• Title/Summary/Keyword: 공정 중심 모델링

Search Result 37, Processing Time 0.023 seconds

Feasibility Study on Removal of Total Suspended Solid in Wastewater with Compressed Media Filter (압축성 여재 여과를 이용한 하수의 고형물질 제거 타당성 연구)

  • Kim, Yeseul;Jung, Chanil;Oh, Jeill;Yoon, Yeomin
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.36 no.2
    • /
    • pp.84-95
    • /
    • 2014
  • Recently, as a variety of techniques of CMF (Compressed media filter) that has advantages of high porosity and compressibility have been developed in the U.S. and Japan. Therefore, the interest of intensive wastewater treatment using CMF has grown. This study examined the feasibility of CMF with varying sewage water quality to determine the optimum operating conditions. A preliminary tracer test that investigated the filtering process under various compression and flow rate conditions was performed. In a high compression condition, different porosities were applied to each depth of the column. Therefore, a distinct difference between a theoretical value and results of tracer test was observed. For the TSS (Total suspended solid) removal and particle size distribution of CMF for pre-treatment water under the various compression conditions, the compression ratio of 30 percent as the optimal condition showed greater than 70% removal efficiency. In addition, the compression ratio of >15% was required to remove small-sized particles. Also, an additional process such as coagulation is necessary to increase the removal efficiency for < $10{\mu}m$ particles, since these small particles significantly influence the effluent concentration. Modeling results showed that as the compression rate was increased, TSS removal efficiency in accordance with each particle size in the initial filtration was noticeably observed. The modeling results according to the depth of column targeting $10{\mu}m$ particles having the largest percentage in particle size distribution showed that 150-300 mm in filter media layer was the most active with respect to the filtering.

Design and Fabrication of 32x32 Foveated CMOS Retina Chip for Edge Detection with Local-Light Adaptation (국소 광적응 기능을 가지는 윤곽검출용 32x32 방사형 CMOS 시각칩의 설계 및 제조)

  • Park, Dae-Sik;Park, Jong-Ho;Kim, Kyung-Moon;Lee, Soo-Kyung;Kim, Hyun-Soo;Kim, Jung-Hwan;Lee, Min-Ho;Shin, Jang-Kyoo
    • Journal of Sensor Science and Technology
    • /
    • v.11 no.2
    • /
    • pp.84-92
    • /
    • 2002
  • A $32{\times}32$ pixels foveated (linear-polar) structure retina chip with the function of local-light adaptation for edge detection has been designed and fabricated using CMOS technology. Human retina can detect a wide range of light intensity. In this study, we use the biologically-inspired visual signal processing mechanism that consists of photoreceptors, horizontal cells, and bipolar cells in order to implement the function of edge detection in the retina chip. For a local-light adaptive function, the size of receptive field is changed locally according to the input light intensity. The spatial distribution of sensing pixels in the foveated retina chip has the advantages of selective reduction of image data and good resolution in central part to carry out the elaborate image processing with still enough resolution in the outer parts. The designed chip has been fabricated using standard $0.6\;{\mu}m$ double-poly triple-metal CMOS technology and optimized using HSPICE simulator.

A Product Model Centered Integration Methodology for Design and Construction Information (프로덕트 모델 중심의 설계, 시공 정보 통합 방법론)

  • Lee Keun-Hyoung;Kim Jae-Jun
    • Proceedings of the Korean Institute Of Construction Engineering and Management
    • /
    • autumn
    • /
    • pp.99-106
    • /
    • 2002
  • Researches on integration of design and construction information from earlier era focused on the conceptual data models. Development and prevalent use of commercial database management system led many researchers to design database schemas for enlightening of relationship between non-graphic data items. Although these researches became the foundation fur the proceeding researches. they did not utilize the graphic data providable from CAD system which is already widely used. 4D CAD concept suggests a way of integrating graphic data with schedule data. Although this integration provided a new possibility for integration, there exists a limitation in data dependency on a specific application. This research suggests a new approach on integration for design and construction information, 'Product Model Centered Integration Methodology'. This methodology achieves integration by preliminary research on existing methodology using 4D CAD concept. and by development and application of new integration methodology, 'Product Model Centered Integration Methodology'. 'Design Component' can be converted into digital format by object based CAD system. 'Unified Object-based Graphic Modeling' shows how to model graphic product model using CAD system. Possibility of reusing design information in latter stage depends on the ways of creating CAD model, so modeling guidelines and specifications are suggested. Then prototype system for integration management, and exchange are presented, using 'Product Frameworker', and 'Product Database' which also supports multiple-viewpoints. 'Product Data Model' is designed, and main data workflows are represented using 'Activity Diagram', one of UML diagrams. These can be used for writing programming codes and developing prototype in order to automatically create activity items in actual schedule management system. Through validation processes, 'Product Model Centered Integration Methodology' is suggested as the new approach for integration of design and construction information.

  • PDF

Development of Buckling Restrained Brace Laterally Supported by Semicircular Springs (반원형 스프링으로 횡지지된 건식형 좌굴방지가새의 개발)

  • Park, Keum Sung;Lee, Sang Sup;Hong, Sung Yub;Bae, Kyu Woong
    • Journal of Korean Society of Steel Construction
    • /
    • v.26 no.6
    • /
    • pp.549-558
    • /
    • 2014
  • Buckling restrained braces(BRBs) developed as a seismic protection element, hysteretic damper, have been investigated in America and Japan mainly. BRBs are composed of a steel core and concrete-filled steel casing. It is one of the major causes of drop in productivity to fill the steel casing with concrete. To improve this problem, the BRB is introduced in which the steel core is restrained with a pair of semicircular springs. In this paper, the numerical and analytical investigation about the desirable configuration for a semicircular spring is presented. Firstly, the stiffness and strength of semicircular spring is determined theoretically to buckle into a very high-order modes. Then, the required stiffness and strength are calculated under the practical design conditions and considered as reference values to find a proper configuration. The material strength and thickness of semicircular spring are chose from the finite element analysis for 5 semicircular springs with varying height. Finally, the nonlinear buckling analysis of BRB with proper semicircular springs shows that the bucking strength of the whole BRB is very similar to the strength of steel core with length between semicircular springs.

Design Information Management System Core Development Using Industry Foundation Classes (IFC를 이용한 설계정보관리시스템 핵심부 구축)

  • Lee Keun-hyung;Chin Sang-yoon;Kim Jae-jun
    • Korean Journal of Construction Engineering and Management
    • /
    • v.1 no.2 s.2
    • /
    • pp.98-107
    • /
    • 2000
  • Increased use of computers in AEC (Architecture, Engineering and Construction) has expanded the amount of information gained from CAD (Computer Aided Design), PMIS (Project Management Information System), Structural Analysis Program, and Scheduling Program as well as making it more complex. And the productivity of AEC industry is largely dependent on well management and efficient reuse of this information. Accordingly, such trend incited much research and development on ITC (Information Technology in Construction) and CIC (Computer Integrated Construction) to be conducted. In exemplifying such effort, many researchers studied and researched on IFC (Industry Foundation Classes) since its development by IAI (International Alliance for Interoperability) for the product based information sharing. However, in spite of some valuable outputs, these researches are yet in the preliminary stage and deal mainly with conceptual ideas and trial implementations. Research on unveiling the process of the IFC application development, the core of the Design Information management system, and its applicable plan still need be done. Thus, the purpose of this paper is to determine the technologies needed for Design Information management system using IFC, and to present the key roles and the process of the IFC application development and its applicable plan. This system play a role to integrate the architectural information and the structural information into the product model and to group many each product items with various levels and aspects. To make the process model, we defined two activities, 'Product Modeling', 'Application Development', at the initial level. Then we decomposed the Application Development activity into five activities, 'IFC Schema Compile', 'Class Compile', 'Make Project Database Schema', 'Development of Product Frameworker', 'Make Project Database'. These activities are carried out by C++ Compiler, CAD, ObjectStore, ST-Developer, and ST-ObjectStore. Finally, we proposed the applicable process with six stages, '3D Modeling', 'Creation of Product Information', 'Creation and Update of Database', 'Reformation of Model's Structure with Multiple Hierarchies', 'Integration of Drawings and Specifications', and 'Creation of Quantity Information'. The IFCs, including the other classes which are going to be updated and developed newly on the construction, civil/structure, and facility management, will be used by the experts through the internet distribution technologies including CORBA and DCOM.

  • PDF

Numerical analysis of FEBEX at Grimsel Test Site in Switzerland (스위스 Grimsel Test Site에서 수행된 FEBEX 현장시험에 대한 수치해석적 연구)

  • Lee, Changsoo;Lee, Jaewon;Kim, Geon-Young
    • Tunnel and Underground Space
    • /
    • v.30 no.4
    • /
    • pp.359-381
    • /
    • 2020
  • Within the framework of DECOVALEX-2019 Task D, full-scale engineered barriers experiment (FEBEX) at Grimsel Test Site was numerically simulated to investigate an applicability of implemented Barcelona basic model (BBM) into TOUGH2-MP/FLAC3D simulator, which was developed for the prediction of the coupled thermo-hydro-mechanical behavior of bentonite buffer. And the calculated heater power, temperature, relative humidity, total stress, saturation, water content and dry density were compared with in situ data monitored in the various sections. In general, the calculated heater power and temperature provided a fairly good agreement with experimental observations, however, the difference between power of heater #1 and that of heater #2 could not captured in the numerical analysis. It is necessary to consider lamprophyre with low thermal conductivity around heater #1 and non-simplified installation progresses of bentonite blocks in the tunnel for better modeling results. The evolutions and distributions of relative humidity were well reproduced, but hydraulic model needs to be modified because the re-saturation process was relatively fast near the heaters. In case of stress evolutions due to the thermal and hydraulic expansions, the computed stress was in good agreement with the data. But, the stress is slightly higher than the measured in situ data at the early stage of the operation, because gap between rock mass and bentonite blocks have not been considered in the numerical simulations. The calculated distribution of saturation, water content, and dry density along the radial distance showed good agreement with the observations after the first and final dismantling. The calculated dry density near the center of the FEBEX tunnel and heaters were overestimated compared with the observations. As a result, the saturation and water content were underestimated with the measurements. Therefore, numerical model of permeability is needed to modify for the production of better numerical results. It will be possible to produce the better analysis results and more realistically predict the coupled THM behavior in the bentonite blocks by performing the additional studies and modifying the numerical model based on the results of this study.

The Production Techniques of Korean Dried-lacquer Buddha Statue seen through the Seated Dried-lacquer Bodhisattva Statue in Okura Museum of Art in Tokyo (도쿄 오쿠라슈코칸 협저보살좌상(東京 大倉集古館 夾紵菩薩坐像)을 통하여 본 한국 협저불상의 제작기법)

  • Jeong, Ji-yeon
    • Korean Journal of Heritage: History & Science
    • /
    • v.46 no.3
    • /
    • pp.172-193
    • /
    • 2013
  • This study examines the production techniques and raw materials shown in the Korean dried-lacquer statues of Buddha through a careful observation of the Seated Dried-lacquer Bodhisattva Statue from the late Goryeo Dynasty which is currently possessed by Okura Museum of Art in Tokyo. As a method of study, the X-ray data and the results from a field survey were combined to analyze the production techniques and the characteristics of raw materials. Based on this analysis, a hypothesis was established on the production process and verified through a reenactment of the actual production process. Then, the characteristics of the techniques applied to each process and the raw materials were recorded in detail. Specifically, the dried lacquer techniques and the raw materials were estimated based on the results of naked-eye observation in comparison with the literature, especially the records of "Xiu Shi Lu" written by Huang Cheng of the Ming Dynasty which is considered as 'the textbook of lacquer techniques.' The raw materials used in the production of the traditional Korean lacquerware inlaid with mother-of-pearl were also referenced. As a result, it was found that the features of production techniques and the raw materials found in the Statue at Okura Museum of Art have many similarities with those of the Seated Dried-lacquer Statue of Lohan (Arhat) from Yuanfu 2 Nian Ming (1098) of the Song Dynasty which is currently at the Honolulu Museum of Art. In particular, the similarities include that the interior of the statue being vacant because the clay and the wood core were not replaced after being removed from the prototype, that the complete form was made in the clay forming stage to apply the lacquer with baste fiber fabric, that the clay and the wood core were removed through the bottom of the statue, and that the modeling stage was omitted and the final coat over the statue is very thin. Additionally, decorating with ornaments like Bobal and Youngrak made of plastic material was a technique widely popular in the Song Dynasty, suggesting that the Seated Dried-lacquer Bodhisattva Statue in Okura Museum of Art was greatly affected by the production techniques of the Dried-lacquer Buddha Statue from the Song Dynasty. There is no precise record on the origin and history of the Korean Dried-lacquer Buddha Statues and the number of existing works is also very limited. Even the records in "Xuanhe Fengshi Gaoli Tujing" that tells us about the origin of the Dried-lacquer Buddha Statue from the Yuan Feng Period (1078~1085) do not indicate the time of transmission. It is also difficult to trace the clear route of transmission of production techniques through existing Dried-lacquer Buddha Statues. Fortunately, this study could at least reveal that the existing Dried-lacquer Buddha Statues of Korea, including the one at Okura Museum of Art, have applied the production techniques rather differently from those used in the production of Japanese Datsukatsu Dried-lacquer Buddha Statues that have been known as the standard rule in making dried-lacquer statues of Buddha for a long time.