• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2002.04a
• /
• pp.64-64
• /
• 2002

Two dimensional velocity distributions outside a Mach 2.0 supersonic nozzle have been investigated using digital particle image velocimetry (PIV). Mean velocities, turbulence intensities, vorticity field and volume dilatation field are obtained from 300 instantaneous PIV images using 0.33 $\mu\textrm{m}$ $TiO_2$ particle. The seeding particle of larger size, 1.4 $\mu\textrm{m}$ $TiO_2$, is also used for the experimental measurements of velocity lag downstream of shock waves according to particle sizes. The results have been compared and analyzed with schlieren photographs and computational fluid dynamics (CFD) results for the velocity distribution, the locations of shock waves and over-expanded shock structure. It was shown that the locations of normal shock and shock waves can be resolved by the axial or radial velocities, and the velocity lag is more significantly increased due to particle inertia as a particle size increases. And it was also found that over-expanded shock structures call be predicted by volume dilatation fields, and streamwise turbulence intensities are influenced significantly by normal shock waves.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.05a
• /
• pp.343-346
• /
• 2008

Unsteady 3D flowfields generated by transverse fuel injection into a supersonic mainstream are simulated with a DES turbulence model. Comparisons are made with experimental results in term of the temporal eddy position and eddy formation frequency. Results indicate that the DES model correctly predicts the convection characteristics of the large scale eddies. However, it is also observed that the numerical results slightly overpredict the eddy formation frequency.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2001.04a
• /
• pp.41-50
• /
• 2001

한반도 주요 지체구조구에 대한 최대지진을 지진 및 지질자료를 이용하여 여러 가지 방법으로 결정하였다. 한반도에서 발생한 가장 큰 지진은 MMI IX - X의 범위에 걸치며 이는 M= 7.0 - 7.7 에 해당한다. Gumbel의 극대치 제3분포를 이용하면 지체구조구별 최대지진은 M = 7.1 - 7.9의 범위에 놓이고, 응력방출 양상을 분석하면 M = 6.7 - 7.7 가 도출된다. 단층길이와 규모와의 상관관계에서 최대지진은 M = 7.4 - 7.6 에 놓인다. 한반도의 주요 지체구조구 사이에 최대지진의 현격한 차이를 나타내는 지진 및 지질학적 증거는 없다. 역사지진의 평가에서 강진들은 대략 1 계급( M=0.7) 과대 평가되는 경향이 있으므로, 한반도의 최대지진은 대략 M = 7.0으로 추정된다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.829-832
• /
• 1997

It is difficult to explain the effects of complex variable loading experienced by the machine and the structure only with the studies of the single-overload itself. Hence, it is thought that the variation of overload-holding time are required to explain the effects more clearly. The effects of the overload were analyzed by means of the crack retardation, and the fractography on retardation zone. A characteristic of the fractography on retardation zone was that striation distribution did not appear due to decreased crack driving force. Rotary bending fatigue tests were performed with the circular shaft which has two hole defects.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1994.04a
• /
• pp.158-163
• /
• 1994

본 논문에서는 진동테이블의 가속도스펙트럼에 대한 치구 위의 제어점 및 시험물부착점들에서의 가속도스펙트럼을 실제 진동시험조건에서 낮은 진동레벨로 측정한 후, 측정된 전달함수를 이용하여 기준스펙트럼과 시험물 부착점들에서의 스펙트럼의 창를 최소화하기 위한 진동테이블(armature table)에서의 가속도스펙트럼 및 제어점에서의 기준스펙트럼을 최소자승법(Least Square Method)의 원리를 적용하여 구하는 방법을 제안하였다. 본 방법은 시험규격에서 정해진 기준스펙트럼으로 제어할 경우와 제안된 기준스펙트럼으로 제어할 경우, 시험물부착점들로 전달되는 스펙트럼을 컴퓨터 시뮬레이션을 통해 간단히 예측할 수 있으므로 제안 전.후 결과를 쉽게 비교, 확인할 수 있고 실험을 통해 이를 증명하므로서 본 논문에서 제안된 방법의 유용성을 확인할 수 있었다. 이와 같이 제안된 기준스펙트럼을 랜덤진동제어의 기준스펙트럼으로 사용하므로서 시험규격에 정해진 기준스펙트럼을 가능한 정확히 시험물에 전달할 수 있고, 시험물부착점들에서의 과대시험 또는 과소시험을 최대한 줄이므로서 보다 정확한 진동시험을 수행할 수가 있다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.05a
• /
• pp.725-729
• /
• 2000

This paper presented a new model of NC verification in ball end milling. The model verifies the over cut the under cut and the surface roughness using NC file generated from CAM and cutting condition. The model uses Z-map model to verify workpiece. In this paper, the model used the velocities of x, y and z direction and obtained a center point of a ball end mill for modeling Z-map of workpiece. To investigate the performance of the model simulation study was carried out. As the results, the model gave geometry accuracy of workpiece, the surface roughness and the chip loads in finish cutting that can predict tool chipping.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.683-688
• /
• 1994

Recently, the Z-Map model has been used widely to represent the three dimensional geometric shape and to achieve the cross-section and point evaluation of the shape. In this paper, the CNC cutting planning and simulation modules for product with three dimensional geometric shape are realized based on the Z-Map model. The realized system has the various capabilities related to the automatic generation of tool path for the rough and finish cutting processes, the automatic elimination of overcut, the automatic generation of CNC program for a machining center and the cutting simulation. Especially, the overcut-free tool path is obtained by using the CL Z-Map models which are composed of the offset surfaces of the geometric shape of product.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.11a
• /
• pp.207-212
• /
• 2006

The development of practical utilization way of water repelling technology for manufacturing of fruiting bag was main purpose of this study. The water repelling technology was developed by wax emulsion coating The wax emulsion was manufactured at Chungsan chemical(Co) on pilot scale. The coating paper was tried in plant coater of Agro(Co). The water repellency of wax emulsion coated paper was good as fruit bagging paper.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.11a
• /
• pp.193-199
• /
• 2006

Fruit bagging paper is used for protecting of fruits from insect and/or microorganisms. Generally, fruit bagging paper controled light, temperature and humidity and then it is used for good fruit color, size and taste. The physical properties of conventional(domestic and abroad) fruiting bag and wrapping paper were analyzed and compared to each other. And also, the optical properties of conventional(domestic and abroad) fruiting bag and wrapping paper were analyzed and compared to each other. The chemical additives and residual herbicide in conventional fruiting bag and wrapping paper were analyzed and compared to each other. The analyzed data was bench marked for developing water repelling paper and embossing paper.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.11a
• /
• pp.201-206
• /
• 2006

Embossing treated fruit bagging paper was prepared with newly designed embossing roll and mechanical properties of fruit bagging paper were evaluated. The embossing technology was developed. First of all, embossing roll was designed in Ginyong Embo(Co) for the embossing process of fruiting bag. The embossing treated fruit bagging paper was manufactured in Agro(Co) at plant scale. The mechanical properties of embossing paper was investigated and operation efficiency of bagging was tested at field. The properties of embossed paper was quit satisfied for fruiting bag for cultivation of apple and pears.