• Journal of the Korean Institute of Telematics and Electronics
• /
• v.15 no.2
• /
• pp.15-18
• /
• 1978

The impedance step up ratio and variations of input admittances of the folded dipole antenna are calculated by the moment method. The results are compared with those calculated by Guertler's formula. The input admittance of the folded dipole antenna has the maximum value at the frequency somewhat lower than the resonance frequency and its susceptance which has periodic properly is null lot several different frequencies if radius ratio of two elements is not very large. Frequency characteristic of folded dipole antenna is improved when its radius ratio is increased.

• Korean Journal of Optics and Photonics
• /
• v.10 no.1
• /
• pp.68-72
• /
• 1999

We demonstrate a new pulse characterization scheme relying on self-heterodyning that uses intracavity frequency shifter in a fiber soliton laser with frequency shifted feedback. By heterodyning the frequency-shifted pulse stream with the unshifted one, and by measuring the beat strength with varying the delay length between two pulse streams, we obtain the amplitude autocorrelation function from which we estimate the pulsewidth. The result is in good agreement with that obtained by the autocorrelation relying on the second harmonic generation.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.6
• /
• pp.533-538
• /
• 2007

A semi-passive vibration isolation control method for enhancing pointing performance of on-board payload has been derived, and its effectiveness has been evaluated through numerical simulation. The semi-passive control law proposed in this study was derived so as to obtain the same performance as a high passive damping at low frequencies and obtain the same performance as a passive low damping at high frequencies. In the numerical simulation, the intended vibration isolation performance of the semi-passive control law has been obtained.

• The Journal of the Acoustical Society of Korea
• /
• v.17 no.2
• /
• pp.25-31
• /
• 1998

본 연구에서는 자동차 유리판에 초음파 대역 진동을 효율적으로 발생시킬 수 있는 압전 액츄에이터를 개발하고자 하였다. 자동차 유리판을 단순지지 평판으로 가정하였으며, 액츄에이터로는 PZT 진동자를 사용하였다. 유한 요소법(Finite Element Method)을 통하여 유리판의 최적 공진 주파수와 유리판에 부착할 압전 진동자의 구조 조건인 최적 위치와 개 수를 결정하였다. 설계 결과에 따라 자동차 유리판에 압전 진동자를 부착하여 임펄스 응답 해석(impulse response analysis)과 임피던스 해석(impedance analysis)을 수행하여 구동 주 파수를 확인하였다. 그 결과, 이 주파수로 가진하여 유리판 전면에 걸쳐 고른 초음파 진동이 분포함을 확인하였으며, 나아가 전기적 임피던스 매칭(impedance matching)을 통해 더 큰 효율의 진동을 발생시킬 수 있었다.

• The Journal of the Acoustical Society of Korea
• /
• v.17 no.4
• /
• pp.30-37
• /
• 1998

본 논문은 중공형 층상 복합체 멘드릴(mandrel)을 이용하여 기본 공진주파수가 15kHz이상이고, 우수한 감도 특성을 지닌 광섬유 하이드로폰의 최적 구조를 설계하는 것에 관한 것이다. 유한요소법을 이용하여 Al/foraming 및 Nylon/foaming층상 복합체의 공지주 파수를 분석하여 설계 변수의 범위를 결정하였고, 멘드릴 형상에 따른 광음향 감도 특성을 분석하여 최적구조를 결정하였다. 그 결과로 멘드릴의 외경이 감소할수록, 길이가 증가할수 록 감도가 향상되었다. AL 멘드릴의 경우, 내경/외경 비가 낮을수록, Nylon멘드릴의 경우 내경/외경 비가 높을수록 감도 증가를 위하여 효율적이다. 그리고 결정된 최적구조의 Al/foaming 및 Nylon/foaming멘드릴을 사용한 광섬유 하이드로폰의 감도는 각각 1rad./Pa 대비 약 82dB 및 85.7dB 정도 이었고, Al층상 복합체 보다는 Nylon층상 복합체를 이용하는 것이 고 감도의 광섬유 하이드로폰을 제조하는데 유리함을 알 수 있었다.

• The Journal of the Acoustical Society of Korea
• /
• v.12 no.4
• /
• pp.39-46
• /
• 1993

조화집중이동하중을 받는 무한보에서의 음향방사에 대한 연구는 선박, 비행기, 타이어 트레드 밴느 등과 같은 계의 설계시 계의 구조물로부터 발생하는 소음에 대한 해결방안을 제시해 준다. 구조물 표면에 발생하는 음향파워는 svktnqusghks방법을 이용하여 보의 전길이에 분포된 음향 인텐시티를 적분하여 구한다. 보의 표면에서 발생하는 음향파원는 미하수, 장력, 감쇠계수, 기초강성계수, 그리고 파수비에 의해서 결정된다. 각 인자에 따른 음향파워에 대한 정성적인 분석을 수행하기 위해 심프슨 적분방법을 이용하여 수치적분을 하였다. 무한보에 작용하는 유체하중에 3다라 진동에너지가 음향에너지로 변환되는 비율이 달라진다. 밀도가 큰 유체는 등가감쇠로 작용하여 보로부터 방사된 음향에너지는 빠르게 감소된다. 하중의 이동에 의하여 도플러이동효과가 발생하여 무한보의 공진부근에서의 음향파워 파크가 분리되고 보의 기초감쇠의 영향으로 음향에너지는 감소된다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.10 s.89
• /
• pp.938-943
• /
• 2004

In this paper, we propose a T-shaped DGS for CPW and provide the closed-form solutions for power loss rate, and bandwidth of the DGS. The proposed T-shaped DGS structure has a range of capacitance(C) 5.5 times wider than the dumbbell-shaped DGS structure. In addition we also analyze relations between R, L, C values of the DGS equivalent circuit and total loss rate, BW, $\omega_0$ of the DGS.

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.6_2
• /
• pp.943-948
• /
• 2020

In this paper, we developed a fiber optic interferometer system based on frequency-swept laser. This frequency-swept laser with an external-cavity structure can generate a high coherent light with a linewidth of 132 kHz at 1552 nm. It also shows a superior swept linearity of R2 = 0.99995 under repetition rate of 200 kHz due to absence of mechanical moving parts in the laser cavity. By using a piezoelectric fiber optic stretcher, various vibration experiments were implemented, such as 0.5 to 2.0 kHz vibration signals with intervals of 0.5 kHz, with a sampling rate of 7 kHz. Real-time peak tracking can be successfully recovered according to the applied vibration frequency with high linearity of R2 = 0.99983.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.3 no.1
• /
• pp.49-57
• /
• 2002

The possibility of a transmission noise reduction of piezoelectric smart panels using piezoelectric shunt damping is experimentally studied. Piezoelectric smart panel is basically a plate structure on which piezoelectric patch with shunt circuits is mounted and sound absorbing materials are bonded on the surface of the structure. Sound absorbing materials can absorb the sound transmitted at mid frequency region effectively while the use of piezoelectric shunt damping can reduce the transmission at resonance frequencies of the panel structure. To be able to reduce the sound transmission at low panel resonances, piezoelectric damping using the measured electrical impedance model is adopted. Resonant shunt circuit for piezoelectric shunt damping is composed of register and inductor in series, and they are determined by maximizing the dissipated energy throughout the circuit. The transmitted noise reduction performance of smart panels is investigated using an acoustic tunnel. The tunnel is a tube with square crosses section and a loud-speaker is mounted at one side of the tube as a sound source. Panels are mounted in the middle of the tunnel and the transmitted sound pressure across panels is measured. Noise reduction performance of a smart panels possessing absorbing material and/or air gap shows a good result at mid frequency region but little effect in the resonance frequency. By enabling the piezoelectric shunt damping, noise reduction of 10dB, 8dB is achieved at the resonance frequencise as well. Piezoelectric smart panels incorporating passive method and piezoelectric shunt damping are a promising technology for noise reduction in a broadband frequency.

• Geophysics and Geophysical Exploration
• /
• v.12 no.1
• /
• pp.132-142
• /
• 2009

The Tamar rift valley runs through the City of Launceston, Tasmania. Damage has occurred to city buildings due to earthquake activity in Bass Strait. The presence of the ancient valley, the Tamar valley, in-filled with soft sediments that vary rapidly in thickness from 0 to 250mover a few hundreds metres, is thought to induce a 2D resonance pattern, amplifying the surface motions over the valley and in Launceston. Spatially averaged coherency (SPAC), frequency-wavenumber (FK) and horizontal to vertical spectrum ratio (HVSR) microtremor survey methods are combined to identify and characterise site effects over the Tamar valley. Passive seismic array measurements acquired at seven selected sites were analysed with SPAC to estimate shear wave velocity (slowness) depth profiles. SPAC was then combined with HVSR to improve the resolution of these profiles in the sediments to an approximate depth of 125 m. Results show that sediments thicknesses vary significantly throughout Launceston. The top layer is composed of as much as 20m of very soft Quaternary alluvial sediments with a velocity from 50 m/s to 125 m/s. Shear-wave velocities in the deeper Tertiary sediment fill of the Tamar valley, with thicknesses from 0 to 250m vary from 400 m/s to 750 m/s. Results obtained using SPAC are presented at two selected sites (GUN and KPK) that agree well with dispersion curves interpreted with FK analysis. FK interpretation is, however, limited to a narrower range of frequencies than SPAC and seems to overestimate the shear wave velocity at lower frequencies. Observed HVSR are also compared with the results obtained by SPAC, assuming a layered earth model, and provide additional constraints on the shear wave slowness profiles at these sites. The combined SPAC and HVSR analysis confirms the hypothesis of a layered geology at the GUN site and indicates the presence of a 2D resonance pattern across the Tamar valley at the KPK site.