.6(최소)-82.1(최대)$\%$를 얻었다.

• Proceedings of the KIPE Conference
• /
• 2003.11a
• /
• pp.197-201
• /
• 2003

액정 디스플레이의 백라이트에 사용되는 냉음극 방전램프(CCFL: Cold Cathode Fluorescent Lamp) 구동 인버터의 설계함에 있어 압전 변압기(Piezoelectric Transformer)를 사용하였으며, 파라미터 선정 및 최적화를 하여 실험을 통해 검증하였다. 적용한 압전 인버터로는 푸시-풀(Push-pull)과 하프-브리지(Half-bridge) 회로이며, 휘도 제어기법으로는 아날로그(Analog)와 버스트(Burst) 방법을 사용하였다. 푸시-풀 인버터의 경우 아날로그 제어방식으로 제어전압 2.5-4.5V에서 출력전류 1-6mA(최소)로 휘도 $0-100\%$ 특성을 보였다. 입출력 효율로 18.6(최소)-90.3(최대)$\%$를 얻었으며, 버스트 제어방식에서는 듀티비 $5-50\%$에서 1-6mA의 제어성능을 보였다. 인버터의 입출력 효율은 13.6(최소)-82.1(최대)$\%$를 얻었다.

• Proceedings of the KSME Conference
• /
• 2000.11b
• /
• pp.87-92
• /
• 2000

This study is to investigate the heat transfer characteristics the for a round turbulent jet impinging on the flat plate with and without rib. Liquid crystal/transient method was used to determine the Nusselt number distributions along the surface. The temperature on the surface was measured using liquid crystal and a digital color image processing system. The experiments were made fur the jet Reynolds number (Re) 23,000, the dimensionless nozzle-to-surface distance (L/d) from 2 to 10, and the rib type [height ($d_1$) 2mm, pitch (p) from 12 to 36mm]. It was found that for $L/d{\ge}6$ the average Nusselt numbers on the flat plate with rib type C ($p/d_1=16$) are higher than those without rib, mainly due to an increase in the turbulent intensity caused by flow separation, recirculation and reattachment on the wall surface.