• Journal of the Korea Society of Computer and Information
• /
• v.19 no.10
• /
• pp.197-205
• /
• 2014

This study set out to develop a logistics rationalization model to reduce logistics costs including return route costs by using open information systems that overcame the limitations of the old closed logistics systems by the corporations and applying the principle of freight car sharing among them. In recent years, information infrastructure that can be easily shared by many such as information networks, however, One of the causes of rising logistics costs is high empty transfer rates on return routes after goods are transported from the distribution center of each company to consumption sites, It is propose to promote logistic efficiency and innovation. The study especially identified a logistics rationalization plan by examining and analyzing the stages of transportation on the circulation route of a distribution system from the distribution center of a corporation to consumption sites and the empty transfer rates and their current state.

• Journal of the Korean Society of Radiology
• /
• v.3 no.4
• /
• pp.23-28
• /
• 2009

Monochromatic X-ray can make a medical image of high contrast under a low radiation dose and can be easily generated by combining an X-ray tube and a multilayer mirror. A W/C multilayer mirror was optimally designed for a characteristic X-ray generated from a X-ray tube with Mo target. The d-spacing and the thickness ratio in design parameters were determined under the maximum-reflectivity condition. Tolerances for deposition and alignment of the W/C multilayer mirror were calculated. Within a deposition tolerance of 0.2nm and a alignment tolerance of ${\pm}0.01^{\circ}$, 85% of the theoretical peak reflectivity could be achieved. A multilayer mirror can be widely used for making medical images because of generating high fluence monochromatic X-ray.

• Korean Journal of Optics and Photonics
• /
• v.17 no.2
• /
• pp.149-158
• /
• 2006

We have analyzed various tolerances of the multi-configurative microscopic system for inspecting the wire-bonding of a reed frame by using the Gaussian bracket method and the equivalent lens method. The tolerances for the curvature and the thickness, which are axial symmetric tolerances, are given by varying the back focal length within a fecal depth under diffraction-limited conditions. Moreover, by using the trial and error method, the axial non-symmetric tolerances for decenter and tilt are established by assigning the 5% variation of MTF(modulation transfer function) at the spatial frequency of 50 lp/mm and at the field angle of 0.7 field. As the tolerances with the most probable distribution are distributed within the range of the decay rate of less than 5% independent of the probability distribution of tolerances, we can achieve completely the desired design performances of the multi-configurative microscopic system by using the various ranges of these tolerances.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.4
• /
• pp.66-73
• /
• 2004

Three species of Italian poplar (Populus euramericana), red pine (Pinus densiflora) and oriental oak (Quercus variabilis) were selected for this study. They were cut so that the distances between each of tips and roots for a pair of fingers were 0, 0.15, 0.30 and 0.45 mm. Poly vinyl acetate (PVAc) and resorcinol-phenol resin (RPR) were used for finger-jointing. Compressive test parallel to the grain was conducted for the finger-jointed specimens. The results were as follows: The efficiency of compressive Young's modulus of finger-jointed timber to solid wood indicated low values, whereas the efficiency of compressive strength indicated high values of more than 90% in all species, especially, it was found that those of red pine indicated markedly high values of more than 97%. The efficiency of compressive displacement of Italian poplar finger-jointed timber was 2 times higher than solid wood, and it was 1.2 and 1.3 times higher than solid woods in red pine and oriental oak, respectively. Also, it was found that 0, the distance between each tip and root for the fingers, indicated the highest efficiency of compressive strength performance in Italian poplar finger-jointed timber, and for red pine and oriental oak finger-jointed timbers, the distances of 0.15 and 0.30 were found to indicate the highest efficiency.

• Proceedings of the Safety Management and Science Conference
• /
• 2006.04a
• /
• pp.115-121
• /
• 2006

SCM 경쟁력 재고는 기업 내의 부문별 또는 개별기업 내부의 한정된 개선 노력이 외부의 부문 또는 기업에서의 활동과 연계되어 전체의 최적화가 되지 않으면 그 성과가 극히 제한적일 수 밖에 없다. 따라서 히든 코스트(hidden cost)의 발견 및 유통물류의 최적화에 박차를 가하는 것이 현실이다. 본 연구는 순 물류로 진행한 유통 경로 상에서 만약 역 물류가 발생할 경우 순물류 비용이외 공차(empty driving)로 인한 역물류의 히든 코스트를 최소화하는 모형을 통해 물류이익을 최대화 할 수 있는 방안을 찾기 위해 노력하며 결국 순물류와 역물류상의 유통상의 비용과 이익의 쌍대성에 기초하여 Pull, Push 시스템을 이용한 최적 시스템 모델화를 수행하여 효율적인 물류비용 산정의 방법을 모색한다.

• Korean Journal of Optics and Photonics
• /
• v.13 no.1
• /
• pp.51-57
• /
• 2002

We have calculated the optimum refractive index and normalized thickness of a single layer antireflection coating on the facet of buried channel waveguides as a function of waveguide width for several waveguide depths using the angular spectrum method and field profiles obtained by the effective index method (EIM) and the variational method (VM), respectively, and discussed the results. In the area of large waveguide width, the optimum parameters of a single layer antireflection coating obtained by both methods are almost the same. However, as waveguide width decreases, the parameters obtained by the VM approach those of a single layer antireflection coating between cladding layer and air, while those obtained by the EIM do not approach those, and the difference between the two parameters is large. The tolerance maps of the quasi-TE and quasi-TM modes obtained by the VM for square waveguides are located in almost the same area regardless of refractive index contrast, while those obtained by the free space radiation mode (FSRM) method for refractive index contrast of 10% are located in the different area. Thus, we think that the tolerance maps obtained by the VM are more exact than those obtained by the FSRM method.

• Journal of Korean Society of Transportation
• /
• v.19 no.4
• /
• pp.7-18
• /
• 2001

This study represents a first attempt in Korea to develop the simultaneous freight supply-demand model which considers the relationship between freight supply and demand. As the existing study was limited in one area, or the supply and the demand was separated and assumed not to affect each other, this study take it into consideration the fact that the demand affects supply and simultaneously vice versa. This approach allows us to diagnose a policy carried on and helps us to make a resonable alternative for the effectiveness of freight transportation system. To find a relationship between them, we use a method of econometrics. a structural equation theory and two stage least-squares(2SLS) estimation technique, to get rid of bias which involves two successive applications of OLS. Based on the domestic freight data, this study consider as explanatory variables a number of population(P), industry(IN), the amount of production of the mining and manufacturing industries(MMI), the rate of the effectiveness of freight capacity(LE) and the distance of an empty carriage operation(VC). This study describes well the simultaneous process of freight supply-demand system in that the increase of VC from the decrease of VC raises the cargo capacity and cargo capacity also augments VC. By the way. it is analyzed that the increment of VC due to the increase of the cargo capacity is larger than the reduction of VC owing to the increase of the quantify of goods. Therefore an alternative policy is needed in a short and long run point of view. That is to say, to promote the effectiveness of the freight transportation system, a short term supply control and a long run logistic infrastructure are urgent based on the restoration of market economy by successive deregulation. So we are able to conclude that gradual deregulation is more desirable to build effective freight market.

• Electronics and Telecommunications Trends
• /
• v.23 no.4
• /
• pp.147-155
• /
• 2008

고객으로부터 물품의 주문, 물품 생산, 출하, 상차, 배송 그리고 고객 인도로 이루어지는 SCM 상의 사이클에 있어서 운송 부분은 물류비의 50% 이상을 차지하고 있다. 일반적인 화물 운송의 경우 차량 단위로 적재하여 운송하게 되며, 이러한 차량의 운송비 절감은 수배송 경로 최적화, 차량 운행 및 상태 관리를 통한 운송 계획의 효율화, 차량의 혼적 운송, 공차율 감소 그리고 배차 관리를 통해 이루어질 수 있다. 이에 본 고에서는 물류 운송단계에서 운송 계획의 효율화와 운송비를 절감하기 위하여 적용 가능한 텔레매틱스 기술에 대해 살펴보고 물류 산업 적용 방안 및 관련 서비스 동향에 대해서 살펴보고자 한다.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2008.10a
• /
• pp.195-199
• /
• 2008

본 논문은 택시들의 승차율을 높이고 승객들의 대기시간을 최소화하기 위하여 제주 택시들의 이동이력 데이터를 기반으로 하여 공차들을 승객을 만날 가능성이 많은 지역으로 배치하는 기법을 제시한다. 이동이력 데이터에 포함된 공차 보고와 승차 보고 수 사이의 스케일 차이를 극복하기 위하여 전체수와 영역내 합에 대한 비율로 정규화하는 방법을 설명하고 장단점을 분석한다. 또 시간대별, 요일별, 주간별 택시들의 승객 대기시간에 대한 통계 데이터에 기반하여 가장 수요와 공급이 적정하게 유지되는 시간구간을 발견하고 이 구간에 대한 택시 분포와 현재의 택시 분포의 차이에 의해 수요보다 공급이 많은 곳의 택시를 재배치한다.

• Journal of the Korea Safety Management & Science
• /
• v.8 no.3
• /
• pp.125-141
• /
• 2006

If do not become whole optimization because enterprise's individual enterprise internal determinate improvement effort is associated with activity in enterprise SCM, competitive power can not but be extremely limited the result. Therefore, to spur in hidden cost's discovery and logistics' optimization is actuality. In this paper, as long as it is by logistics cost except empty driving if reverse logistics happens in distribution channel progressing, logistics reverse logistics' hidden cost through model that do minimization profit of logistics to look for plan that can do maximization try. Finally, is based on dual of distribution cost and profit of logistics and reverse logistics and achieves Pull, optimal system modeling that use Push system and gropes method of effective logistics cost.