• Proceedings of the KSEEG Conference
• /
• 2003.04a
• /
• pp.76-79
• /
• 2003

국내의 토양오염 공정시험방법에서는 Zn, Ni 추출시 산분해법에 가까운 방법을 사용하는 반면, Cd, Cu, Pb, $Cr^{6+}$ 추출시 0.1N HCl용액으로 산처리하여 1시간을 진탕한 후 이를 필터로 여과하여 분석용액을 추출하는 용출법을 사용하고 있다(환경부, 2001). 시료내에는 완충 물질이 존재하기 때문에 용출법 사용시 초기 pH 인 1(0.1N HCl)이 유지되지 않아 완충능력이 높은 토양의 경우 현재 국내 공정법상의 용출법이 중금속 오염정도를 추정하는데 적절치 않을 수 있다. (중략)

• Economic and Environmental Geology
• /
• v.36 no.3
• /
• pp.159-170
• /
• 2003

Heavy metals are extracted from Chonju stream sediment, roadside soils and sediments along Honam expressway, soils and tailings from mining area using three different methods (partial extraction in Standard Method, partial extraction method with maintaining 0.1 N of extraction solution and Sequential Extraction Method). In samples having buffer capacity against acid, pH 1 (0.1 N HCl) of extraction solution can not be maintained and pH of extraction solution increases up to 8.0 when partial extraction in Standard Method is used. The averages and ranges of HPE(heavy metals extracted using partial extraction in Standard Method)/HPEM(heavy metals extracted using partial extraction method with maintaining 0.1 N of extraction solution) values are 0.479 and 0.145~0.929 for Cd, 0.534 and 0.078~0.928 for Zn, 0.432 and 0.041~0.992 for Mn, 0.359 and 0.011~0.874 for Cu, 0.150 and 0.018~0.530 for Cr, 0.219 and 0.003~0.853 for Pb, and 0.088 and 1.73${\times}$10$^{-5}$~0.303 for Fe. These data indicate that the difference between HPE and HPEM is large in the order of Fe, Cr, Pb, Cu, Mn, Cd and Zn. The amounts of heavy metals extracted decreases in the follow order; Sum III(sum of fraction I, II, III in sequential extraction)>HPEM>Sum III (sum of fraction I and II)>HPE for Zn, Cd and Mn and Sum III>HPEM>HPE for Cr and Fe. In the case Cr, Sum II is lower than HPEM and higher than HPE. In case of Cu, extracted heavy metals is large in the order Sum IV>HPEM>Sum III HPE. HPE/HPEM value decreases with increasing the amount of HCl used for maintaining 0.1 N of extraction solution. For samples with high buffer capacity, HPE/HPEM value in all elements is lower than 0.2. On the other hand, for samples with low buffer capacity, HPE/HPEM value are over 0.2 and many samples have values higher than 0.6 for Zn, Cd Mn and Cu due to the small difference between Sum II and Sum III, and relatively higher mobility. However, for Fe and Cr, HPE/HPEM value is below 0.2 even for samples with low buffer capacity due to their low mobility and big difference between Sum II and Sum III. This study indicates that the partial extraction method in Korean Standard Method of soil is not suitable for an assessment of soil contamination in area where buffer capacity of soil can be decreased or lost because of a long term exposure to environmental damage such as acidic rain.

• Analytical Science and Technology
• /
• v.11 no.5
• /
• pp.394-399
• /
• 1998

This study was carried out to characterize the chemical composition and leaching properties of heavy metals in coal fly ash, which was generated from Korean electrical power utilities in several million tons per year. Comparion with respect to the leachability of heavy metals between the Korea standard leaching test (KSLT) and the American Environment Protection Agency (EPA) method 1311 (TCLP: Toxicity Chracteristic Leaching Procedure) was performed. The concentration of Ag, As, Ba, Cd, Cr, Cu, Pb, Se, Hg in the leacheate was determined by ICP-MS. The analytical result showed a significant difference of the leachability according to the characteristics of the leaching solution except Se, suggesting the necessity of improvement in the leaching test method that is currently implemented in Korea.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.11
• /
• pp.1207-1212
• /
• 2006

In this study, Chemical Oxygen Demand(COD) which is the measure of organic substances, Total nitrogen(T-N), Total phosphorous(T-P), Fe and Mn were analyzed in the sediments of dam reservoir. The purpose of this study were to understand the relevances among the analytical methods adopted and the applicabilities of those methods. For the determination of COD, Standard Method for the Examination of Marine Environment(SMEME) and Standard Method for the Examination of Sanitary(SMES) was used. Both method had wide dynamic range and the deviations of the values obtained by two methods were small because $KMnO_4$ method closely reflected BOD and organic substances. For the determination of T-N and T-P, Standard Method for the Examination of Food(SMEF) and Standard Method for the Examination of Sanitary(SMES) were used. Two methods for T-N were both the acid-base titration but SMES gave less T-N values than SMEF because of the differences in digestion and distillation steps. Two methods for T-P gave the comparable values after acid digestion of $HNO_3$ and $HClO_4$. The determination of heavy metals as a Fe, Mn was mainly divided to the leaching method and acid digestion method. The values obtained by leaching method were less than those by digestion method. It is thought that the condition of acid digestion was more severe than that of leaching method.

• Journal of Soil and Groundwater Environment
• /
• v.6 no.1
• /
• pp.63-83
• /
• 2001

Heavy metals are extracted from stream sediments, roadside soils and sediments and soils and tailings from mining area using partial extraction, acid digestion and HF-digestion. Compared to amounts of heavy metals extracted using partial extraction, those extracted using acid digestion are higher by 2.0∼221 times in Cu, 2.4∼2806 times in Pb, 1.3∼121 times in Cd, 14. 1∼1300885 times in Fe, 1.2∼272 times in Mn, 1.3∼373 times in Zn, 2.2∼1735 times in Cr. There is no special relationship between the extracted amounts of heavy metals using partial extraction and those using acid digestion. However, it is possible that there is a certain relationship between those using acid digestion and those using HF-digestion. Although partial extraction, which extracts less amounts of heavy metals (Cd, Cu, Pb) from soil compared to acid digestion, is used in domestic standard method for examination of soil, domestic soil standard for heavy metals in non-agricultural and industrial areas is higher than soil standard in foreign countries which use acid digestion. For improvement of the domestic standard method for assessment of soil, it is suggested to lower the domestic soil standard for heavy metals or to change pretreatment method for extracting heavy metals from partial extraction to acid digestion with modifying the soil standard.

• Journal of Soil and Groundwater Environment
• /
• v.8 no.2
• /
• pp.62-69
• /
• 2003

The aim of research is the evaluation of the $Cr^{6+}$ emission features of the liquid injection through emission experiments in varying conditions, based on a field-mixing ratio. The results showed that the content of $Cr^{6+}$ content in cement measured had an Ordinary Potland Cement (OPC) of 25.3 mg/kg, which constitute the largest portion among the other materials. Likewise, the emission experiment of homo-gel and sand-gel generally satisfied the standard of KSLT (Korea Standard Leaching Test) in waste of 1.5 mg/L, but in case of the standard of KSLT in soil the emission of OPC $Cr^{6+}$ of 4.85 mg/kg. These conditions is a little exceeded the criteria in the ‘Ga’ area in terms of Korea Soil Environmental Preservation Law. In addition, results generated by the mock-up injection facilities revealed that $Cr^{6+}$ emission increased as Water/Cement and injection pressure increased. At injection pressure higher than 4 kg/㎤, $Cr^{6+}$ emission exceeded the water preservation standard of 0.5 mg/L. Similarly, a pattern experiment of C $r^{6+}$ emission according to pH was conducted, in order to evaluate the $Cr^{6+}$ emission features of grout materials in leachate below pH 5 such as pH 4 acid rain or landfill. Results show that $Cr^{6+}$ emission dramatically increased in high acidic or basic state. It indicates that $Cr^{6+}$ emission will probably increase in an environment where grout materials are injected. On the other hand, concentration of leachate was determined in areas where grout materials are used. The results show that the concentration of emission in an ultra purity condition does not manifest intensity, and is affected in the OPC>MC>SC order. It means that the pollutants or $Cr^{6+}$ emission increases with decreasing concentration. As such, $Cr^{6+}$ emission will probably exceed the countermeasure criteria according to the types of gout materials. Similarly, high pressure or injection will cause increased $Cr^{6+}$ emission. Therefore, the selection of materials or mixing ratio should be considered in general as well as according to specific industries, based on the strength and pH of $Cr^{6+}$ emission.

• Journal of the Korean Geotechnical Society
• /
• v.17 no.2
• /
• pp.143-150
• /
• 2001

최근 국내에서는 건설재료의 부족으로 건설부산물인 폐콘크리트를 새로운 토목재료로써 재활용 또는 자원화에 노력하고 있다. 이러한 차원에서 폐콘크리트의 재활용 및 자원화는 사용용도에 적합한 공학적 특성뿐만 아니라 환경적 특성을 분석하여 대상재료의 환경 안정성을 파악해야 한다. 따라서, 본 논문은 폐콘크리트에 대하여 pH시험, 용출시험, 중금속 흡착특성 등 일련의 환경특성 실험을 실시하여 폐콘크리트 사용에 따른 주변 환경에 미치는 영향을 분석하였다. 실험결과, 폐콘크리트의 pH는 11~12정도이고, 폐기물공정시험법과 TCLP법에 의한 용출시험은 법적기준에 모두 만족하는 것으로 나타났다. 또한 중금속 흡착시험은 폐콘크리트나 구리, 납, 카드늄의 제거능이 큰 것으로 나타났으나 반면, 크롬에 대해서는 제거율이 50%정도로 나타났다.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.7
• /
• pp.665-675
• /
• 2010

The effects of chemical binders (ladle slag, ordinary portland cement (OPC), hydroxyapatite and calcium hydroxide) on the solidification/stabilization of heavy metals (Cd, Cu, Ni, Pb, Zn) in sewage sludge were evaluated by chemical leaching tests such as EDTA extraction, TCLP and sequential extraction. The results of EDTA extraction showed that heavy metal concentrations in sewage sludge were highly reduced after solidification/stabilization with slag, cement or calcium hydroxide. However, EDTA interrupted solidification/stabilization of heavy metals by hydroxyapatite. The TCLP-extracted heavy metal concentrations in sewage sludge after solidification/stabilization with chemical amendments were highly reduced. However, Cu concentration in the sewage sludge solidified/stabilized with slag, cement or calcium hydroxide increased because the pH of TCLP solution was higher than 7. Mixtures of sludge 1 : slag 0.2 : calcium hydroxide 0.1 (wt ratio) showed the least leachability in batch TCLP and EDTA extraction. The results of sequential extraction (SM&T, formaly BCR) indicated that the distribution of heavy metals changed from exchangable and carbonate fractions to strongly bound organic fraction. It was found that maximum leachate concentrations of Ba, Cd, Cr and Pb from sewage sludge amended with slag and calcium hydroxide were far below US EPA TCLP regulations.

• Resources Recycling
• /
• v.19 no.2
• /
• pp.54-62
• /
• 2010

In order to obtain the basic data for recycling of coal mine tailings, the characteristics of coal mine tailings, the formation of AMD from the tailings and the leaching of heavy metal from the tailings were studied. The samples were characterized in terms of chemical composition, mineral composition and content of heavy metal of the tailings were investigated. The effects of time, temperature, content of pyrite, sulfide minerals on the formation of AMD were also investigated. For the leaching tests, the KS method, TCLP method and column test were used. From the investigated data, we can see that the coal mine tailings can be used as aggregate for filling used gallery. We can also see that the formation of AMD from coal mine tailings can be prevented by mixing 4% or more limestone with it.

• Analytical Science and Technology
• /
• v.10 no.6
• /
• pp.395-402
• /
• 1997

The comparison study between EPA method 3050 and the test method offered by Ministry of Environment in Korea was performed to investigate a matrix effect on extraction. In this study, 12 inorganic priority pollutants(Cd, Cr, Cu, Pb, Ni, Zn, As, Sb, Se, Hg, Be, Tl) were spiked to the sludges and estuary sediment samples. The extracts were analyzed by AAS, HG-AAS, and ICP/MS. Results were discussed in terms of recoveries, relative standard deviations, and the method detection limits. Mean recovery of the elements except As, Sb, and Se was 93% when the procedure of EPA method was applied. The Korean extraction method, however. showed a significant matrix effect to give very poor recoveries.