• 한국수소및신에너지학회논문집
• /
• 제29권5호
• /
• pp.497-502
• /
• 2018

In Korea, passenger car and van using LPG fuel including taxi constantly increased due to the high cost of fuel. Recently, the emission standard has continuously tightened in the world. In this investigation was conducted the greenhouse gas emission characteristics of LPG vehicles according to the displacement and weight. Exhaust emission characteristics of 13 test LPG vehicles from about 1.0 L to 3.0 L displacements were measured and analyzed by using chassis dynamometer and emission analyzer. It is revealed that the greenhouse gas emission was showed the increasing tendency as the displacement and curb weight increased. Also, greenhouse gas emission of SC03 driving cycle has highest value and that of HWFET driving cycle shows the lowest value.

• 한국기계가공학회지
• /
• 제10권2호
• /
• pp.84-89
• /
• 2011

This paper studied the carburizing of chromium molybdenum steel which the heat treatment effect of gear geometric tolerance, OPD, Runout, the surface hardness, the maximum hardness, the core hardness and the bending fatigue strength were investigated. Firstly, the deformation is observed, and the results of circularity, squareness, OPD and Runout of SCM822, SCM425, and SCM415 are obtained in order. Secondly, in order to investigate the gear hardness, the surface hardness, the maximum hardness and the core hardness of SCM822, SCM425, and SCM415 are obtained; and the surface hardness of SCM822 is about 10% higher than SCM415's, and about 3% higher than SCM425's. Thirdly, the fatigue strength of SCM822 is about 10% higher than SCM415's, and about 7% higher than SCM425's in the fatigue test results. At last, for the purpose of the minimum deformation of heat treatment, and also the improvement of fatigue strength, the best gear material is SCM822 in this test.

• 한국광학회지
• /
• 제16권1호
• /
• pp.71-78
• /
• 2005

대형 비구면의 측정을 위하여 자동무수차점 방식의 2매 구성 널 렌즈를 설계하였고, 제작과 정렬 오차에 따른 측정 정밀도의 한계를 이론적으로 분석해 보았다. 측정 정밀도의 한계를 결정짓는 주요한 공차 요소는 널 렌즈면의 불규칙도(irregularity)임을 확인하였으며, 불규칙도의 가공 정도에 따라 5λ/100∼4λ/1000 정도까지의 신뢰할 수 있는 측정 정밀도가 한정지어졌다. 이로써 실제의 정렬 오차 및 널 렌즈 제작오차까지 고려하여 신뢰할 수 있는 정밀도 한계를 제시할 수 있었다.

• 한국전자파학회논문지
• /
• 제18권6호
• /
• pp.577-583
• /
• 2007

Schroeder 방식의 QRD(quadratic Residue Diffuser) 구조에서 더욱 진화한 경사진 QRD를 사용하여 전자파 잔향실(reverberation chamber) 내의 전자기장 균일도를 향상시켰다. FDTD(Finite-Difference Time-Domain) 수치 해석방식을 이용하여 $2{\sim}3GHz$ 대역에서의 전자파 잔향실 내의 전자기장의 분포를 해석하였다. QRD 경사 각도의 조절과 경사 방향을 전환하여 전자파 잔향실 내부의 시험 공간에서의 E_x,\;E_y,\;E_z$ 샘플의 표준편차 및 공차가 각각 0.3 dB, 2.5 dB 향상되고 전체적으로 전자기장 분포의 균일성이 확보되었다.

• 대한산업공학회지
• /
• 제29권1호
• /
• pp.21-31
• /
• 2003

Determination of operational dimensions and tolerances is complex if there exist inconsistencies between operational and design specifications. Dimension and tolerance charts (D&T charts) have been used to establish the relationships among operational dimensions in complex machining. This chart proves that individual operations can be harmonized when they are interconnected. However, it is hard to generate the chart manually. Because operational dimensions and tolerances must meet the design specifications, the dimensions and tolerances of interconnected operations have to be verified serially for economical operations. In this paper, the chart is automatically generated from the interconnected operations. More importantly, all operational dimensions and tolerances displayed in the chart have been verified by using LP to meet the design specifications. Finally, the chart is converted to an operational routing sheet that contains a detailed process plan along with cutting speed, feed rate, and operational references based on material hardness, surface finish, and tool nose radius.

• 품질경영학회지
• /
• 제30권4호
• /
• pp.58-67
• /
• 2002

Since the inception of off-line quality control, it has drawn a particular attention from research community and it has been implemented in a wide variety of industries mainly due to its extensive applicability to numerous real situations. Emphasizing design issues rather than control issues related to manufacturing processes, off-line quality control has been recognized as a cost-effective approach to quality improvement. It mainly consists of three design stages: system design, parameter design, and tolerance design which are implemented in a sequential manner. Utilizing experimental designs and optimization techniques, off-line quality control is aimed at achieving product performance insensitive to external noises by reducing process variability. In spite of its conceptual soundness and practical significance, however, off-line quality control has also been criticized to a great extent due to its heuristic nature of investigation. In addition, it has also been pointed out that the process optimization procedures are inefficient. To enhance the current practice of off-line quality control, this study proposes an integrated optimization model by utilizing a well-established statistical tool, so called response surface methodology (RSM), and a tolerance - cost relationship.

• 대한교통학회지
• /
• 제21권3호
• /
• pp.143-156
• /
• 2003

도시로의 집중현상에 따라 차량이 증가함으로 한정된 공간에서의 도시교통난이 계속 악화되고 있는 실정이다. 도로상의 불법 주ㆍ정차위반차량으로 인해 차량소통에 불편을 주고, 주거 및 교통환경을 저해하기 때문에 견인업무는 주차정책을 실현시키는 강력한 수단으로써 반드시 필요하지만, 우리나라에서 불법 주ㆍ정차 차량의 견인부분에 대한 연구 및 결과는 극히 미비한 실정이다. 이에 따라 본 연구에서는 우리나라 주요 도시를 대상으로 불법 주ㆍ정차 차량의 견인운행 실태 및 특징을 비교, 견인제도의 문제점을 분석하여 개선방안을 검토하고자 하였다. 이의 내용으로는 각 시에서 추진 및 계획중인 지능형 교통체계(ITS), 버스 정보시스템(BIS) 및 차량 위치 자동 표시기(AVM)를 연계시켜 공차거리를 줄이는 등의 첨단체계를 구축하여 견인차량에 대한 운영을 효율적으로 하여야 할 것이고, 요금의 구조도 서울을 제외한 기존의 3단계 톤급별 요금구조에서 장래 대형차의 견인을 감안한 4단계의 톤급별 요금구조로의 조정방안이 필요하다. 견인비용에 있어서도 대부분의 도시가 수년전의 여건을 근거로 산출한 결과를 기준으로 요금을 징수하고 있어 현실에 맞지 않는 요금체계를 적용시키고 있는 실정이다. 따라서, 견인비용부분에 대하여도 장래의 경제여건을 감안한 탄력적 요금체계를 설정하여 경영합리화를 유도함이 바람직하다. 부가하여, 견인원가에 대한 사례분석 결과는 부천시를 중심으로 하여 현실성 있는 견인비용을 제시코자 하였다.

• 한국정밀공학회지
• /
• 제21권6호
• /
• pp.102-108
• /
• 2004

This study addresses the contamination sensitivity test of a typical fuel pump for automotive vehicle. The objective of the study is to find the contamination sensitivity coefficient of fuel pump on specific contaminant particle sizes so that optimal fuel filter could be selected. To achieve the objective, the degradation of discharge flow rate of fuel pump was measured under the experiments of various contaminants size ranges of ISO test dust up to 80${\mu}{\textrm}{m}$. The fundamental theory of contamination sensitivity was introduced and the contamination sensitivity coefficients were estimated using the experimental data. Maximum contamination sensitivity coefficient of $5{\times}10^{-6}$ L/minㆍEa was found on the contaminant size range of 40${\mu}{\textrm}{m}$∼50${\mu}{\textrm}{m}$. The magnified picture of the surface of vane disc revealed that the abrasive wear was the principal cause of discharge flow rate degradation. Hence, this study revealed that high efficiency filter on the contaminant particle size range of 30${\mu}{\textrm}{m}$∼70${\mu}{\textrm}{m}$ especially should be used to maintain the service lift of the fuel filter.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2012년도 제38회 춘계학술대회논문집
• /
• pp.213-218
• /
• 2012

파열판이 양 끝에 부착된 액체 로켓 엔진의 자연 발화 점화기와 이에 활용 가능한 파열판에 관하여 문헌 조사를 수행하였다. 특허로 등록된 미국의 MC-1 엔진 및 러시아의 RD-170 엔진의 자연발화 점화기 설계와 NASA에서 사용된 파열판의 기본적인 성능이 분석되었다. 그리고 파열판의 종류, 특성, 성능과 이와 관련된 설계 인자와 ASME 표준이 조사되었다. 성능으로 파열압과 관련된 파열 공차, 역압, 흐름 교란, 파열 후의 조각 발생 여부, 재질, 작동 유체, 운영비 등이 있다. 또한 파열판 구조 해석과 관련된 문헌조사도 수행하였다.

• 한국의류산업학회지
• /
• 제24권3호
• /
• pp.325-332
• /
• 2022

The purpose of this study is to provide basic data for career guidance to cosmetology students by examining the effects of job stress on career decisions and job preparation behaviors. Overall 214 parts were empirically analyzed as final samples. Collected data and statistical processing are based on SPSS ver. Analysis was performed using the 21.0 program. An analysis of the effect of job stress on career decision showed that employment anxiety (β= .206, p<.05), job anxiety(β=.824, p<.05), and anxiety in career search(β=.118, p<.05) showed a statistically significant effect(+). However, employment concerns(β=-.312, p<.001) in career determination and employment concerns(β=-.223, p<.01) in career search are statistically significant parts(-). An analysis of the effect of employment stress on employment preparation behavior found that employment anxiety(β=.364, p<.05) has a statistically significant effect(+) on information use preparation, It was found that the statistically significant part(-) affects employment anxiety(β=-.188, p<.01). The study found that the more anxious cosmetology students are about employment, the more they plan and explore career options, and make information-based preparations for employment. Through this research, we hope that there will be lively discussions among cosmetology students on career adaptability, life satisfaction, and employment anxiety.